Index: 1.0.2u/Makefile
===================================================================
--- 1.0.2u/Makefile (nonexistent)
+++ 1.0.2u/Makefile (revision 5)
@@ -0,0 +1,293 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+NOT_PARALLEL = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/n/openssl10
+
+REQUIRES = libs/zlib/1.2.13
+REQUIRES += libs/gmp/6.2.1
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 1.0.2u
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/n/openssl10/openssl-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/openssl-$(version)
+src_dir_name = openssl-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_JZ47XX_GLIBC) $(TOOLCHAIN_P5600_GLIBC)),)
+OPT_PATCHES = PATCHES.mips32-O2
+endif
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+cron_script = $(CURDIR)/cron/certwatch
+
+
+####### Targets
+
+PKG_GROUP = net
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+OPENSSL_PKG_NAME = openssl10
+OPENSSL_PKG_VERSION = 1.0.2u
+OPENSSL_PKG_ARCH = $(PKGARCH)
+OPENSSL_PKG_DISTRO_NAME = $(DISTRO_NAME)
+OPENSSL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+OPENSSL_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+OPENSSL_PKG_SHORT_DESCRIPTION = Secure Sockets Layer toolkit 1.0.x
+OPENSSL_PKG_URL = $(BUG_URL)
+OPENSSL_PKG_LICENSE = GPLv2
+OPENSSL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(OPENSSL_PKG_NAME)-pkg-description
+OPENSSL_PKG_DESCRIPTION_FILE_IN = $(OPENSSL_PKG_NAME)-pkg-description.in
+OPENSSL_PKG_INSTALL_SCRIPT = $(OPENSSL_PKG_NAME)-pkg-install.sh
+
+OPENSSL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(OPENSSL_PKG_NAME)-package
+
+pkg_basename = $(OPENSSL_PKG_NAME)-$(OPENSSL_PKG_VERSION)-$(OPENSSL_PKG_ARCH)-$(OPENSSL_PKG_DISTRO_NAME)-$(OPENSSL_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = INSTALL_PREFIX=$(OPENSSL_PKG)
+
+
+# These are the known patent issues with OpenSSL:
+# name | expires
+# -------+------------------------------------
+# MDC-2: | 4,908,861 2007-03-13, not included
+# IDEA: | 5,214,703 2010-05-25, not included
+# RC5: | 5,724,428 2015-03-03, not included
+#
+# Although all of the above are expired, it's still
+# probably not a good idea to include them as there
+# are better algorithms to use.
+#
+extra_configure_switches = --libdir=lib$(LIBSUFFIX)/openssl-1.0
+extra_configure_switches += --openssldir=/etc/ssl
+extra_configure_switches += no-mdc2
+extra_configure_switches += no-idea
+extra_configure_switches += no-rc5
+extra_configure_switches += no-sse2
+extra_configure_switches += no-ssl2
+extra_configure_switches += no-weak-ssl-ciphers
+extra_configure_switches += zlib-dynamic
+extra_configure_switches += shared
+
+
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_I586_GLIBC)),)
+arch = i586
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_I686_GLIBC)),)
+arch = i686
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_X86_64_GLIBC)),)
+arch = x86_64
+openssl_environment = KERNEL_BITS=64
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_A1X_GLIBC) $(TOOLCHAIN_A2X_GLIBC) \
+ $(TOOLCHAIN_H3_GLIBC) $(TOOLCHAIN_RK328X_GLIBC) \
+ $(TOOLCHAIN_S8XX_GLIBC) $(TOOLCHAIN_IMX6_GLIBC) \
+ $(TOOLCHAIN_AM335X_GLIBC) $(TOOLCHAIN_OMAP543X_GLIBC)),)
+arch = arm
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_H5_GLIBC) $(TOOLCHAIN_RK33XX_GLIBC) \
+ $(TOOLCHAIN_RK339X_GLIBC) $(TOOLCHAIN_S9XX_GLIBC) \
+ $(TOOLCHAIN_A311X_GLIBC) $(TOOLCHAIN_M1000_GLIBC)),)
+arch = aarch64
+openssl_environment = KERNEL_BITS=64
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_JZ47XX_GLIBC) $(TOOLCHAIN_P5600_GLIBC)),)
+arch = mips32
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8_GLIBC) $(TOOLCHAIN_POWER9_GLIBC)),)
+arch = ppc64
+openssl_environment = KERNEL_BITS=64
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8LE_GLIBC) $(TOOLCHAIN_POWER9LE_GLIBC)),)
+arch = ppc64le
+openssl_environment = KERNEL_BITS=64
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_RISCV64_GLIBC)),)
+arch = generic64
+openssl_environment = KERNEL_BITS=64
+endif
+
+openssl_environment += MACHINE=$(arch) SYSTEM=Linux
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ $(call apply-opt-patches, $(SRC_DIR))
+ @( cd $(SRC_DIR) ; \
+ find . -name "*.pod" -exec sed -i "s/^\=item \([0-9]\)\(\ \|\.\|$$\)/\=item C<\1>/g" {} \; \
+ )
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_I586_GLIBC)),)
+ @( cd $(SRC_DIR) ; \
+ sed -i "/linux-elf/s/fomit-frame-pointer/fomit-frame-pointer -march=i586 -mtune=i586/g" Configure ; \
+ )
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_I686_GLIBC)),)
+ @( cd $(SRC_DIR) ; \
+ sed -i "/linux-elf/s/fomit-frame-pointer/fomit-frame-pointer -march=i686 -mtune=i686/g" Configure ; \
+ )
+endif
+ @touch $@
+
+$(build_target): $(src_done)
+ @cd $(SRC_DIR) && \
+ $(BUILD_ENVIRONMENT) $(openssl_environment) ./config \
+ --prefix=/usr \
+ $(extra_configure_switches) \
+ $(ARCH_FLAGS) \
+ $(HW_FLAGS)
+ # ======= workaround for crypto/evp/... =======
+ @( cd $(SRC_DIR)/include/openssl ; \
+ ln -sf ../../crypto/idea/idea.h idea.h ; \
+ ln -sf ../../crypto/mdc2/mdc2.h mdc2.h ; \
+ ln -sf ../../crypto/rc5/rc5.h rc5.h ; \
+ )
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) -j1
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(OPENSSL_PKG)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 MANDIR=/usr/share/man install $(env_sysroot)
+ifneq ($(__ENABLE_STATIC__),yes)
+ @rm -f $(OPENSSL_PKG)/usr/lib$(LIBSUFFIX)/openssl-1.0/*.a
+endif
+ @rm -rf $(OPENSSL_PKG)/etc
+ @rm -rf $(OPENSSL_PKG)/usr/share
+ @mkdir -p $(OPENSSL_PKG)/usr/include/openssl-1.0
+ @mv $(OPENSSL_PKG)/usr/include/openssl $(OPENSSL_PKG)/usr/include/openssl-1.0/openssl
+ @mv $(OPENSSL_PKG)/usr/bin/openssl $(OPENSSL_PKG)/usr/bin/openssl-1.0
+ @rm -f $(OPENSSL_PKG)/usr/bin/c_rehash
+ @sed -e 's,/include$$,/include/openssl-1.0,' -i $(OPENSSL_PKG)/usr/lib$(LIBSUFFIX)/openssl-1.0/pkgconfig/*.pc
+ @mkdir -p $(OPENSSL_PKG)/lib$(LIBSUFFIX)/openssl-1.0
+ @( cd $(OPENSSL_PKG)/usr/lib$(LIBSUFFIX)/openssl-1.0 ; \
+ chmod +w lib*.so.?.?.? ; \
+ mv lib*.so.?.?.? ../../../lib$(LIBSUFFIX)/openssl-1.0 ; \
+ ln -sf ../../../lib$(LIBSUFFIX)/openssl-1.0/lib*.so.?.?.? . ; \
+ ln -sf libcrypto.so.?.?.? libcrypto.so.1 ; \
+ ln -sf libssl.so.?.?.? libssl.so.1 ; \
+ cp -a lib*.so.? ../../../lib$(LIBSUFFIX)/openssl-1.0 ; \
+ )
+ @chmod +w $(OPENSSL_PKG)/usr/lib$(LIBSUFFIX)/openssl-1.0/engines/*.so
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(OPENSSL_PKG))
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/openssl-1.0/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcrypto.pc libssl.pc openssl.pc \
+ )
+ # ======= Strip binaries =======
+ @( cd $(OPENSSL_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(OPENSSL_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ @touch $@
+
+$(OPENSSL_PKG_DESCRIPTION_FILE): $(OPENSSL_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(OPENSSL_PKG_DESCRIPTION_FILE) $(OPENSSL_PKG_INSTALL_SCRIPT)
+ @cp $(OPENSSL_PKG_DESCRIPTION_FILE) $(OPENSSL_PKG)/.DESCRIPTION
+ @cp $(OPENSSL_PKG_INSTALL_SCRIPT) $(OPENSSL_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(OPENSSL_PKG)/.REQUIRES
+ @echo "pkgname=$(OPENSSL_PKG_NAME)" > $(OPENSSL_PKG)/.PKGINFO ; \
+ echo "pkgver=$(OPENSSL_PKG_VERSION)" >> $(OPENSSL_PKG)/.PKGINFO ; \
+ echo "arch=$(OPENSSL_PKG_ARCH)" >> $(OPENSSL_PKG)/.PKGINFO ; \
+ echo "distroname=$(OPENSSL_PKG_DISTRO_NAME)" >> $(OPENSSL_PKG)/.PKGINFO ; \
+ echo "distrover=$(OPENSSL_PKG_DISTRO_VERSION)" >> $(OPENSSL_PKG)/.PKGINFO ; \
+ echo "group=$(OPENSSL_PKG_GROUP)" >> $(OPENSSL_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(OPENSSL_PKG_SHORT_DESCRIPTION)\"" >> $(OPENSSL_PKG)/.PKGINFO ; \
+ echo "url=$(OPENSSL_PKG_URL)" >> $(OPENSSL_PKG)/.PKGINFO ; \
+ echo "license=$(OPENSSL_PKG_LICENSE)" >> $(OPENSSL_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(OPENSSL_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 1.0.2u/PATCHES
===================================================================
--- 1.0.2u/PATCHES (nonexistent)
+++ 1.0.2u/PATCHES (revision 5)
@@ -0,0 +1,3 @@
+
+../../../sources/packages/n/openssl10/patches/openssl-1.0.2u-versioned-symbols.patch -p0
+../../../sources/packages/n/openssl10/patches/openssl-1.0.2u-shlib.patch -p0
Index: 1.0.2u/PATCHES.mips32-O2
===================================================================
--- 1.0.2u/PATCHES.mips32-O2 (nonexistent)
+++ 1.0.2u/PATCHES.mips32-O2 (revision 5)
@@ -0,0 +1,2 @@
+
+../../../sources/packages/n/openssl10/patches/openssl-1.0.2u-mips-O2.patch -p0
Index: 1.0.2u/openssl10-pkg-description.in
===================================================================
--- 1.0.2u/openssl10-pkg-description.in (nonexistent)
+++ 1.0.2u/openssl10-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+openssl10: openssl10 @VERSION@ (Secure Sockets Layer toolkit 1.0.x)
+openssl10:
+openssl10: The OpenSSL certificate management tool and the shared libraries
+openssl10: that provide various encryption and decryption algorithms and
+openssl10: protocols.
+openssl10: This product includes software developed by the OpenSSL Project for
+openssl10: use in the OpenSSL Toolkit (http://www.openssl.org). This product
+openssl10: includes cryptographic software written by Eric Young
+openssl10: (eay@cryptsoft.com). This product includes software written by Tim
+openssl10: Hudson (tjh@cryptsoft.com).
+openssl10:
Index: 1.0.2u/openssl10-pkg-install.sh
===================================================================
--- 1.0.2u/openssl10-pkg-install.sh (nonexistent)
+++ 1.0.2u/openssl10-pkg-install.sh (revision 5)
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: 1.0.2u/openssl10-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 1.0.2u
===================================================================
--- 1.0.2u (nonexistent)
+++ 1.0.2u (revision 5)
Property changes on: 1.0.2u
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 1.0.2u-ppc32/Makefile
===================================================================
--- 1.0.2u-ppc32/Makefile (nonexistent)
+++ 1.0.2u-ppc32/Makefile (revision 5)
@@ -0,0 +1,188 @@
+
+COMPONENT_TARGETS = $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+NOT_PARALLEL = true
+
+CREATE_PPC32_PACKAGE = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/n/openssl10
+
+REQUIRES = net/openssl10/1.0.2u
+REQUIRES += libs/zlib/1.2.13-ppc32
+REQUIRES += libs/gmp/6.2.1-ppc32
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 1.0.2u
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/n/openssl10/openssl-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/openssl-$(version)
+src_dir_name = openssl-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = net
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+OPENSSL32_PKG_NAME = openssl10-x32
+OPENSSL32_PKG_VERSION = 1.0.2u
+OPENSSL32_PKG_ARCH = $(PKGARCH)
+OPENSSL32_PKG_DISTRO_NAME = $(DISTRO_NAME)
+OPENSSL32_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+OPENSSL32_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+OPENSSL32_PKG_SHORT_DESCRIPTION = Secure Sockets Layer toolkit 1.0.x
+OPENSSL32_PKG_URL = $(BUG_URL)
+OPENSSL32_PKG_LICENSE = GPLv2
+OPENSSL32_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(OPENSSL32_PKG_NAME)-pkg-description
+OPENSSL32_PKG_DESCRIPTION_FILE_IN = $(OPENSSL32_PKG_NAME)-pkg-description.in
+OPENSSL32_PKG_INSTALL_SCRIPT = $(OPENSSL32_PKG_NAME)-pkg-install.sh
+
+OPENSSL32_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(OPENSSL32_PKG_NAME)-package
+
+pkg_basename = $(OPENSSL32_PKG_NAME)-$(OPENSSL32_PKG_VERSION)-$(OPENSSL32_PKG_ARCH)-$(OPENSSL32_PKG_DISTRO_NAME)-$(OPENSSL32_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = INSTALL_PREFIX=$(OPENSSL32_PKG)
+
+
+extra_configure_switches = --libdir=lib$(MULTILIB_PPC32_SUFFIX)/openssl-1.0
+extra_configure_switches += --openssldir=/etc/ssl
+extra_configure_switches += no-mdc2
+extra_configure_switches += no-idea
+extra_configure_switches += no-rc5
+extra_configure_switches += no-sse2
+extra_configure_switches += no-ssl2
+extra_configure_switches += no-weak-ssl-ciphers
+extra_configure_switches += zlib-dynamic
+extra_configure_switches += shared
+
+openssl_environment = KERNEL_BITS=32 MACHINE=ppc64 SYSTEM=Linux
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @( cd $(SRC_DIR) ; \
+ find . -name "*.pod" -exec sed -i "s/^\=item \([0-9]\)\(\ \|\.\|$$\)/\=item C<\1>/g" {} \; \
+ )
+ @touch $@
+
+$(build_target): $(src_done)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(openssl_environment) ./config \
+ --prefix=/usr \
+ $(extra_configure_switches) \
+ $(ARCH_FLAGS) \
+ $(HW_FLAGS)
+ # ======= workaround for crypto/evp/... =======
+ @( cd $(SRC_DIR)/include/openssl ; \
+ ln -sf ../../crypto/idea/idea.h idea.h ; \
+ ln -sf ../../crypto/mdc2/mdc2.h mdc2.h ; \
+ ln -sf ../../crypto/rc5/rc5.h rc5.h ; \
+ )
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) -j1
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(OPENSSL32_PKG)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 MANDIR=/usr/share/man install $(env_sysroot)
+ifneq ($(__ENABLE_STATIC__),yes)
+ @rm -f $(OPENSSL32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX)/openssl-1.0/*.a
+endif
+ @mkdir -p $(OPENSSL32_PKG)/usr/bin/32
+ @( cd $(OPENSSL32_PKG)/usr/bin ; \
+ rm -f c_rehash ; \
+ mv openssl 32/openssl-1.0 ; \
+ )
+ @sed -e 's,/include$$,/include/openssl-1.0,' -i $(OPENSSL32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX)/openssl-1.0/pkgconfig/*.pc
+ @mkdir -p $(OPENSSL32_PKG)/lib$(MULTILIB_PPC32_SUFFIX)/openssl-1.0
+ @( cd $(OPENSSL32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX)/openssl-1.0 ; \
+ chmod +w lib*.so.?.?.? ; \
+ mv lib*.so.?.?.? ../../../lib$(MULTILIB_PPC32_SUFFIX)/openssl-1.0 ; \
+ ln -sf ../../../lib$(MULTILIB_PPC32_SUFFIX)/openssl-1.0/lib*.so.?.?.? . ; \
+ ln -sf libcrypto.so.?.?.? libcrypto.so.1 ; \
+ ln -sf libssl.so.?.?.? libssl.so.1 ; \
+ cp -a lib*.so.? ../../../lib$(MULTILIB_PPC32_SUFFIX)/openssl-1.0 ; \
+ )
+ @chmod +w $(OPENSSL32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX)/openssl-1.0/engines/*.so
+ @rm -rf $(OPENSSL32_PKG)/etc
+ @rm -rf $(OPENSSL32_PKG)/usr/include
+ @rm -rf $(OPENSSL32_PKG)/usr/share
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(OPENSSL32_PKG))
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_PPC32_SUFFIX)/openssl-1.0/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcrypto.pc libssl.pc openssl.pc \
+ )
+ # ======= Strip binaries =======
+ @( cd $(OPENSSL32_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(OPENSSL32_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ @touch $@
+
+$(OPENSSL32_PKG_DESCRIPTION_FILE): $(OPENSSL32_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(OPENSSL32_PKG_DESCRIPTION_FILE) $(OPENSSL32_PKG_INSTALL_SCRIPT)
+ @cp $(OPENSSL32_PKG_DESCRIPTION_FILE) $(OPENSSL32_PKG)/.DESCRIPTION
+ @cp $(OPENSSL32_PKG_INSTALL_SCRIPT) $(OPENSSL32_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(OPENSSL32_PKG)/.REQUIRES
+ @echo "pkgname=$(OPENSSL32_PKG_NAME)" > $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "pkgver=$(OPENSSL32_PKG_VERSION)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "arch=$(OPENSSL32_PKG_ARCH)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "distroname=$(OPENSSL32_PKG_DISTRO_NAME)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "distrover=$(OPENSSL32_PKG_DISTRO_VERSION)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "group=$(OPENSSL32_PKG_GROUP)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(OPENSSL32_PKG_SHORT_DESCRIPTION)\"" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "url=$(OPENSSL32_PKG_URL)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "license=$(OPENSSL32_PKG_LICENSE)" >> $(OPENSSL32_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(OPENSSL32_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 1.0.2u-ppc32/PATCHES
===================================================================
--- 1.0.2u-ppc32/PATCHES (nonexistent)
+++ 1.0.2u-ppc32/PATCHES (revision 5)
@@ -0,0 +1,3 @@
+
+../../../sources/packages/n/openssl10/patches/openssl-1.0.2u-versioned-symbols.patch -p0
+../../../sources/packages/n/openssl10/patches/openssl-1.0.2u-shlib.patch -p0
Index: 1.0.2u-ppc32/openssl10-x32-pkg-description.in
===================================================================
--- 1.0.2u-ppc32/openssl10-x32-pkg-description.in (nonexistent)
+++ 1.0.2u-ppc32/openssl10-x32-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+openssl10-x32: openssl10-x32 @VERSION@ (Secure Sockets Layer toolkit 1.0.x)
+openssl10-x32:
+openssl10-x32: The OpenSSL certificate management tool and the shared libraries
+openssl10-x32: that provide various encryption and decryption algorithms and
+openssl10-x32: protocols.
+openssl10-x32: This product includes software developed by the OpenSSL Project for
+openssl10-x32: use in the OpenSSL Toolkit (http://www.openssl.org). This product
+openssl10-x32: includes cryptographic software written by Eric Young
+openssl10-x32: (eay@cryptsoft.com). This product includes software written by Tim
+openssl10-x32: Hudson (tjh@cryptsoft.com).
+openssl10-x32:
Index: 1.0.2u-ppc32/openssl10-x32-pkg-install.sh
===================================================================
--- 1.0.2u-ppc32/openssl10-x32-pkg-install.sh (nonexistent)
+++ 1.0.2u-ppc32/openssl10-x32-pkg-install.sh (revision 5)
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: 1.0.2u-ppc32/openssl10-x32-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 1.0.2u-ppc32
===================================================================
--- 1.0.2u-ppc32 (nonexistent)
+++ 1.0.2u-ppc32 (revision 5)
Property changes on: 1.0.2u-ppc32
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 1.0.2u-x86_32/Makefile
===================================================================
--- 1.0.2u-x86_32/Makefile (nonexistent)
+++ 1.0.2u-x86_32/Makefile (revision 5)
@@ -0,0 +1,188 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC64)
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+NOT_PARALLEL = true
+
+CREATE_X86_32_PACKAGE = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/n/openssl10
+
+REQUIRES = net/openssl10/1.0.2u
+REQUIRES += libs/zlib/1.2.13-x86_32
+REQUIRES += libs/gmp/6.2.1-x86_32
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 1.0.2u
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/n/openssl10/openssl-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/openssl-$(version)
+src_dir_name = openssl-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = net
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+OPENSSL32_PKG_NAME = openssl10-x32
+OPENSSL32_PKG_VERSION = 1.0.2u
+OPENSSL32_PKG_ARCH = $(PKGARCH)
+OPENSSL32_PKG_DISTRO_NAME = $(DISTRO_NAME)
+OPENSSL32_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+OPENSSL32_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+OPENSSL32_PKG_SHORT_DESCRIPTION = Secure Sockets Layer toolkit 1.0.x
+OPENSSL32_PKG_URL = $(BUG_URL)
+OPENSSL32_PKG_LICENSE = GPLv2
+OPENSSL32_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(OPENSSL32_PKG_NAME)-pkg-description
+OPENSSL32_PKG_DESCRIPTION_FILE_IN = $(OPENSSL32_PKG_NAME)-pkg-description.in
+OPENSSL32_PKG_INSTALL_SCRIPT = $(OPENSSL32_PKG_NAME)-pkg-install.sh
+
+OPENSSL32_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(OPENSSL32_PKG_NAME)-package
+
+pkg_basename = $(OPENSSL32_PKG_NAME)-$(OPENSSL32_PKG_VERSION)-$(OPENSSL32_PKG_ARCH)-$(OPENSSL32_PKG_DISTRO_NAME)-$(OPENSSL32_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = INSTALL_PREFIX=$(OPENSSL32_PKG)
+
+
+extra_configure_switches = --libdir=lib$(MULTILIB_X86_32_SUFFIX)/openssl-1.0
+extra_configure_switches += --openssldir=/etc/ssl
+extra_configure_switches += no-mdc2
+extra_configure_switches += no-idea
+extra_configure_switches += no-rc5
+extra_configure_switches += no-sse2
+extra_configure_switches += no-ssl2
+extra_configure_switches += no-weak-ssl-ciphers
+extra_configure_switches += zlib-dynamic
+extra_configure_switches += shared
+
+openssl_environment = MACHINE=i686 SYSTEM=Linux
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @( cd $(SRC_DIR) ; \
+ find . -name "*.pod" -exec sed -i "s/^\=item \([0-9]\)\(\ \|\.\|$$\)/\=item C<\1>/g" {} \; \
+ )
+ @( cd $(SRC_DIR) ; \
+ sed -i "/linux-elf/s/fomit-frame-pointer/fomit-frame-pointer -march=i686 -mtune=i686/g" Configure ; \
+ )
+ @touch $@
+
+$(build_target): $(src_done)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(openssl_environment) ./config \
+ --prefix=/usr \
+ $(extra_configure_switches) \
+ $(ARCH_FLAGS) \
+ $(HW_FLAGS)
+ # ======= workaround for crypto/evp/... =======
+ @( cd $(SRC_DIR)/include/openssl ; \
+ ln -sf ../../crypto/idea/idea.h idea.h ; \
+ ln -sf ../../crypto/mdc2/mdc2.h mdc2.h ; \
+ ln -sf ../../crypto/rc5/rc5.h rc5.h ; \
+ )
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) -j1
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(OPENSSL32_PKG)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 MANDIR=/usr/share/man install $(env_sysroot)
+ifneq ($(__ENABLE_STATIC__),yes)
+ @rm -f $(OPENSSL32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX)/openssl-1.0/*.a
+endif
+ @mkdir -p $(OPENSSL32_PKG)/usr/bin/32
+ @( cd $(OPENSSL32_PKG)/usr/bin ; \
+ rm -f c_rehash ; \
+ mv openssl 32/openssl-1.0 ; \
+ )
+ @sed -e 's,/include$$,/include/openssl-1.0,' -i $(OPENSSL32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX)/openssl-1.0/pkgconfig/*.pc
+ @mkdir -p $(OPENSSL32_PKG)/lib$(MULTILIB_X86_32_SUFFIX)/openssl-1.0
+ @( cd $(OPENSSL32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX)/openssl-1.0 ; \
+ chmod +w lib*.so.?.?.? ; \
+ mv lib*.so.?.?.? ../../../lib$(MULTILIB_X86_32_SUFFIX)/openssl-1.0 ; \
+ ln -sf ../../../lib$(MULTILIB_X86_32_SUFFIX)/openssl-1.0/lib*.so.?.?.? . ; \
+ ln -sf libcrypto.so.?.?.? libcrypto.so.1 ; \
+ ln -sf libssl.so.?.?.? libssl.so.1 ; \
+ cp -a lib*.so.? ../../../lib$(MULTILIB_X86_32_SUFFIX)/openssl-1.0 ; \
+ )
+ @chmod +w $(OPENSSL32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX)/openssl-1.0/engines/*.so
+ @rm -rf $(OPENSSL32_PKG)/etc
+ @rm -rf $(OPENSSL32_PKG)/usr/include
+ @rm -rf $(OPENSSL32_PKG)/usr/share
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(OPENSSL32_PKG))
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_X86_32_SUFFIX)/openssl-1.0/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcrypto.pc libssl.pc openssl.pc \
+ )
+ # ======= Strip binaries =======
+ @( cd $(OPENSSL32_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(OPENSSL32_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ @touch $@
+
+$(OPENSSL32_PKG_DESCRIPTION_FILE): $(OPENSSL32_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(OPENSSL32_PKG_DESCRIPTION_FILE) $(OPENSSL32_PKG_INSTALL_SCRIPT)
+ @cp $(OPENSSL32_PKG_DESCRIPTION_FILE) $(OPENSSL32_PKG)/.DESCRIPTION
+ @cp $(OPENSSL32_PKG_INSTALL_SCRIPT) $(OPENSSL32_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(OPENSSL32_PKG)/.REQUIRES
+ @echo "pkgname=$(OPENSSL32_PKG_NAME)" > $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "pkgver=$(OPENSSL32_PKG_VERSION)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "arch=$(OPENSSL32_PKG_ARCH)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "distroname=$(OPENSSL32_PKG_DISTRO_NAME)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "distrover=$(OPENSSL32_PKG_DISTRO_VERSION)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "group=$(OPENSSL32_PKG_GROUP)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(OPENSSL32_PKG_SHORT_DESCRIPTION)\"" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "url=$(OPENSSL32_PKG_URL)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "license=$(OPENSSL32_PKG_LICENSE)" >> $(OPENSSL32_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(OPENSSL32_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 1.0.2u-x86_32/PATCHES
===================================================================
--- 1.0.2u-x86_32/PATCHES (nonexistent)
+++ 1.0.2u-x86_32/PATCHES (revision 5)
@@ -0,0 +1,3 @@
+
+../../../sources/packages/n/openssl10/patches/openssl-1.0.2u-versioned-symbols.patch -p0
+../../../sources/packages/n/openssl10/patches/openssl-1.0.2u-shlib.patch -p0
Index: 1.0.2u-x86_32/openssl10-x32-pkg-description.in
===================================================================
--- 1.0.2u-x86_32/openssl10-x32-pkg-description.in (nonexistent)
+++ 1.0.2u-x86_32/openssl10-x32-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+openssl10-x32: openssl10-x32 @VERSION@ (Secure Sockets Layer toolkit 1.0.x)
+openssl10-x32:
+openssl10-x32: The OpenSSL certificate management tool and the shared libraries
+openssl10-x32: that provide various encryption and decryption algorithms and
+openssl10-x32: protocols.
+openssl10-x32: This product includes software developed by the OpenSSL Project for
+openssl10-x32: use in the OpenSSL Toolkit (http://www.openssl.org). This product
+openssl10-x32: includes cryptographic software written by Eric Young
+openssl10-x32: (eay@cryptsoft.com). This product includes software written by Tim
+openssl10-x32: Hudson (tjh@cryptsoft.com).
+openssl10-x32:
Index: 1.0.2u-x86_32/openssl10-x32-pkg-install.sh
===================================================================
--- 1.0.2u-x86_32/openssl10-x32-pkg-install.sh (nonexistent)
+++ 1.0.2u-x86_32/openssl10-x32-pkg-install.sh (revision 5)
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: 1.0.2u-x86_32/openssl10-x32-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 1.0.2u-x86_32
===================================================================
--- 1.0.2u-x86_32 (nonexistent)
+++ 1.0.2u-x86_32 (revision 5)
Property changes on: 1.0.2u-x86_32
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: .
===================================================================
--- . (nonexistent)
+++ . (revision 5)
Property changes on: .
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
383 Commits
1 Branch
1 Tag