Index: 5.9/Makefile
===================================================================
--- 5.9/Makefile (nonexistent)
+++ 5.9/Makefile (revision 5)
@@ -0,0 +1,485 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/n/net-snmp
+
+REQUIRES = net/libnl3/3.5.0
+REQUIRES += net/openssl/1.1.1r
+REQUIRES += net/tcp_wrappers/7.6
+REQUIRES += app/lm-sensors/3.6.0
+REQUIRES += app/pciutils/3.7.0
+REQUIRES += dev/python3-modules/pip/22.2.2
+REQUIRES += dev/perl/5.36.0
+REQUIRES += dev/perl-modules/perl-b-c/1.57
+REQUIRES += libs/pcre/8.44
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 5.9
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/n/net-snmp/net-snmp-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/net-snmp-$(version)
+src_dir_name = net-snmp-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+snmpd_conf = $(CURDIR)/etc/snmp/snmpd.conf
+rc_snmpd = $(CURDIR)/etc/rc.d/rc.snmpd
+
+
+####### Targets
+
+PKG_GROUP = net
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+NSNMP_PKG_NAME = net-snmp
+NSNMP_PKG_VERSION = 5.9
+NSNMP_PKG_ARCH = $(PKGARCH)
+NSNMP_PKG_DISTRO_NAME = $(DISTRO_NAME)
+NSNMP_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+NSNMP_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+NSNMP_PKG_SHORT_DESCRIPTION = Simple Network Management Protocol tools
+NSNMP_PKG_URL = $(BUG_URL)
+NSNMP_PKG_LICENSE = custom
+NSNMP_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(NSNMP_PKG_NAME)-pkg-description
+NSNMP_PKG_DESCRIPTION_FILE_IN = $(NSNMP_PKG_NAME)-pkg-description.in
+NSNMP_PKG_INSTALL_SCRIPT = $(NSNMP_PKG_NAME)-pkg-install.sh
+
+NSNMP_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(NSNMP_PKG_NAME)-package
+
+pkg_basename = $(NSNMP_PKG_NAME)-$(NSNMP_PKG_VERSION)-$(NSNMP_PKG_ARCH)-$(NSNMP_PKG_DISTRO_NAME)-$(NSNMP_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(NSNMP_PKG)
+
+
+PYTHON_VERSION = 3.10
+
+python_environment = PYTHON=$(PYTHON3)
+python_environment += PYTHON_CC='$(CC) --sysroot=$(TARGET_DEST_DIR) -pthread'
+python_environment += EXTRA_PYTHON_CFLAGS='$(shell $(TARGET_DEST_DIR)/usr/bin/python$(PYTHON_VERSION)-config --cflags)'
+python_environment += EXTRA_PYTHON_LDFLAGS='$(shell $(TARGET_DEST_DIR)/usr/bin/python$(PYTHON_VERSION)-config --ldflags)'
+#
+# Disable PYTHONPATH for X86_64 because setup.py assumes that is not cross compilation process:
+#
+ifeq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_X86_64_GLIBC)),)
+python_environment += PYTHON_PATH='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/python$(PYTHON_VERSION)/site-packages:$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/python$(PYTHON_VERSION)/lib-dynload'
+endif
+python_environment += PYTHON_LDSHARED='$(CC) --sysroot=$(TARGET_DEST_DIR) -pthread -shared -L$(TARGET_DEST_DIR)/lib$(LIBSUFFIX) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)'
+python_environment += PYTHON_CCSHARED='$(CC) --sysroot=$(TARGET_DEST_DIR) -pthread -shared -L$(TARGET_DEST_DIR)/lib$(LIBSUFFIX) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)'
+
+
+#
+# Common Perl5 Environment:
+# ========================
+#
+perl_args = INSTALLDIRS=vendor
+
+perl_args += PERL_LIB='$(TARGET_DEST_DIR)/usr/share/perl5'
+perl_args += PERL_ARCHLIB='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5'
+perl_args += PERL_INC='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_args += PERL_INCDEP='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+
+perl_args += SITELIBEXP='/usr/share/perl5/site_perl'
+perl_args += SITEARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+perl_args += VENDORLIBEXP='/usr/share/perl5/vendor_perl'
+perl_args += VENDORARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_args += PERLPREFIX='/usr'
+perl_args += INSTALLPRIVLIB='/usr/share/perl5'
+perl_args += INSTALLARCHLIB='/usr/lib$(LIBSUFFIX)/perl5'
+
+perl_args += SITEPREFIX='/usr'
+perl_args += INSTALLSITELIB='/usr/share/perl5/site_perl'
+perl_args += INSTALLSITEARCH='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+
+perl_args += VENDORPREFIX='/usr'
+perl_args += INSTALLVENDORLIB='/usr/share/perl5/vendor_perl'
+perl_args += INSTALLVENDORARCH='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_args += INSTALLBIN='/usr/bin'
+perl_args += INSTALLSITEBIN='/usr/bin'
+perl_args += INSTALLVENDORBIN='/usr/bin'
+
+perl_args += INSTALLSCRIPT='/usr/bin'
+perl_args += INSTALLSITESCRIPT='/usr/bin'
+perl_args += INSTALLVENDORSCRIPT='/usr/bin'
+
+perl_args += INSTALLMAN1DIR='/usr/share/man/man1'
+perl_args += INSTALLSITEMAN1DIR='/usr/share/man/man1'
+perl_args += INSTALLVENDORMAN1DIR='/usr/share/man/man1'
+
+perl_args += INSTALLMAN3DIR='/usr/share/man/man3'
+perl_args += INSTALLSITEMAN3DIR='/usr/share/man/man3'
+perl_args += INSTALLVENDORMAN3DIR='/usr/share/man/man3'
+
+#
+# HW Specific Perl5 Environment:
+# =============================
+#
+perl_args += AR=$(AR)
+perl_args += RANLIB=$(RANLIB)
+perl_args += CC='$(CC) --sysroot=$(TARGET_DEST_DIR) $(ARCH_OPTIMIZATION) $(ARCH_FLAGS) $(ARCH_DEFS)'
+perl_args += LD='$(CC) --sysroot=$(TARGET_DEST_DIR)'
+perl_args += LDFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_args += CCFLAGS='$(CFLAGS) -I$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_args += LDDLFLAGS=-L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE
+perl_args += CCCDLFLAGS='-fPIC'
+perl_args += CCDLFLAGS='-Wl,-E -Wl,-rpath,/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_args += FULL_AR=$(AR)
+perl_args += OSNAME=linux
+perl_args += LIBC=
+perl_args += OSVERS=
+
+perl_environment += PERLCC='$(CC) --sysroot=$(TARGET_DEST_DIR) $(ARCH_OPTIMIZATION) $(ARCH_FLAGS) $(ARCH_DEFS)'
+
+
+extra_configure_switches = --libdir=/usr/lib$(LIBSUFFIX)
+extra_configure_switches += --docdir=/usr/share/doc/$(src_dir_name)
+extra_configure_switches += --mandir=/usr/share/man
+extra_configure_switches += --sysconfdir=/etc/snmp
+extra_configure_switches += --enable-ipv6
+extra_configure_switches += --disable-debugging
+extra_configure_switches += --enable-static=no
+extra_configure_switches += --with-libwrap
+extra_configure_switches += --with-default-snmp-version=3
+extra_configure_switches += --with-sys-contact="root@example.org"
+extra_configure_switches += --with-sys-location="unknown"
+extra_configure_switches += --with-logfile="/var/log/snmpd.log"
+extra_configure_switches += --with-persistent-directory="/var/lib/net-snmp"
+extra_configure_switches += --without-rpm
+extra_configure_switches += --with-mib-modules="ucd-snmp/lmsensorsMib"
+
+extra_configure_switches += --with-perl-modules="$(perl_args)"
+extra_configure_switches += --disable-perl-cc-checks
+
+extra_configure_switches += --with-python-modules
+
+extra_configure_switches += --program-suffix=
+extra_configure_switches += --program-prefix=
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+CFLAGS += -DNETSNMP_REMOVE_U64 -I$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE
+LDFLAGS += -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE
+
+
+TARGET_BIN_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+TARGET_DSO_RPATH = /usr/lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)/perl5/CORE
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @cp -a $(CONFIG_GUESS) $(CONFIG_SUB) $(SRC_DIR)
+ @touch $@
+
+$(build_target): $(src_done)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(perl_environment) $(python_environment) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET) \
+ $(extra_configure_switches)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(perl_environment) $(python_environment) $(MAKE) -j1
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(NSNMP_PKG)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(perl_environment) $(python_environment) $(MAKE) -j1 install $(env_sysroot)
+ @mkdir -p $(NSNMP_PKG)/etc/snmp
+ @cat $(snmpd_conf) > $(NSNMP_PKG)/etc/snmp/snmpd.conf.new
+ @mkdir -p $(NSNMP_PKG)/etc/rc.d
+ @cat $(rc_snmpd) > $(NSNMP_PKG)/etc/rc.d/rc.snmpd.new
+ @mkdir -p $(NSNMP_PKG)/var/lib/net-snmp/{cert,mib}_indexes
+ # ======= Remove perllocal files: =======
+ @( cd $(NSNMP_PKG) ; find . -name perllocal.pod -exec rm "{}" \+ )
+ # ======= Remove DESTDIR from the packlist filenames =======
+ @find $(NSNMP_PKG) -name .packlist | while read plist ; do \
+ sed -e "s,$(NSNMP_PKG),,g" $${plist} > $${plist}.new ; \
+ mv -f $${plist}.new $${plist} ; \
+ done
+ # ======= chmod 644 of pkg-config *.pc files =======
+ @chmod 644 $(NSNMP_PKG)/usr/lib$(LIBSUFFIX)/pkgconfig/*.pc
+ # ======= Remove first of two occurrence of interpreter lines =======
+ @( cd $(NSNMP_PKG)/usr/bin ; \
+ for file in mib2c tkmib ; do \
+ cnt=`grep -n '^#!' $${file} | wc -l` ; \
+ if [ $${cnt} -gt 1 ] ; then \
+ sed -i '0,/^#!/d' $${file} ; \
+ fi ; \
+ done ; \
+ )
+ # ======= Install Documentation =======
+ @( cd $(NSNMP_PKG)/usr/share/man/man1 ; \
+ for file in *.1 ; do \
+ ln=`head -n 1 $$file` ; \
+ if [ "`echo $$ln | grep '^\.so '`" != "" ] ; then \
+ origin=`echo $$ln | cut -f 2 -d ' '` ; \
+ origin=`basename $$origin` ; \
+ rm -f $$file ; \
+ ln -sf $$origin $$file ; \
+ fi ; \
+ done ; \
+ )
+ @( cd $(NSNMP_PKG)/usr/share/man/man3 ; \
+ for file in *.3 ; do \
+ ln=`head -n 1 $$file` ; \
+ if [ "`echo $$ln | grep '^\.so '`" != "" ] ; then \
+ origin=`echo $$ln | cut -f 2 -d ' '` ; \
+ origin=`basename $$origin` ; \
+ rm -f $$file ; \
+ ln -sf $$origin $$file ; \
+ fi ; \
+ done ; \
+ )
+ @if [ -d $(NSNMP_PKG)/usr/share/man ]; then \
+ ( cd $(NSNMP_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(NSNMP_PKG)/usr/doc/$(src_dir_name)
+ @cp -a $(SRC_DIR)/COPYING \
+ $(NSNMP_PKG)/usr/doc/$(src_dir_name)
+ @mkdir -p $(NSNMP_PKG)/usr/share/doc/$(src_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a AGENT.txt COPYING CodingStyle EXAMPLE.conf.def \
+ FAQ INSTALL NEWS PORTING README* TODO doc/rfc \
+ $(NSNMP_PKG)/usr/share/doc/$(src_dir_name) ; \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r ChangeLog ]; then \
+ DOCSDIR=`echo $(NSNMP_PKG)/usr/share/doc/$(src_dir_name)` ; \
+ cat ChangeLog | head -n 1000 > $$DOCSDIR/ChangeLog ; \
+ touch -r ChangeLog $$DOCSDIR/ChangeLog ; \
+ fi \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r CHANGES ]; then \
+ DOCSDIR=`echo $(NSNMP_PKG)/usr/share/doc/$(src_dir_name)` ; \
+ cat CHANGES | head -n 1000 > $$DOCSDIR/CHANGES ; \
+ touch -r CHANGES $$DOCSDIR/CHANGES ; \
+ fi \
+ )
+ # ======= remove toolchain path from target libtool *.la files =======
+ @( cd $(NSNMP_PKG)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libnetsnmp.la libnetsnmpagent.la \
+ libnetsnmphelpers.la libnetsnmpmibs.la \
+ libnetsnmptrapd.la ; \
+ sed -i "s, -L$(BUILDSYSTEM)[^ ]*,,g" libnetsnmp.la libnetsnmpagent.la \
+ libnetsnmphelpers.la libnetsnmpmibs.la \
+ libnetsnmptrapd.la ; \
+ )
+ # ======= remove toolchain path from target pkg-config *.pc files =======
+ @( cd $(NSNMP_PKG)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" netsnmp-agent.pc netsnmp.pc ; \
+ sed -i "s,$(BUILDSYSTEM),,g" netsnmp-agent.pc netsnmp.pc ; \
+ )
+ # ======= remove toolchain path from target config scripts =======
+ @( cd $(NSNMP_PKG)/usr/bin ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" net-snmp-config net-snmp-create-v3-user ; \
+ sed -i "s,$(BUILDSYSTEM),,g" net-snmp-config net-snmp-create-v3-user ; \
+ )
+ # ======= also remove OPTIMIZATION to not create problems to other people =======
+ @( cd $(NSNMP_PKG)/usr/bin ; \
+ sed -i "s, -O[sg],,g" net-snmp-config ; \
+ sed -i "s, -O[ ], ,g" net-snmp-config ; \
+ sed -i "s, -Ofast,,g" net-snmp-config ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(NSNMP_PKG))
+ # ======= Remove BS path from target scripts =======
+ @( cd $(NSNMP_PKG)/usr/bin ; \
+ sed -i 's,$(BUILDSYSTEM),,g' checkbandwidth fixproc ipf-mod.pl mib2c net-snmp-cert \
+ snmp-bridge-mib snmpcheck snmpconf tkmib traptoemail ; \
+ )
+ # ======= tune 'net-snmp-config' script for target rootfs =======
+ @( cd $(NSNMP_PKG)/usr/bin ; \
+ sed -i "s,$(BUILD),$(TARGET),g" net-snmp-config ; \
+ sed -i "s,$(CCACHE)$(CROSS_PREFIX),,g" net-snmp-config ; \
+ sed -i "s,$(CROSS_PREFIX),,g" net-snmp-config ; \
+ sed -i "s, --sysroot=,,g" net-snmp-config ; \
+ )
+ # ======= tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libnetsnmp.la libnetsnmpagent.la \
+ libnetsnmphelpers.la libnetsnmpmibs.la \
+ libnetsnmptrapd.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libnetsnmp.la libnetsnmpagent.la \
+ libnetsnmphelpers.la libnetsnmpmibs.la \
+ libnetsnmptrapd.la ; \
+ )
+ # ======= tune 'net-snmp-config' script for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/bin ; \
+ sed -i "s,^prefix=/usr,prefix=$(TARGET_DEST_DIR)/usr,g" net-snmp-config ; \
+ sed -i "s,^libdir=/usr,libdir=$(TARGET_DEST_DIR)/usr,g" net-snmp-config ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" net-snmp-config ; \
+ sed -i "s,L/usr,L$(TARGET_DEST_DIR)/usr,g" net-snmp-config ; \
+ sed -i "s,I/usr,I$(TARGET_DEST_DIR)/usr,g" net-snmp-config ; \
+ sed -i "s,--sysroot=,--sysroot=$(TARGET_DEST_DIR),g" net-snmp-config ; \
+ sed -i "s,PKG_CONFIG_PATH=[^']*,PKG_CONFIG_PATH=$(PKG_CONFIG_PATH),g" net-snmp-config ; \
+ sed -i "s,PKG_CONFIG_LIBDIR=[^']*,PKG_CONFIG_LIBDIR=$(PKG_CONFIG_LIBDIR),g" net-snmp-config ; \
+ )
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,=/usr,=$(TARGET_DEST_DIR)/usr,g" netsnmp-agent.pc netsnmp.pc ; \
+ sed -i "s,L/usr,L$(TARGET_DEST_DIR)/usr,g" netsnmp-agent.pc netsnmp.pc ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" netsnmp-agent.pc netsnmp.pc ; \
+ )
+ # ======= chmod 755 of Perl5 shared objects =======
+ @( cd $(NSNMP_PKG)/usr/lib$(LIBSUFFIX)/perl5 ; find . -name "*.so" -exec chmod 755 "{}" \+ )
+ # ======= Strip binaries =======
+ @( cd $(NSNMP_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(NSNMP_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target binaries =======
+ @( cd $(NSNMP_PKG)/usr ; \
+ for file in `find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_BIN_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(NSNMP_PKG)/usr/lib$(LIBSUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+ # ======= Set RPATH/RUNPATH for target Perl5 shared objects =======
+ @( cd $(NSNMP_PKG)/usr/lib$(LIBSUFFIX)/perl5 ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(BUILDSYSTEM)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_DSO_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(NSNMP_PKG_DESCRIPTION_FILE): $(NSNMP_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(NSNMP_PKG_DESCRIPTION_FILE) $(NSNMP_PKG_INSTALL_SCRIPT)
+ @cp $(NSNMP_PKG_DESCRIPTION_FILE) $(NSNMP_PKG)/.DESCRIPTION
+ @cp $(NSNMP_PKG_INSTALL_SCRIPT) $(NSNMP_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(NSNMP_PKG)/.REQUIRES
+ @echo "pkgname=$(NSNMP_PKG_NAME)" > $(NSNMP_PKG)/.PKGINFO ; \
+ echo "pkgver=$(NSNMP_PKG_VERSION)" >> $(NSNMP_PKG)/.PKGINFO ; \
+ echo "arch=$(NSNMP_PKG_ARCH)" >> $(NSNMP_PKG)/.PKGINFO ; \
+ echo "distroname=$(NSNMP_PKG_DISTRO_NAME)" >> $(NSNMP_PKG)/.PKGINFO ; \
+ echo "distrover=$(NSNMP_PKG_DISTRO_VERSION)" >> $(NSNMP_PKG)/.PKGINFO ; \
+ echo "group=$(NSNMP_PKG_GROUP)" >> $(NSNMP_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(NSNMP_PKG_SHORT_DESCRIPTION)\"" >> $(NSNMP_PKG)/.PKGINFO ; \
+ echo "url=$(NSNMP_PKG_URL)" >> $(NSNMP_PKG)/.PKGINFO ; \
+ echo "license=$(NSNMP_PKG_LICENSE)" >> $(NSNMP_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(NSNMP_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 5.9/PATCHES
===================================================================
--- 5.9/PATCHES (nonexistent)
+++ 5.9/PATCHES (revision 5)
@@ -0,0 +1,6 @@
+
+../../../sources/packages/n/net-snmp/patches/net-snmp-5.9-cert-path.patch -p0
+../../../sources/packages/n/net-snmp/patches/net-snmp-5.9-cross-python.patch -p0
+../../../sources/packages/n/net-snmp/patches/net-snmp-5.9-iterator.patch -p0
+../../../sources/packages/n/net-snmp/patches/net-snmp-5.9-modern-rpm-api.patch -p0
+../../../sources/packages/n/net-snmp/patches/net-snmp-5.9-snmp-config.patch -p0
Index: 5.9/etc/rc.d/rc.snmpd
===================================================================
--- 5.9/etc/rc.d/rc.snmpd (nonexistent)
+++ 5.9/etc/rc.d/rc.snmpd (revision 5)
@@ -0,0 +1,54 @@
+#!/bin/sh
+#
+# rc.snmpd This shell script takes care of starting and stopping
+# the net-snmp SNMP daemon
+
+OPTIONS="-A -p /var/run/snmpd -a"
+
+start() {
+ if [ -x /usr/sbin/snmpd -a -f /etc/snmp/snmpd.conf ]; then
+ echo -n "Starting snmpd: "
+ /usr/sbin/snmpd $OPTIONS -c /etc/snmp/snmpd.conf
+ echo " /usr/sbin/snmpd $OPTIONS -c /etc/snmp/snmpd.conf"
+ fi
+}
+
+stop() {
+ # Stop daemons.
+ COUNT=0
+ echo -n "Shutting down snmpd: "
+ while `killall snmpd 2>/dev/null`; do
+ echo -n "."
+ sleep 1
+ COUNT=$((COUNT+1))
+ if [ $COUNT -ge 30 ]; then
+ killall -9 snmpd
+ sleep 1
+ break
+ fi
+ done
+ echo " DONE"
+}
+
+# See how we were called.
+case "$1" in
+ start)
+ start
+ ;;
+ stop)
+ stop
+ ;;
+ restart|reload)
+ stop
+ start
+ ;;
+ condrestart)
+ if [ -f /var/run/snmpd ]; then
+ stop
+ start
+ fi
+ ;;
+ *)
+ echo $"Usage: $0 {start|stop|restart|condrestart}"
+ ;;
+esac
Index: 5.9/etc/rc.d
===================================================================
--- 5.9/etc/rc.d (nonexistent)
+++ 5.9/etc/rc.d (revision 5)
Property changes on: 5.9/etc/rc.d
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 5.9/etc/snmp/snmpd.conf
===================================================================
--- 5.9/etc/snmp/snmpd.conf (nonexistent)
+++ 5.9/etc/snmp/snmpd.conf (revision 5)
@@ -0,0 +1,455 @@
+###############################################################################
+#
+# snmpd.conf:
+# An example configuration file for configuring the ucd-snmp snmpd agent.
+#
+###############################################################################
+#
+# This file is intended to only be as a starting point. Many more
+# configuration directives exist than are mentioned in this file. For
+# full details, see the snmpd.conf(5) manual page.
+#
+# All lines beginning with a '#' are comments and are intended for you
+# to read. All other lines are configuration commands for the agent.
+
+###############################################################################
+# Access Control
+###############################################################################
+
+# As shipped, the snmpd demon will only respond to queries on the
+# system mib group until this file is replaced or modified for
+# security purposes. Examples are shown below about how to increase the
+# level of access.
+
+# By far, the most common question I get about the agent is "why won't
+# it work?", when really it should be "how do I configure the agent to
+# allow me to access it?"
+#
+# By default, the agent responds to the "public" community for read
+# only access, if run out of the box without any configuration file in
+# place. The following examples show you other ways of configuring
+# the agent so that you can change the community names, and give
+# yourself write access to the mib tree as well.
+#
+# For more information, read the FAQ as well as the snmpd.conf(5)
+# manual page.
+
+####
+# First, map the community name "public" into a "security name"
+
+# sec.name source community
+com2sec notConfigUser default public
+
+####
+# Second, map the security name into a group name:
+
+# groupName securityModel securityName
+group notConfigGroup v1 notConfigUser
+group notConfigGroup v2c notConfigUser
+
+####
+# Third, create a view for us to let the group have rights to:
+
+# Make at least snmpwalk -v 1 localhost -c public system fast again.
+# name incl/excl subtree mask(optional)
+view systemview included .1.3.6.1.2.1.1
+view systemview included .1.3.6.1.2.1.25.1.1
+
+####
+# Finally, grant the group read-only access to the systemview view.
+
+# group context sec.model sec.level prefix read write notif
+access notConfigGroup "" any noauth exact systemview none none
+
+# -----------------------------------------------------------------------------
+
+# Here is a commented out example configuration that allows less
+# restrictive access.
+
+# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY
+# KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO
+# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE.
+
+## sec.name source community
+#com2sec local localhost COMMUNITY
+#com2sec mynetwork NETWORK/24 COMMUNITY
+
+## group.name sec.model sec.name
+#group MyRWGroup any local
+#group MyROGroup any mynetwork
+#
+#group MyRWGroup any otherv3user
+#...
+
+## incl/excl subtree mask
+#view all included .1 80
+
+## -or just the mib2 tree-
+
+#view mib2 included .iso.org.dod.internet.mgmt.mib-2 fc
+
+
+## context sec.model sec.level prefix read write notif
+#access MyROGroup "" any noauth 0 all none none
+#access MyRWGroup "" any noauth 0 all all all
+
+
+###############################################################################
+# Sample configuration to make net-snmpd RFC 1213.
+# Unfortunately v1 and v2c don't allow any user based authentification, so
+# opening up the default config is not an option from a security point.
+#
+# WARNING: If you uncomment the following lines you allow write access to your
+# snmpd daemon from any source! To avoid this use different names for your
+# community or split out the write access to a different community and
+# restrict it to your local network.
+# Also remember to comment the syslocation and syscontact parameters later as
+# otherwise they are still read only (see FAQ for net-snmp).
+#
+
+# First, map the community name "public" into a "security name"
+# sec.name source community
+#com2sec notConfigUser default public
+
+# Second, map the security name into a group name:
+# groupName securityModel securityName
+#group notConfigGroup v1 notConfigUser
+#group notConfigGroup v2c notConfigUser
+
+# Third, create a view for us to let the group have rights to:
+# Open up the whole tree for ro, make the RFC 1213 required ones rw.
+# name incl/excl subtree mask(optional)
+#view roview included .1
+#view rwview included system.sysContact
+#view rwview included system.sysName
+#view rwview included system.sysLocation
+#view rwview included interfaces.ifTable.ifEntry.ifAdminStatus
+#view rwview included at.atTable.atEntry.atPhysAddress
+#view rwview included at.atTable.atEntry.atNetAddress
+#view rwview included ip.ipForwarding
+#view rwview included ip.ipDefaultTTL
+#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteDest
+#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteIfIndex
+#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric1
+#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric2
+#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric3
+#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric4
+#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteType
+#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteAge
+#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMask
+#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric5
+#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaIfIndex
+#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaPhysAddress
+#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaNetAddress
+#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaType
+#view rwview included tcp.tcpConnTable.tcpConnEntry.tcpConnState
+#view rwview included egp.egpNeighTable.egpNeighEntry.egpNeighEventTrigger
+#view rwview included snmp.snmpEnableAuthenTraps
+
+# Finally, grant the group read-only access to the systemview view.
+# group context sec.model sec.level prefix read write notif
+#access notConfigGroup "" any noauth exact roview rwview none
+
+
+
+###############################################################################
+# System contact information
+#
+
+# It is also possible to set the sysContact and sysLocation system
+# variables through the snmpd.conf file:
+
+syslocation Unknown (edit /etc/snmp/snmpd.conf)
+syscontact Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
+
+# Example output of snmpwalk:
+# % snmpwalk -v 1 localhost -c public system
+# system.sysDescr.0 = "SunOS name sun4c"
+# system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4
+# system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55
+# system.sysContact.0 = "Me <me@somewhere.org>"
+# system.sysName.0 = "name"
+# system.sysLocation.0 = "Right here, right now."
+# system.sysServices.0 = 72
+
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Process checks.
+#
+# The following are examples of how to use the agent to check for
+# processes running on the host. The syntax looks something like:
+#
+# proc NAME [MAX=0] [MIN=0]
+#
+# NAME: the name of the process to check for. It must match
+# exactly (ie, http will not find httpd processes).
+# MAX: the maximum number allowed to be running. Defaults to 0.
+# MIN: the minimum number to be running. Defaults to 0.
+
+#
+# Examples (commented out by default):
+#
+
+# Make sure mountd is running
+#proc mountd
+
+# Make sure there are no more than 4 ntalkds running, but 0 is ok too.
+#proc ntalkd 4
+
+# Make sure at least one sendmail, but less than or equal to 10 are running.
+#proc sendmail 10 1
+
+# A snmpwalk of the process mib tree would look something like this:
+#
+# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.2
+# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1
+# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2
+# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3
+# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd"
+# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd"
+# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail"
+# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1
+# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4
+# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10
+# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1
+# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1
+# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running."
+# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = ""
+# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = ""
+# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0
+#
+# Note that the errorFlag for mountd is set to 1 because one is not
+# running (in this case an rpc.mountd is, but thats not good enough),
+# and the ErrMessage tells you what's wrong. The configuration
+# imposed in the snmpd.conf file is also shown.
+#
+# Special Case: When the min and max numbers are both 0, it assumes
+# you want a max of infinity and a min of 1.
+#
+
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Executables/scripts
+#
+
+#
+# You can also have programs run by the agent that return a single
+# line of output and an exit code. Here are two examples.
+#
+# exec NAME PROGRAM [ARGS ...]
+#
+# NAME: A generic name.
+# PROGRAM: The program to run. Include the path!
+# ARGS: optional arguments to be passed to the program
+
+# a simple hello world
+
+#exec echotest /bin/echo hello world
+
+# Run a shell script containing:
+#
+# #!/bin/sh
+# echo hello world
+# echo hi there
+# exit 35
+#
+# Note: this has been specifically commented out to prevent
+# accidental security holes due to someone else on your system writing
+# a /tmp/shtest before you do. Uncomment to use it.
+#
+#exec shelltest /bin/sh /tmp/shtest
+
+# Then,
+# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.8
+# enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1
+# enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2
+# enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest"
+# enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest"
+# enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world"
+# enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest"
+# enterprises.ucdavis.extTable.extEntry.extResult.1 = 0
+# enterprises.ucdavis.extTable.extEntry.extResult.2 = 35
+# enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world."
+# enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world."
+# enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0
+# enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0
+
+# Note that the second line of the /tmp/shtest shell script is cut
+# off. Also note that the exit status of 35 was returned.
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# disk checks
+#
+
+# The agent can check the amount of available disk space, and make
+# sure it is above a set limit.
+
+# disk PATH [MIN=100000]
+#
+# PATH: mount path to the disk in question.
+# MIN: Disks with space below this value will have the Mib's errorFlag set.
+# Default value = 100000.
+
+# Check the / partition and make sure it contains at least 10 megs.
+
+#disk / 10000
+
+# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.9
+# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0
+# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F
+# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0"
+# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000
+# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130
+# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325
+# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092
+# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58
+# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0
+# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = ""
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# load average checks
+#
+
+# load [1MAX=12.0] [5MAX=12.0] [15MAX=12.0]
+#
+# 1MAX: If the 1 minute load average is above this limit at query
+# time, the errorFlag will be set.
+# 5MAX: Similar, but for 5 min average.
+# 15MAX: Similar, but for 15 min average.
+
+# Check for loads:
+#load 12 14 14
+
+# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.10
+# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1
+# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2
+# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3
+# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1"
+# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5"
+# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15"
+# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39
+# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31
+# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36
+# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00"
+# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00"
+# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00"
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = ""
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = ""
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = ""
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Extensible sections.
+#
+
+# This alleviates the multiple line output problem found in the
+# previous executable mib by placing each mib in its own mib table:
+
+# Run a shell script containing:
+#
+# #!/bin/sh
+# echo hello world
+# echo hi there
+# exit 35
+#
+# Note: this has been specifically commented out to prevent
+# accidental security holes due to someone else on your system writing
+# a /tmp/shtest before you do. Uncomment to use it.
+#
+# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest
+
+# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.50
+# enterprises.ucdavis.50.1.1 = 1
+# enterprises.ucdavis.50.2.1 = "shelltest"
+# enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest"
+# enterprises.ucdavis.50.100.1 = 35
+# enterprises.ucdavis.50.101.1 = "hello world."
+# enterprises.ucdavis.50.101.2 = "hi there."
+# enterprises.ucdavis.50.102.1 = 0
+
+# Now the Output has grown to two lines, and we can see the 'hi
+# there.' output as the second line from our shell script.
+#
+# Note that you must alter the mib.txt file to be correct if you want
+# the .50.* outputs above to change to reasonable text descriptions.
+
+# Other ideas:
+#
+# exec .1.3.6.1.4.1.2021.51 ps /bin/ps
+# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top
+# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Pass through control.
+#
+
+# Usage:
+# pass MIBOID EXEC-COMMAND
+#
+# This will pass total control of the mib underneath the MIBOID
+# portion of the mib to the EXEC-COMMAND.
+#
+# Note: You'll have to change the path of the passtest script to your
+# source directory or install it in the given location.
+#
+# Example: (see the script for details)
+# (commented out here since it requires that you place the
+# script in the right location. (its not installed by default))
+
+# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/local/passtest
+
+# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.255
+# enterprises.ucdavis.255.1 = "life the universe and everything"
+# enterprises.ucdavis.255.2.1 = 42
+# enterprises.ucdavis.255.2.2 = OID: 42.42.42
+# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42
+# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1
+# enterprises.ucdavis.255.5 = 42
+# enterprises.ucdavis.255.6 = Gauge: 42
+#
+# % snmpget -v 1 localhost public .1.3.6.1.4.1.2021.255.5
+# enterprises.ucdavis.255.5 = 42
+#
+# % snmpset -v 1 localhost public .1.3.6.1.4.1.2021.255.1 s "New string"
+# enterprises.ucdavis.255.1 = "New string"
+#
+
+# For specific usage information, see the man/snmpd.conf.5 manual page
+# as well as the local/passtest script used in the above example.
+
+# Added for support of bcm5820 cards.
+pass .1.3.6.1.4.1.4413.4.1 /usr/bin/ucd5820stat
+
+###############################################################################
+# Further Information
+#
+# See the snmpd.conf manual page, and the output of "snmpd -H".
Index: 5.9/etc/snmp
===================================================================
--- 5.9/etc/snmp (nonexistent)
+++ 5.9/etc/snmp (revision 5)
Property changes on: 5.9/etc/snmp
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 5.9/etc
===================================================================
--- 5.9/etc (nonexistent)
+++ 5.9/etc (revision 5)
Property changes on: 5.9/etc
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 5.9/net-snmp-pkg-description.in
===================================================================
--- 5.9/net-snmp-pkg-description.in (nonexistent)
+++ 5.9/net-snmp-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+net-snmp: net-snmp @VERSION@ (Simple Network Management Protocol tools)
+net-snmp:
+net-snmp: Various tools relating to the Simple Network Management Protocol:
+net-snmp:
+net-snmp: - An extensible agent
+net-snmp: - An SNMP library
+net-snmp: - Tools to request or set information from SNMP agents
+net-snmp: - Tools to generate and handle SNMP traps
+net-snmp: - A version of the UNIX 'netstat' command using SNMP
+net-snmp: - A graphical Perl/Tk/SNMP based mib browser
+net-snmp:
Index: 5.9/net-snmp-pkg-install.sh
===================================================================
--- 5.9/net-snmp-pkg-install.sh (nonexistent)
+++ 5.9/net-snmp-pkg-install.sh (revision 5)
@@ -0,0 +1,61 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ # Keep same perms on rc.snmpd.new:
+ if [ -e etc/rc.d/rc.snmpd ]; then
+ cp -a etc/rc.d/rc.snmpd etc/rc.d/rc.snmpd.new.incoming
+ cat etc/rc.d/rc.snmpd.new > etc/rc.d/rc.snmpd.new.incoming
+ mv etc/rc.d/rc.snmpd.new.incoming etc/rc.d/rc.snmpd.new
+ fi
+
+ install_file etc/snmp/snmpd.conf.new
+ install_file etc/rc.d/rc.snmpd.new
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: 5.9/net-snmp-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 5.9
===================================================================
--- 5.9 (nonexistent)
+++ 5.9 (revision 5)
Property changes on: 5.9
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: .
===================================================================
--- . (nonexistent)
+++ . (revision 5)
Property changes on: .
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
383 Commits
1 Branch
1 Tag