Index: 7.75.0/Makefile
===================================================================
--- 7.75.0/Makefile (nonexistent)
+++ 7.75.0/Makefile (revision 5)
@@ -0,0 +1,325 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/n/curl
+
+REQUIRES = net/openssh/8.5p1
+REQUIRES += net/gnutls/3.7.1
+REQUIRES += net/ca-certificates/20211220
+REQUIRES += net/krb5/1.19.1
+REQUIRES += libs/libssh2/1.9.0
+REQUIRES += libs/zstd/1.5.2
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 7.75.0
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/n/curl/curl-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/curl-$(version)
+src_dir_name = curl-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+cacert_archive = $(SRC_PACKAGE_PATH)/packages/n/curl/cacert.pem.xz
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = net
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+CURL_PKG_NAME = curl
+CURL_PKG_VERSION = 7.75.0
+CURL_PKG_ARCH = $(PKGARCH)
+CURL_PKG_DISTRO_NAME = $(DISTRO_NAME)
+CURL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+CURL_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+CURL_PKG_SHORT_DESCRIPTION = command line URL data transfer tool
+CURL_PKG_URL = $(BUG_URL)
+CURL_PKG_LICENSE = custom
+CURL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(CURL_PKG_NAME)-pkg-description
+CURL_PKG_DESCRIPTION_FILE_IN = $(CURL_PKG_NAME)-pkg-description.in
+CURL_PKG_INSTALL_SCRIPT = $(CURL_PKG_NAME)-pkg-install.sh
+
+CURL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(CURL_PKG_NAME)-package
+
+pkg_basename = $(CURL_PKG_NAME)-$(CURL_PKG_VERSION)-$(CURL_PKG_ARCH)-$(CURL_PKG_DISTRO_NAME)-$(CURL_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(CURL_PKG)
+
+
+extra_configure_switches = --libdir=/usr/lib$(LIBSUFFIX)
+extra_configure_switches += --docdir=/usr/share/doc/$(src_dir_name)
+extra_configure_switches += --infodir=/usr/share/info
+extra_configure_switches += --mandir=/usr/share/man
+
+extra_configure_switches += --with-ca-bundle=/usr/share/curl/ca-bundle.crt
+extra_configure_switches += --with-ca-path=/etc/ssl/certs
+
+extra_configure_switches += --enable-ipv6
+extra_configure_switches += --with-libidn2=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --with-ssl=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --with-libssh2
+extra_configure_switches += --with-libssh=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --with-gssapi=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --with-gnutls=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --enable-ldap
+extra_configure_switches += --with-ldap-lib=$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/libldap.so
+extra_configure_switches += --with-lber-lib=$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/liblber.so
+extra_configure_switches += --with-zstd=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --with-zlib=$(TARGET_DEST_DIR)/usr
+
+extra_environment = KRB5CONFIG=$(TARGET_DEST_DIR)/usr/bin/krb5-config
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(extra_environment) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET) \
+ $(extra_configure_switches)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(CURL_PKG)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(env_sysroot)
+ # ======= Install /usr/share/curl/cacert.pem =======
+ @mkdir -p $(CURL_PKG)/usr/share/curl
+ @xzcat $(cacert_archive) > $(CURL_PKG)/usr/share/curl/cacert.pem
+ @( cd $(CURL_PKG)/usr/share/curl ; \
+ mv cacert.pem ca-bundle.crt ; \
+ chmod 644 ca-bundle.crt ; \
+ )
+ # ======= Install mk-ca-bundle.pl script =======
+ @mkdir -p $(CURL_PKG)/usr/share/man/man1
+ @cp -a $(SRC_DIR)/docs/mk-ca-bundle.1 $(CURL_PKG)/usr/share/man/man1
+ @mkdir -p $(CURL_PKG)/usr/bin
+ @cp -a $(SRC_DIR)/lib/mk-ca-bundle.pl $(CURL_PKG)/usr/bin
+ @chmod 755 $(CURL_PKG)/usr/bin/mk-ca-bundle.pl
+ # ======= Install Documentation =======
+ @( cd $(CURL_PKG)/usr/share/man/man3 ; \
+ for file in *.3 ; do \
+ ln=`head -n 1 $$file` ; \
+ if [ "`echo $$ln | grep '^\.so '`" != "" ] ; then \
+ origin=`echo $$ln | cut -f 2 -d ' '` ; \
+ origin=`basename $$origin` ; \
+ rm -f $$file ; \
+ ln -sf $$origin $$file ; \
+ fi ; \
+ done ; \
+ )
+ @if [ -d $(CURL_PKG)/usr/share/man ]; then \
+ ( cd $(CURL_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(CURL_PKG)/usr/doc/$(src_dir_name)
+ @cp -a $(SRC_DIR)/COPYING \
+ $(CURL_PKG)/usr/doc/$(src_dir_name)
+ @mkdir -p $(CURL_PKG)/usr/share/doc/$(src_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a COPYING README RELEASE-NOTES \
+ $(CURL_PKG)/usr/share/doc/$(src_dir_name) ; \
+ )
+ @( cd $(SRC_DIR)/docs ; \
+ cp -a BUGS* FAQ FEATURES* KNOWN_BUGS README.md THANKS TODO \
+ $(CURL_PKG)/usr/share/doc/$(src_dir_name) ; \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r CHANGES ]; then \
+ DOCSDIR=`echo $(CURL_PKG)/usr/share/doc/$(src_dir_name)` ; \
+ cat CHANGES | head -n 1000 > $$DOCSDIR/CHANGES ; \
+ touch -r CHANGES $$DOCSDIR/CHANGES ; \
+ fi \
+ )
+ # ======= remove toolchain path from target libtool *.la files =======
+ @( cd $(CURL_PKG)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libcurl.la ; \
+ )
+ # ======= remove toolchain path from target pkg-config *.pc files =======
+ @( cd $(CURL_PKG)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libcurl.pc ; \
+ )
+ # ======= Tune development '/usr/bin/curl-config' sctipt =======
+ @( cd $(CURL_PKG)/usr/bin ; \
+ sed -i "s,^prefix=/usr,prefix=$(TARGET_DEST_DIR)/usr," curl-config ; \
+ sed -i "s,\"/usr/share/curl,\"$(TARGET_DEST_DIR)/usr/share/curl," curl-config ; \
+ sed -i "s,test \"X/usr/lib,test \"X\$${prefix}/lib," curl-config ; \
+ sed -i "s,a \"X/usr/lib,a \"X\$${prefix}/lib," curl-config ; \
+ sed -i "s,L/usr/lib,L\$${prefix}/lib,g" curl-config ; \
+ sed -i "s,/usr/lib$(LIBSUFFIX)/libcurl.a,$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/libcurl.a," curl-config ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(CURL_PKG))
+ # ======= Tune target '/usr/bin/curl-config' sctipt =======
+ @( cd $(CURL_PKG)/usr/bin ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" curl-config ; \
+ sed -i "s,$(TOOLCHAIN_PATH),/usr,g" curl-config ; \
+ sed -i "s,$(TARGET)-,,g" curl-config ; \
+ sed -i "s, '--build=[^\']*',,g" curl-config ; \
+ sed -i "s, '--host=[^\']*',,g" curl-config ; \
+ sed -i "s, 'build_alias=[^\']*',,g" curl-config ; \
+ sed -i "s, 'host_alias=[^\']*',,g" curl-config ; \
+ sed -i "s, --sysroot=[^\']*',',g" curl-config ; \
+ sed -i 's, --sysroot=[^\"]*",",g' curl-config ; \
+ )
+ # ======= Tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcurl.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libcurl.la ; \
+ )
+ # ======= Tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcurl.pc ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libcurl.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(CURL_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(CURL_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(CURL_PKG)/usr/lib$(LIBSUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(CURL_PKG_DESCRIPTION_FILE): $(CURL_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(CURL_PKG_DESCRIPTION_FILE) $(CURL_PKG_INSTALL_SCRIPT)
+ @cp $(CURL_PKG_DESCRIPTION_FILE) $(CURL_PKG)/.DESCRIPTION
+ @cp $(CURL_PKG_INSTALL_SCRIPT) $(CURL_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(CURL_PKG)/.REQUIRES
+ @echo "pkgname=$(CURL_PKG_NAME)" > $(CURL_PKG)/.PKGINFO ; \
+ echo "pkgver=$(CURL_PKG_VERSION)" >> $(CURL_PKG)/.PKGINFO ; \
+ echo "arch=$(CURL_PKG_ARCH)" >> $(CURL_PKG)/.PKGINFO ; \
+ echo "distroname=$(CURL_PKG_DISTRO_NAME)" >> $(CURL_PKG)/.PKGINFO ; \
+ echo "distrover=$(CURL_PKG_DISTRO_VERSION)" >> $(CURL_PKG)/.PKGINFO ; \
+ echo "group=$(CURL_PKG_GROUP)" >> $(CURL_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(CURL_PKG_SHORT_DESCRIPTION)\"" >> $(CURL_PKG)/.PKGINFO ; \
+ echo "url=$(CURL_PKG_URL)" >> $(CURL_PKG)/.PKGINFO ; \
+ echo "license=$(CURL_PKG_LICENSE)" >> $(CURL_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(CURL_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 7.75.0/PATCHES
===================================================================
Index: 7.75.0/curl-pkg-description.in
===================================================================
--- 7.75.0/curl-pkg-description.in (nonexistent)
+++ 7.75.0/curl-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+curl: curl @VERSION@ (command line URL data transfer tool)
+curl:
+curl: Curl is a command line tool for transferring data specified with URL
+curl: syntax. The command is designed to work without user interaction or
+curl: any kind of interactivity. Curl offers a busload of useful tricks
+curl: like proxy support, user authentication, ftp upload, HTTP post, SSL
+curl: (https:) connections, cookies, file transfer resume and more.
+curl:
+curl: libcurl is a library that Curl uses to do its job. It is readily
+curl: available to be used by your software, too.
+curl:
Index: 7.75.0/curl-pkg-install.sh
===================================================================
--- 7.75.0/curl-pkg-install.sh (nonexistent)
+++ 7.75.0/curl-pkg-install.sh (revision 5)
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: 7.75.0/curl-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 7.75.0
===================================================================
--- 7.75.0 (nonexistent)
+++ 7.75.0 (revision 5)
Property changes on: 7.75.0
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 7.75.0-ppc32/Makefile
===================================================================
--- 7.75.0-ppc32/Makefile (nonexistent)
+++ 7.75.0-ppc32/Makefile (revision 5)
@@ -0,0 +1,240 @@
+
+COMPONENT_TARGETS = $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+CREATE_PPC32_PACKAGE = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/n/curl
+
+REQUIRES = net/curl/7.75.0
+REQUIRES += net/gnutls/3.7.1-ppc32
+REQUIRES += net/krb5/1.19.1-ppc32
+REQUIRES += libs/libssh2/1.9.0-ppc32
+REQUIRES += libs/zstd/1.5.2-ppc32
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 7.75.0
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/n/curl/curl-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/curl-$(version)
+src_dir_name = curl-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = net
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+CURL_32_PKG_NAME = curl-x32
+CURL_32_PKG_VERSION = 7.75.0
+CURL_32_PKG_ARCH = $(PKGARCH)
+CURL_32_PKG_DISTRO_NAME = $(DISTRO_NAME)
+CURL_32_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+CURL_32_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+CURL_32_PKG_SHORT_DESCRIPTION = command line URL data transfer tool
+CURL_32_PKG_URL = $(BUG_URL)
+CURL_32_PKG_LICENSE = custom
+CURL_32_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(CURL_32_PKG_NAME)-pkg-description
+CURL_32_PKG_DESCRIPTION_FILE_IN = $(CURL_32_PKG_NAME)-pkg-description.in
+CURL_32_PKG_INSTALL_SCRIPT = $(CURL_32_PKG_NAME)-pkg-install.sh
+
+CURL_32_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(CURL_32_PKG_NAME)-package
+
+pkg_basename = $(CURL_32_PKG_NAME)-$(CURL_32_PKG_VERSION)-$(CURL_32_PKG_ARCH)-$(CURL_32_PKG_DISTRO_NAME)-$(CURL_32_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(CURL_32_PKG)
+
+
+extra_configure_switches = --libdir=/usr/lib$(MULTILIB_PPC32_SUFFIX)
+extra_configure_switches += --docdir=/usr/share/doc/$(src_dir_name)
+extra_configure_switches += --infodir=/usr/share/info
+extra_configure_switches += --mandir=/usr/share/man
+
+extra_configure_switches += --bindir=/usr/bin/32
+
+extra_configure_switches += --with-ca-bundle=/usr/share/curl/ca-bundle.crt
+extra_configure_switches += --with-ca-path=/etc/ssl/certs
+
+extra_configure_switches += --enable-ipv6
+extra_configure_switches += --with-libidn2=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --with-ssl=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --with-libssh2
+extra_configure_switches += --with-libssh=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --with-gssapi=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --with-gnutls=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --enable-ldap
+extra_configure_switches += --with-ldap-lib=$(TARGET_DEST_DIR)/usr/lib$(MULTILIB_PPC32_SUFFIX)/libldap.so
+extra_configure_switches += --with-lber-lib=$(TARGET_DEST_DIR)/usr/lib$(MULTILIB_PPC32_SUFFIX)/liblber.so
+extra_configure_switches += --with-zstd=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --with-zlib=$(TARGET_DEST_DIR)/usr
+
+extra_environment = KRB5CONFIG=$(TARGET_DEST_DIR)/usr/bin/32/krb5-config
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+TARGET_LIB_RPATH = /lib$(MULTILIB_PPC32_SUFFIX):/usr/lib$(MULTILIB_PPC32_SUFFIX):/usr/lib/../lib$(MULTILIB_PPC32_SUFFIX)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(extra_environment) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET32) \
+ $(extra_configure_switches)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(CURL_32_PKG)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(env_sysroot)
+ @rm -rf $(CURL_32_PKG)/usr/include
+ @rm -rf $(CURL_32_PKG)/usr/share
+ # ======= remove unexpected libdir suffixes =======
+ @( cd $(CURL_32_PKG)/usr/bin/32 ; \
+ sed -i "s,\-L[^ \t]*/lib ,,g" curl-config ; \
+ )
+ @( cd $(CURL_32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX) ; \
+ sed -i "s,\-L[^ \t]*/lib ,,g" libcurl.la ; \
+ )
+ @( cd $(CURL_32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX)/pkgconfig ; \
+ sed -i "s,\-L[^ \t]*/lib ,,g" libcurl.pc ; \
+ )
+ # ======= remove toolchain path from target libtool *.la files =======
+ @( cd $(CURL_32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX) ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libcurl.la ; \
+ )
+ # ======= remove toolchain path from target pkg-config *.pc files =======
+ @( cd $(CURL_32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX)/pkgconfig ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libcurl.pc ; \
+ )
+ # ======= Tune development '/usr/bin/32/curl-config' sctipt =======
+ @( cd $(CURL_32_PKG)/usr/bin/32 ; \
+ sed -i "s,^prefix=/usr,prefix=$(TARGET_DEST_DIR)/usr," curl-config ; \
+ sed -i "s,\"/usr/share/curl,\"$(TARGET_DEST_DIR)/usr/share/curl," curl-config ; \
+ sed -i "s,test \"X/usr/lib,test \"X\$${prefix}/lib," curl-config ; \
+ sed -i "s,a \"X/usr/lib,a \"X\$${prefix}/lib," curl-config ; \
+ sed -i "s,L/usr/lib,L\$${prefix}/lib,g" curl-config ; \
+ sed -i "s,/usr/lib$(MULTILIB_PPC32_SUFFIX)/libcurl.a,$(TARGET_DEST_DIR)/usr/lib$(MULTILIB_PPC32_SUFFIX)/libcurl.a," curl-config ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(CURL_32_PKG))
+ # ======= Tune target '/usr/bin/32/curl-config' sctipt =======
+ @( cd $(CURL_32_PKG)/usr/bin/32 ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" curl-config ; \
+ sed -i "s,$(TOOLCHAIN_PATH),/usr,g" curl-config ; \
+ sed -i "s,$(TARGET)-,,g" curl-config ; \
+ sed -i "s, '--build=[^\']*',,g" curl-config ; \
+ sed -i "s, '--host=[^\']*',,g" curl-config ; \
+ sed -i "s, 'build_alias=[^\']*',,g" curl-config ; \
+ sed -i "s, 'host_alias=[^\']*',,g" curl-config ; \
+ sed -i "s, --sysroot=[^\']*',',g" curl-config ; \
+ sed -i 's, --sysroot=[^\"]*",",g' curl-config ; \
+ )
+ # ======= tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_PPC32_SUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcurl.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libcurl.la ; \
+ )
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_PPC32_SUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcurl.pc ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libcurl.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(CURL_32_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(CURL_32_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(CURL_32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(CURL_32_PKG_DESCRIPTION_FILE): $(CURL_32_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(CURL_32_PKG_DESCRIPTION_FILE) $(CURL_32_PKG_INSTALL_SCRIPT)
+ @cp $(CURL_32_PKG_DESCRIPTION_FILE) $(CURL_32_PKG)/.DESCRIPTION
+ @cp $(CURL_32_PKG_INSTALL_SCRIPT) $(CURL_32_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(CURL_32_PKG)/.REQUIRES
+ @echo "pkgname=$(CURL_32_PKG_NAME)" > $(CURL_32_PKG)/.PKGINFO ; \
+ echo "pkgver=$(CURL_32_PKG_VERSION)" >> $(CURL_32_PKG)/.PKGINFO ; \
+ echo "arch=$(CURL_32_PKG_ARCH)" >> $(CURL_32_PKG)/.PKGINFO ; \
+ echo "distroname=$(CURL_32_PKG_DISTRO_NAME)" >> $(CURL_32_PKG)/.PKGINFO ; \
+ echo "distrover=$(CURL_32_PKG_DISTRO_VERSION)" >> $(CURL_32_PKG)/.PKGINFO ; \
+ echo "group=$(CURL_32_PKG_GROUP)" >> $(CURL_32_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(CURL_32_PKG_SHORT_DESCRIPTION)\"" >> $(CURL_32_PKG)/.PKGINFO ; \
+ echo "url=$(CURL_32_PKG_URL)" >> $(CURL_32_PKG)/.PKGINFO ; \
+ echo "license=$(CURL_32_PKG_LICENSE)" >> $(CURL_32_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(CURL_32_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 7.75.0-ppc32/PATCHES
===================================================================
Index: 7.75.0-ppc32/curl-x32-pkg-description.in
===================================================================
--- 7.75.0-ppc32/curl-x32-pkg-description.in (nonexistent)
+++ 7.75.0-ppc32/curl-x32-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+curl-x32: curl-x32 @VERSION@ (command line URL data transfer tool)
+curl-x32:
+curl-x32: Curl is a command line tool for transferring data specified with URL
+curl-x32: syntax. The command is designed to work without user interaction or
+curl-x32: any kind of interactivity. Curl offers a busload of useful tricks
+curl-x32: like proxy support, user authentication, ftp upload, HTTP post, SSL
+curl-x32: (https:) connections, cookies, file transfer resume and more.
+curl-x32:
+curl-x32: libcurl is a library that Curl uses to do its job. It is readily
+curl-x32: available to be used by your software, too.
+curl-x32:
Index: 7.75.0-ppc32/curl-x32-pkg-install.sh
===================================================================
--- 7.75.0-ppc32/curl-x32-pkg-install.sh (nonexistent)
+++ 7.75.0-ppc32/curl-x32-pkg-install.sh (revision 5)
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: 7.75.0-ppc32/curl-x32-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 7.75.0-ppc32
===================================================================
--- 7.75.0-ppc32 (nonexistent)
+++ 7.75.0-ppc32 (revision 5)
Property changes on: 7.75.0-ppc32
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 7.75.0-x86_32/Makefile
===================================================================
--- 7.75.0-x86_32/Makefile (nonexistent)
+++ 7.75.0-x86_32/Makefile (revision 5)
@@ -0,0 +1,237 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC64)
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+CREATE_X86_32_PACKAGE = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/n/curl
+
+REQUIRES = net/curl/7.75.0
+REQUIRES += net/gnutls/3.7.1-x86_32
+REQUIRES += net/krb5/1.19.1-x86_32
+REQUIRES += libs/libssh2/1.9.0-x86_32
+REQUIRES += libs/zstd/1.5.2-x86_32
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 7.75.0
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/n/curl/curl-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/curl-$(version)
+src_dir_name = curl-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = net
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+CURL_32_PKG_NAME = curl-x32
+CURL_32_PKG_VERSION = 7.75.0
+CURL_32_PKG_ARCH = $(PKGARCH)
+CURL_32_PKG_DISTRO_NAME = $(DISTRO_NAME)
+CURL_32_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+CURL_32_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+CURL_32_PKG_SHORT_DESCRIPTION = command line URL data transfer tool
+CURL_32_PKG_URL = $(BUG_URL)
+CURL_32_PKG_LICENSE = custom
+CURL_32_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(CURL_32_PKG_NAME)-pkg-description
+CURL_32_PKG_DESCRIPTION_FILE_IN = $(CURL_32_PKG_NAME)-pkg-description.in
+CURL_32_PKG_INSTALL_SCRIPT = $(CURL_32_PKG_NAME)-pkg-install.sh
+
+CURL_32_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(CURL_32_PKG_NAME)-package
+
+pkg_basename = $(CURL_32_PKG_NAME)-$(CURL_32_PKG_VERSION)-$(CURL_32_PKG_ARCH)-$(CURL_32_PKG_DISTRO_NAME)-$(CURL_32_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(CURL_32_PKG)
+
+
+extra_configure_switches = --libdir=/usr/lib$(MULTILIB_X86_32_SUFFIX)
+extra_configure_switches += --docdir=/usr/share/doc/$(src_dir_name)
+extra_configure_switches += --infodir=/usr/share/info
+extra_configure_switches += --mandir=/usr/share/man
+
+extra_configure_switches += --bindir=/usr/bin/32
+
+extra_configure_switches += --with-ca-bundle=/usr/share/curl/ca-bundle.crt
+extra_configure_switches += --with-ca-path=/etc/ssl/certs
+
+extra_configure_switches += --enable-ipv6
+extra_configure_switches += --with-libidn2=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --with-ssl=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --with-libssh2
+extra_configure_switches += --with-libssh=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --with-gssapi=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --with-gnutls=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --enable-ldap
+extra_configure_switches += --with-ldap-lib=$(TARGET_DEST_DIR)/usr/lib$(MULTILIB_X86_32_SUFFIX)/libldap.so
+extra_configure_switches += --with-lber-lib=$(TARGET_DEST_DIR)/usr/lib$(MULTILIB_X86_32_SUFFIX)/liblber.so
+extra_configure_switches += --with-zstd=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --with-zlib=$(TARGET_DEST_DIR)/usr
+
+extra_environment = KRB5CONFIG=$(TARGET_DEST_DIR)/usr/bin/32/krb5-config
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+TARGET_LIB_RPATH = /lib$(MULTILIB_X86_32_SUFFIX):/usr/lib$(MULTILIB_X86_32_SUFFIX):/usr/lib/../lib$(MULTILIB_X86_32_SUFFIX)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(extra_environment) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET32) \
+ $(extra_configure_switches)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(CURL_32_PKG)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(env_sysroot)
+ @rm -rf $(CURL_32_PKG)/usr/include
+ @rm -rf $(CURL_32_PKG)/usr/share
+ # ======= remove unexpected libdir suffixes =======
+ @( cd $(CURL_32_PKG)/usr/bin/32 ; \
+ sed -i "s,\-L[^ \t]*/lib ,,g" curl-config ; \
+ )
+ @( cd $(CURL_32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX) ; \
+ sed -i "s,\-L[^ \t]*/lib ,,g" libcurl.la ; \
+ )
+ @( cd $(CURL_32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX)/pkgconfig ; \
+ sed -i "s,\-L[^ \t]*/lib ,,g" libcurl.pc ; \
+ )
+ # ======= remove toolchain path from target libtool *.la files =======
+ @( cd $(CURL_32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX) ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libcurl.la ; \
+ )
+ # ======= remove toolchain path from target pkg-config *.pc files =======
+ @( cd $(CURL_32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX)/pkgconfig ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libcurl.pc ; \
+ )
+ # ======= Tune development '/usr/bin/32/curl-config' sctipt =======
+ @( cd $(CURL_32_PKG)/usr/bin/32 ; \
+ sed -i "s,^prefix=/usr,prefix=$(TARGET_DEST_DIR)/usr," curl-config ; \
+ sed -i "s,\"/usr/share/curl,\"$(TARGET_DEST_DIR)/usr/share/curl," curl-config ; \
+ sed -i "s,test \"X/usr/lib,test \"X\$${prefix}/lib," curl-config ; \
+ sed -i "s,a \"X/usr/lib,a \"X\$${prefix}/lib," curl-config ; \
+ sed -i "s,L/usr/lib,L\$${prefix}/lib,g" curl-config ; \
+ sed -i "s,/usr/lib$(MULTILIB_X86_32_SUFFIX)/libcurl.a,$(TARGET_DEST_DIR)/usr/lib$(MULTILIB_X86_32_SUFFIX)/libcurl.a," curl-config ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(CURL_32_PKG))
+ # ======= Tune target '/usr/bin/32/curl-config' sctipt =======
+ @( cd $(CURL_32_PKG)/usr/bin/32 ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" curl-config ; \
+ sed -i "s,$(TOOLCHAIN_PATH),/usr,g" curl-config ; \
+ sed -i "s,$(TARGET)-,,g" curl-config ; \
+ sed -i "s, '--build=[^\']*',,g" curl-config ; \
+ sed -i "s, '--host=[^\']*',,g" curl-config ; \
+ sed -i "s, 'build_alias=[^\']*',,g" curl-config ; \
+ sed -i "s, 'host_alias=[^\']*',,g" curl-config ; \
+ sed -i "s, --sysroot=[^\']*',',g" curl-config ; \
+ sed -i 's, --sysroot=[^\"]*",",g' curl-config ; \
+ )
+ # ======= tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_X86_32_SUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcurl.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libcurl.la ; \
+ )
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_X86_32_SUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcurl.pc ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libcurl.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(CURL_32_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(CURL_32_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(CURL_32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(CURL_32_PKG_DESCRIPTION_FILE): $(CURL_32_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(CURL_32_PKG_DESCRIPTION_FILE) $(CURL_32_PKG_INSTALL_SCRIPT)
+ @cp $(CURL_32_PKG_DESCRIPTION_FILE) $(CURL_32_PKG)/.DESCRIPTION
+ @cp $(CURL_32_PKG_INSTALL_SCRIPT) $(CURL_32_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(CURL_32_PKG)/.REQUIRES
+ @echo "pkgname=$(CURL_32_PKG_NAME)" > $(CURL_32_PKG)/.PKGINFO ; \
+ echo "pkgver=$(CURL_32_PKG_VERSION)" >> $(CURL_32_PKG)/.PKGINFO ; \
+ echo "arch=$(CURL_32_PKG_ARCH)" >> $(CURL_32_PKG)/.PKGINFO ; \
+ echo "distroname=$(CURL_32_PKG_DISTRO_NAME)" >> $(CURL_32_PKG)/.PKGINFO ; \
+ echo "distrover=$(CURL_32_PKG_DISTRO_VERSION)" >> $(CURL_32_PKG)/.PKGINFO ; \
+ echo "group=$(CURL_32_PKG_GROUP)" >> $(CURL_32_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(CURL_32_PKG_SHORT_DESCRIPTION)\"" >> $(CURL_32_PKG)/.PKGINFO ; \
+ echo "url=$(CURL_32_PKG_URL)" >> $(CURL_32_PKG)/.PKGINFO ; \
+ echo "license=$(CURL_32_PKG_LICENSE)" >> $(CURL_32_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(CURL_32_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 7.75.0-x86_32/PATCHES
===================================================================
Index: 7.75.0-x86_32/curl-x32-pkg-description.in
===================================================================
--- 7.75.0-x86_32/curl-x32-pkg-description.in (nonexistent)
+++ 7.75.0-x86_32/curl-x32-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+curl-x32: curl-x32 @VERSION@ (command line URL data transfer tool)
+curl-x32:
+curl-x32: Curl is a command line tool for transferring data specified with URL
+curl-x32: syntax. The command is designed to work without user interaction or
+curl-x32: any kind of interactivity. Curl offers a busload of useful tricks
+curl-x32: like proxy support, user authentication, ftp upload, HTTP post, SSL
+curl-x32: (https:) connections, cookies, file transfer resume and more.
+curl-x32:
+curl-x32: libcurl is a library that Curl uses to do its job. It is readily
+curl-x32: available to be used by your software, too.
+curl-x32:
Index: 7.75.0-x86_32/curl-x32-pkg-install.sh
===================================================================
--- 7.75.0-x86_32/curl-x32-pkg-install.sh (nonexistent)
+++ 7.75.0-x86_32/curl-x32-pkg-install.sh (revision 5)
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: 7.75.0-x86_32/curl-x32-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 7.75.0-x86_32
===================================================================
--- 7.75.0-x86_32 (nonexistent)
+++ 7.75.0-x86_32 (revision 5)
Property changes on: 7.75.0-x86_32
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: .
===================================================================
--- . (nonexistent)
+++ . (revision 5)
Property changes on: .
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
383 Commits
1 Branch
1 Tag