Index: pip/22.2.2/Makefile
===================================================================
--- pip/22.2.2/Makefile (nonexistent)
+++ pip/22.2.2/Makefile (revision 5)
@@ -0,0 +1,191 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/d/python-modules/pip
+
+REQUIRES = dev/python3-modules/setuptools/65.5.0
+
+# ======= __END_OF_REQUIRES__ =======
+
+PYTHON3_VERSION = 3.10
+
+
+version = 22.2.2
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/d/python-modules/pip/pip-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/pip-$(version)
+src_dir_name = pip-$(version)
+doc_dir_name = pip3-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = app
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+PIP3_PKG_NAME = pip3
+PIP3_PKG_VERSION = 22.2.2
+PIP3_PKG_ARCH = $(PKGARCH)
+PIP3_PKG_DISTRO_NAME = $(DISTRO_NAME)
+PIP3_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+PIP3_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+PIP3_PKG_SHORT_DESCRIPTION = Python packages tool
+PIP3_PKG_URL = $(BUG_URL)
+PIP3_PKG_LICENSE = MIT
+PIP3_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(PIP3_PKG_NAME)-pkg-description
+PIP3_PKG_DESCRIPTION_FILE_IN = $(PIP3_PKG_NAME)-pkg-description.in
+PIP3_PKG_INSTALL_SCRIPT = $(PIP3_PKG_NAME)-pkg-install.sh
+
+PIP3_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(PIP3_PKG_NAME)-package
+
+pkg_basename = $(PIP3_PKG_NAME)-$(PIP3_PKG_VERSION)-$(PIP3_PKG_ARCH)-$(PIP3_PKG_DISTRO_NAME)-$(PIP3_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../../build-system/core.mk
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @( cd $(SRC_DIR) ; \
+ $(PYTHON3) setup.py egg_info ; \
+ $(PYTHON3) setup.py build ; \
+ )
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(PIP3_PKG)/usr/bin
+ @( cd $(SRC_DIR) ; \
+ $(PYTHON3) setup.py install \
+ --single-version-externally-managed \
+ --prefix=/usr \
+ --install-purelib=/usr/lib$(LIBSUFFIX) \
+ --install-platlib=/usr/lib$(LIBSUFFIX) \
+ --install-lib=/usr/lib$(LIBSUFFIX)/python$(PYTHON3_VERSION)/site-packages \
+ --root=$(PIP3_PKG) ; \
+ )
+ @( cd $(PIP3_PKG)/usr/bin ; \
+ rm -f pip3 pip ; ln -sf pip$(PYTHON3_VERSION) pip3 ; \
+ sed -i 's,$(BUILDSYSTEM),,' pip$(PYTHON3_VERSION) ; \
+ )
+ # ======= Install Documentation =======
+ @mkdir -p $(PIP3_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(SRC_DIR)/AUTHORS.txt $(SRC_DIR)/LICENSE.txt \
+ $(PIP3_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(PIP3_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a AUTHORS.txt LICENSE.txt README.rst \
+ $(PIP3_PKG)/usr/share/doc/$(doc_dir_name) ; \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r NEWS.txt ]; then \
+ DOCSDIR=`echo $(PIP3_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat NEWS.txt | head -n 1000 > $$DOCSDIR/NEWS.txt ; \
+ touch -r NEWS.txt $$DOCSDIR/NEWS.txt ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(PIP3_PKG))
+ @touch $@
+
+$(PIP3_PKG_DESCRIPTION_FILE): $(PIP3_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(PIP3_PKG_DESCRIPTION_FILE) $(PIP3_PKG_INSTALL_SCRIPT)
+ @cp $(PIP3_PKG_DESCRIPTION_FILE) $(PIP3_PKG)/.DESCRIPTION
+ @cp $(PIP3_PKG_INSTALL_SCRIPT) $(PIP3_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(PIP3_PKG)/.REQUIRES
+ @echo "pkgname=$(PIP3_PKG_NAME)" > $(PIP3_PKG)/.PKGINFO ; \
+ echo "pkgver=$(PIP3_PKG_VERSION)" >> $(PIP3_PKG)/.PKGINFO ; \
+ echo "arch=$(PIP3_PKG_ARCH)" >> $(PIP3_PKG)/.PKGINFO ; \
+ echo "distroname=$(PIP3_PKG_DISTRO_NAME)" >> $(PIP3_PKG)/.PKGINFO ; \
+ echo "distrover=$(PIP3_PKG_DISTRO_VERSION)" >> $(PIP3_PKG)/.PKGINFO ; \
+ echo "group=$(PIP3_PKG_GROUP)" >> $(PIP3_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(PIP3_PKG_SHORT_DESCRIPTION)\"" >> $(PIP3_PKG)/.PKGINFO ; \
+ echo "url=$(PIP3_PKG_URL)" >> $(PIP3_PKG)/.PKGINFO ; \
+ echo "license=$(PIP3_PKG_LICENSE)" >> $(PIP3_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(PIP3_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: pip/22.2.2/PATCHES
===================================================================
Index: pip/22.2.2/pip3-pkg-description.in
===================================================================
--- pip/22.2.2/pip3-pkg-description.in (nonexistent)
+++ pip/22.2.2/pip3-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+pip3: pip3 @VERSION@ (Python packages tool)
+pip3:
+pip3: The PyPA recommended tool for installing Python packages.
+pip3:
+pip3: Python 2.7.9 and later (on the python2 series), and Python 3.4 and
+pip3: later include pip by default, so you may have pip already.
+pip3:
+pip3: web site: https://pip.pypa.io
+pip3:
+pip3:
+pip3:
Index: pip/22.2.2/pip3-pkg-install.sh
===================================================================
--- pip/22.2.2/pip3-pkg-install.sh (nonexistent)
+++ pip/22.2.2/pip3-pkg-install.sh (revision 5)
@@ -0,0 +1,61 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ for file in pip ; do
+ rm -f usr/bin/${file}
+ ln -sfr usr/bin/${file}3 usr/bin/${file}
+ done
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ for file in pip ; do
+ rm -f usr/bin/${file}
+ if [ -L "usr/bin/${file}2" ] ; then
+ ln -sfr usr/bin/${file}2 usr/bin/${file}
+ fi
+ done
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: pip/22.2.2/pip3-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: pip/22.2.2
===================================================================
--- pip/22.2.2 (nonexistent)
+++ pip/22.2.2 (revision 5)
Property changes on: pip/22.2.2
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: pip
===================================================================
--- pip (nonexistent)
+++ pip (revision 5)
Property changes on: pip
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: setuptools/65.5.0/Makefile
===================================================================
--- setuptools/65.5.0/Makefile (nonexistent)
+++ setuptools/65.5.0/Makefile (revision 5)
@@ -0,0 +1,197 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/d/python-modules/setuptools
+
+REQUIRES = dev/python3/3.10.8
+
+# ======= __END_OF_REQUIRES__ =======
+
+PYTHON3_VERSION = 3.10
+
+
+version = 65.5.0
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/d/python-modules/setuptools/setuptools-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/setuptools-$(version)
+src_dir_name = setuptools-$(version)
+doc_dir_name = setuptools3-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = app
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+SETUPTOOLS3_PKG_NAME = setuptools3
+SETUPTOOLS3_PKG_VERSION = 65.5.0
+SETUPTOOLS3_PKG_ARCH = $(PKGARCH)
+SETUPTOOLS3_PKG_DISTRO_NAME = $(DISTRO_NAME)
+SETUPTOOLS3_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+SETUPTOOLS3_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+SETUPTOOLS3_PKG_SHORT_DESCRIPTION = Easily Python packages tool
+SETUPTOOLS3_PKG_URL = $(BUG_URL)
+SETUPTOOLS3_PKG_LICENSE = MIT
+SETUPTOOLS3_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(SETUPTOOLS3_PKG_NAME)-pkg-description
+SETUPTOOLS3_PKG_DESCRIPTION_FILE_IN = $(SETUPTOOLS3_PKG_NAME)-pkg-description.in
+SETUPTOOLS3_PKG_INSTALL_SCRIPT = $(SETUPTOOLS3_PKG_NAME)-pkg-install.sh
+
+SETUPTOOLS3_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(SETUPTOOLS3_PKG_NAME)-package
+
+pkg_basename = $(SETUPTOOLS3_PKG_NAME)-$(SETUPTOOLS3_PKG_VERSION)-$(SETUPTOOLS3_PKG_ARCH)-$(SETUPTOOLS3_PKG_DISTRO_NAME)-$(SETUPTOOLS3_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../../build-system/core.mk
+
+#
+# NOTE:
+# ====
+# Command `mkdir -p build/scripts-3.10` and install option --root=/ are needed to avoid
+# Python errors related to build procedure and deprecated easy_install utility.
+#
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @( cd $(SRC_DIR) ; \
+ rm -f setuptools/*.exe ; \
+ mkdir -p build/scripts-3.10 ; \
+ sed -i 's,^tag_build.*,tag_build =,' setup.cfg ; \
+ sed -i 's,^tag_date.*,tag_date = 0,' setup.cfg ; \
+ $(PYTHON3) setup.py egg_info ; \
+ )
+ @touch $@
+
+
+$(install_target): $(build_target)
+ @mkdir -p $(SETUPTOOLS3_PKG)
+ @( cd $(SRC_DIR) ; \
+ $(PYTHON3) setup.py install \
+ --single-version-externally-managed \
+ --prefix=/usr \
+ --install-purelib=/usr/lib$(LIBSUFFIX) \
+ --install-platlib=/usr/lib$(LIBSUFFIX) \
+ --install-lib=/usr/lib$(LIBSUFFIX)/python$(PYTHON3_VERSION)/site-packages \
+ --root=$(SETUPTOOLS3_PKG) ; \
+ )
+ # ======= Install Documentation =======
+ @mkdir -p $(SETUPTOOLS3_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(SRC_DIR)/LICENSE \
+ $(SETUPTOOLS3_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(SETUPTOOLS3_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a LICENSE README.rst \
+ $(SETUPTOOLS3_PKG)/usr/share/doc/$(doc_dir_name) ; \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r CHANGES.rst ]; then \
+ DOCSDIR=`echo $(SETUPTOOLS3_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat CHANGES.rst | head -n 1000 > $$DOCSDIR/CHANGES.rst ; \
+ touch -r CHANGES.rst $$DOCSDIR/CHANGES.rst ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(SETUPTOOLS3_PKG))
+ @touch $@
+
+$(SETUPTOOLS3_PKG_DESCRIPTION_FILE): $(SETUPTOOLS3_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(SETUPTOOLS3_PKG_DESCRIPTION_FILE) $(SETUPTOOLS3_PKG_INSTALL_SCRIPT)
+ @cp $(SETUPTOOLS3_PKG_DESCRIPTION_FILE) $(SETUPTOOLS3_PKG)/.DESCRIPTION
+ @cp $(SETUPTOOLS3_PKG_INSTALL_SCRIPT) $(SETUPTOOLS3_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(SETUPTOOLS3_PKG)/.REQUIRES
+ @echo "pkgname=$(SETUPTOOLS3_PKG_NAME)" > $(SETUPTOOLS3_PKG)/.PKGINFO ; \
+ echo "pkgver=$(SETUPTOOLS3_PKG_VERSION)" >> $(SETUPTOOLS3_PKG)/.PKGINFO ; \
+ echo "arch=$(SETUPTOOLS3_PKG_ARCH)" >> $(SETUPTOOLS3_PKG)/.PKGINFO ; \
+ echo "distroname=$(SETUPTOOLS3_PKG_DISTRO_NAME)" >> $(SETUPTOOLS3_PKG)/.PKGINFO ; \
+ echo "distrover=$(SETUPTOOLS3_PKG_DISTRO_VERSION)" >> $(SETUPTOOLS3_PKG)/.PKGINFO ; \
+ echo "group=$(SETUPTOOLS3_PKG_GROUP)" >> $(SETUPTOOLS3_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(SETUPTOOLS3_PKG_SHORT_DESCRIPTION)\"" >> $(SETUPTOOLS3_PKG)/.PKGINFO ; \
+ echo "url=$(SETUPTOOLS3_PKG_URL)" >> $(SETUPTOOLS3_PKG)/.PKGINFO ; \
+ echo "license=$(SETUPTOOLS3_PKG_LICENSE)" >> $(SETUPTOOLS3_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(SETUPTOOLS3_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: setuptools/65.5.0/PATCHES
===================================================================
Index: setuptools/65.5.0/setuptools3-pkg-description.in
===================================================================
--- setuptools/65.5.0/setuptools3-pkg-description.in (nonexistent)
+++ setuptools/65.5.0/setuptools3-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+setuptools3: setuptools3 @VERSION@ (Easily Python packages tool)
+setuptools3:
+setuptools3: Setuptools is a fully-featured, actively-maintained, and stable
+setuptools3: library designed to facilitate packaging Python projects.
+setuptools3:
+setuptools3: web site: https://pypi.python.org/pypi/setuptools
+setuptools3:
+setuptools3:
+setuptools3:
+setuptools3:
+setuptools3:
Index: setuptools/65.5.0/setuptools3-pkg-install.sh
===================================================================
--- setuptools/65.5.0/setuptools3-pkg-install.sh (nonexistent)
+++ setuptools/65.5.0/setuptools3-pkg-install.sh (revision 5)
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: setuptools/65.5.0/setuptools3-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: setuptools/65.5.0
===================================================================
--- setuptools/65.5.0 (nonexistent)
+++ setuptools/65.5.0 (revision 5)
Property changes on: setuptools/65.5.0
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: setuptools
===================================================================
--- setuptools (nonexistent)
+++ setuptools (revision 5)
Property changes on: setuptools
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: .
===================================================================
--- . (nonexistent)
+++ . (revision 5)
Property changes on: .
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
383 Commits
1 Branch
1 Tag