Index: perl-b-c/1.57/Makefile
===================================================================
--- perl-b-c/1.57/Makefile (nonexistent)
+++ perl-b-c/1.57/Makefile (revision 5)
@@ -0,0 +1,299 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/d/perl-modules/CPAN/B-C
+
+REQUIRES = dev/perl/5.36.0
+REQUIRES += app/db/18.1.40
+REQUIRES += libs/gdbm/1.23
+REQUIRES += net/libnsl/1.3.0
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 1.57
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/d/perl-modules/CPAN/B-C/B-C-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/B-C-$(version)
+src_dir_name = B-C-$(version)
+doc_dir_name = perl-b-c-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = dev
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+PERL_PKG_NAME = perl-b-c
+PERL_PKG_VERSION = 1.57
+PERL_PKG_ARCH = $(TOOLCHAIN)
+PERL_PKG_DISTRO_NAME = $(DISTRO_NAME)
+PERL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+PERL_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+PERL_PKG_SHORT_DESCRIPTION = Perl C translation backend
+PERL_PKG_URL = $(BUG_URL)
+PERL_PKG_LICENSE = Artistic-v1.0
+PERL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-description
+PERL_PKG_DESCRIPTION_FILE_IN = $(PERL_PKG_NAME)-pkg-description.in
+PERL_PKG_INSTALL_SCRIPT = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-install.sh
+PERL_PKG_INSTALL_SCRIPT_IN = $(PERL_PKG_NAME)-pkg-install.sh.in
+
+PERL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-package
+
+pkg_basename = $(PERL_PKG_NAME)-$(PERL_PKG_VERSION)-$(PERL_PKG_ARCH)-$(PERL_PKG_DISTRO_NAME)-$(PERL_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(PERL_PKG)
+
+
+#
+# Common Perl5 Environment:
+# ========================
+#
+perl_environment = INSTALLDIRS=vendor
+
+perl_environment += PERL_LIB='$(TARGET_DEST_DIR)/usr/share/perl5'
+perl_environment += PERL_ARCHLIB='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5'
+perl_environment += PERL_INC='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += PERL_INCDEP='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+
+perl_environment += SITELIBEXP='/usr/share/perl5/site_perl'
+perl_environment += SITEARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+perl_environment += VENDORLIBEXP='/usr/share/perl5/vendor_perl'
+perl_environment += VENDORARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += PERLPREFIX='/usr'
+perl_environment += INSTALLPRIVLIB='/usr/share/perl5'
+perl_environment += INSTALLARCHLIB='/usr/lib$(LIBSUFFIX)/perl5'
+
+perl_environment += SITEPREFIX='/usr'
+perl_environment += INSTALLSITELIB='/usr/share/perl5/site_perl'
+perl_environment += INSTALLSITEARCH='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+
+perl_environment += VENDORPREFIX='/usr'
+perl_environment += INSTALLVENDORLIB='/usr/share/perl5/vendor_perl'
+perl_environment += INSTALLVENDORARCH='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += INSTALLBIN='/usr/bin'
+perl_environment += INSTALLSITEBIN='/usr/bin'
+perl_environment += INSTALLVENDORBIN='/usr/bin'
+
+perl_environment += INSTALLSCRIPT='/usr/bin'
+perl_environment += INSTALLSITESCRIPT='/usr/bin'
+perl_environment += INSTALLVENDORSCRIPT='/usr/bin'
+
+perl_environment += INSTALLMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLSITEMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLVENDORMAN1DIR='/usr/share/man/man1'
+
+perl_environment += INSTALLMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLSITEMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLVENDORMAN3DIR='/usr/share/man/man3'
+
+#
+# HW Specific Perl5 Environment:
+# =============================
+#
+suppress-warnings = -Wno-unused-function -Wno-unused-parameter
+
+perl_environment += AR=$(AR)
+perl_environment += RANLIB=$(RANLIB)
+perl_environment += CC='$(CC) --sysroot=$(TARGET_DEST_DIR) $(ARCH_OPTIMIZATION) $(ARCH_FLAGS) $(ARCH_DEFS)'
+perl_environment += LD='$(CC) --sysroot=$(TARGET_DEST_DIR) -shared'
+perl_environment += LDFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCFLAGS='$(CFLAGS) -I$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE $(suppress-warnings)'
+perl_environment += LDDLFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCCDLFLAGS='-fPIC'
+perl_environment += CCDLFLAGS='-Wl,-E -Wl,-rpath,/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += FULL_AR=$(AR)
+perl_environment += OSNAME=linux
+perl_environment += OSVERS=
+perl_environment += LIBC=
+
+#
+# Give the path of target machine PERL headers to the ExtUtils::MakeMaker for creating
+# the PERL_HDRS list in the resulting Makefile created by `perl Makefile.PL` command.
+#
+# see: _perl_header_files() fuction in the MM_Any.pm script to understand PERL_SRC env.
+#
+perl_src_hdrs = PERL_SRC=$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE
+perl_src_hdrs += LANG=
+
+#
+# Module Specific Perl5 Environment:
+# =================================
+#
+
+perl_local_pod = usr/lib$(LIBSUFFIX)/perl5/perllocal.pod
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(perl_src_hdrs) $(PERL) Makefile.PL $(perl_environment) ; \
+ )
+ # ======= build the perl-b-c module =======
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) $(perl_environment) ; \
+ )
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(PERL_PKG)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(perl_environment) $(env_sysroot) ; \
+ )
+ @find $(PERL_PKG) -name '*.so' -exec chmod 755 {} \;
+ @mkdir -p $(PERL_PKG)/usr/lib$(LIBSUFFIX)/perl5/CORE
+ @cat $(SRC_DIR)/cc_runtime.h > $(PERL_PKG)/usr/lib$(LIBSUFFIX)/perl5/CORE/cc_runtime.h
+ @sed -i 's,$(BUILDSYSTEM),,' $(PERL_PKG)/usr/lib$(LIBSUFFIX)/perl5/vendor_perl/B/C/Config.pm
+ @( cd $(PERL_PKG)/usr/bin ; \
+ sed -i 's,$(BUILDSYSTEM),,' assemble cc_harness disassemble perlcc ; \
+ )
+ @find $(PERL_PKG) -name '.packlist' -delete
+ @rm -f $(PERL_PKG)/$(perl_local_pod)
+ # ======= Install Documentation =======
+ @if [ -d $(PERL_PKG)/usr/share/man ]; then \
+ ( cd $(PERL_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(SRC_DIR)/Artistic $(SRC_DIR)/Copying \
+ $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a Artistic Copying NOTES README \
+ $(PERL_PKG)/usr/share/doc/$(doc_dir_name) \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r Changes ]; then \
+ DOCSDIR=`echo $(PERL_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat Changes | head -n 1000 > $$DOCSDIR/Changes ; \
+ touch -r Changes $$DOCSDIR/Changes ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(PERL_PKG))
+ # ======= Strip binaries =======
+ @( cd $(PERL_PKG) ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ @touch $@
+
+$(PERL_PKG_DESCRIPTION_FILE): $(PERL_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(PERL_PKG_INSTALL_SCRIPT): $(PERL_PKG_INSTALL_SCRIPT_IN)
+ @cat $< | $(SED) -e "s,@PERL_LOCAL_POD@,$(perl_local_pod),g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG_INSTALL_SCRIPT)
+ @cp $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG)/.DESCRIPTION
+ @cp $(PERL_PKG_INSTALL_SCRIPT) $(PERL_PKG)/.INSTALL
+ @chmod a+x $(PERL_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(PERL_PKG)/.REQUIRES
+ @echo "pkgname=$(PERL_PKG_NAME)" > $(PERL_PKG)/.PKGINFO ; \
+ echo "pkgver=$(PERL_PKG_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "arch=$(PERL_PKG_ARCH)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distroname=$(PERL_PKG_DISTRO_NAME)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distrover=$(PERL_PKG_DISTRO_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "group=$(PERL_PKG_GROUP)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(PERL_PKG_SHORT_DESCRIPTION)\"" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "url=$(PERL_PKG_URL)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "license=$(PERL_PKG_LICENSE)" >> $(PERL_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(PERL_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: perl-b-c/1.57/PATCHES
===================================================================
Index: perl-b-c/1.57/perl-b-c-pkg-description.in
===================================================================
--- perl-b-c/1.57/perl-b-c-pkg-description.in (nonexistent)
+++ perl-b-c/1.57/perl-b-c-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+perl-b-c: perl-b-c @VERSION@ (Perl C translation backend)
+perl-b-c:
+perl-b-c: B::CC - Perl compiler's optimized C translation backend.
+perl-b-c:
+perl-b-c: This compiler backend takes Perl source and generates C source code
+perl-b-c: corresponding to the flow of your program with unrolled ops and
+perl-b-c: optimised stack handling and lexicals variable types.
+perl-b-c:
+perl-b-c:
+perl-b-c:
+perl-b-c:
Index: perl-b-c/1.57/perl-b-c-pkg-install.sh.in
===================================================================
--- perl-b-c/1.57/perl-b-c-pkg-install.sh.in (nonexistent)
+++ perl-b-c/1.57/perl-b-c-pkg-install.sh.in (revision 5)
@@ -0,0 +1,64 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ if ! grep "DBI|" @PERL_LOCAL_POD@ 1> /dev/null 2> /dev/null ; then
+ cat << EOF >> @PERL_LOCAL_POD@
+=head2 Sat Nov 5 19:42:50 2022: C<Module> L<B::C|B::C>
+
+=over 4
+
+=item *
+
+C<installed into: /usr/share/perl5/vendor_perl>
+
+=item *
+
+C<LINKTYPE: dynamic>
+
+=item *
+
+C<VERSION: 1.57>
+
+=item *
+
+C<EXE_FILES: script/assemble script/cc_harness script/disassemble script/perlcc>
+
+=back
+
+EOF
+ fi
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: perl-b-c/1.57/perl-b-c-pkg-install.sh.in
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: perl-b-c/1.57
===================================================================
--- perl-b-c/1.57 (nonexistent)
+++ perl-b-c/1.57 (revision 5)
Property changes on: perl-b-c/1.57
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-b-c
===================================================================
--- perl-b-c (nonexistent)
+++ perl-b-c (revision 5)
Property changes on: perl-b-c
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-dbd-mysql/4.050/Makefile
===================================================================
--- perl-dbd-mysql/4.050/Makefile (nonexistent)
+++ perl-dbd-mysql/4.050/Makefile (revision 5)
@@ -0,0 +1,314 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/d/perl-modules/CPAN/DBD-mysql
+
+REQUIRES = dev/perl/5.36.0
+REQUIRES += dev/perl-modules/perl-devel-checklib/1.16
+REQUIRES += dev/perl-modules/perl-dbi/1.643
+REQUIRES += app/mariadb/10.6.5
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 4.050
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/d/perl-modules/CPAN/DBD-mysql/DBD-mysql-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/DBD-mysql-$(version)
+src_dir_name = DBD-mysql-$(version)
+doc_dir_name = perl-dbd-mysql-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = dev
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+PERL_PKG_NAME = perl-dbd-mysql
+PERL_PKG_VERSION = 4.050
+PERL_PKG_ARCH = $(TOOLCHAIN)
+PERL_PKG_DISTRO_NAME = $(DISTRO_NAME)
+PERL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+PERL_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+PERL_PKG_SHORT_DESCRIPTION = DBD MySQL
+PERL_PKG_URL = $(BUG_URL)
+PERL_PKG_LICENSE = GPLv1
+PERL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-description
+PERL_PKG_DESCRIPTION_FILE_IN = $(PERL_PKG_NAME)-pkg-description.in
+PERL_PKG_INSTALL_SCRIPT = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-install.sh
+PERL_PKG_INSTALL_SCRIPT_IN = $(PERL_PKG_NAME)-pkg-install.sh.in
+
+PERL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-package
+
+pkg_basename = $(PERL_PKG_NAME)-$(PERL_PKG_VERSION)-$(PERL_PKG_ARCH)-$(PERL_PKG_DISTRO_NAME)-$(PERL_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(PERL_PKG)
+
+
+#
+# Common Perl5 Environment:
+# ========================
+#
+perl_environment = INSTALLDIRS=vendor
+
+perl_environment += PERL_LIB='$(TARGET_DEST_DIR)/usr/share/perl5'
+perl_environment += PERL_ARCHLIB='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5'
+perl_environment += PERL_INC='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += PERL_INCDEP='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+
+perl_environment += SITELIBEXP='/usr/share/perl5/site_perl'
+perl_environment += SITEARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+perl_environment += VENDORLIBEXP='/usr/share/perl5/vendor_perl'
+perl_environment += VENDORARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += PERLPREFIX='/usr'
+perl_environment += INSTALLPRIVLIB='/usr/share/perl5'
+perl_environment += INSTALLARCHLIB='/usr/lib$(LIBSUFFIX)/perl5'
+
+perl_environment += SITEPREFIX='/usr'
+perl_environment += INSTALLSITELIB='/usr/share/perl5/site_perl'
+perl_environment += INSTALLSITEARCH='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+
+perl_environment += VENDORPREFIX='/usr'
+perl_environment += INSTALLVENDORLIB='/usr/share/perl5/vendor_perl'
+perl_environment += INSTALLVENDORARCH='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += INSTALLBIN='/usr/bin'
+perl_environment += INSTALLSITEBIN='/usr/bin'
+perl_environment += INSTALLVENDORBIN='/usr/bin'
+
+perl_environment += INSTALLSCRIPT='/usr/bin'
+perl_environment += INSTALLSITESCRIPT='/usr/bin'
+perl_environment += INSTALLVENDORSCRIPT='/usr/bin'
+
+perl_environment += INSTALLMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLSITEMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLVENDORMAN1DIR='/usr/share/man/man1'
+
+perl_environment += INSTALLMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLSITEMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLVENDORMAN3DIR='/usr/share/man/man3'
+
+#
+# HW Specific Perl5 Environment:
+# =============================
+#
+suppress-warnings = -Wno-unused-function -Wno-unused-parameter -Wno-incompatible-pointer-types
+
+#
+# Do not use mariadb_config on cross-compilation:
+#
+mysql-cflags = -I$(TARGET_DEST_DIR)/usr/include/mysql -I$(TARGET_DEST_DIR)/usr/include/mysql/mysql
+mysql-ldflags = -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX) -lmariadb
+
+perl_environment += LIBS='$(mysql-ldflags)'
+
+perl_environment += AR=$(AR)
+perl_environment += RANLIB=$(RANLIB)
+perl_environment += CC='$(CC) --sysroot=$(TARGET_DEST_DIR) $(ARCH_OPTIMIZATION) $(ARCH_FLAGS) $(ARCH_DEFS)'
+perl_environment += LD='$(CC) --sysroot=$(TARGET_DEST_DIR) -shared'
+perl_environment += LDFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE $(mysql-ldflags)'
+perl_environment += CCFLAGS='$(CFLAGS) -I$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE $(mysql-cflags) $(suppress-warnings)'
+perl_environment += LDDLFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCCDLFLAGS='-fPIC'
+perl_environment += CCDLFLAGS='-Wl,-E -Wl,-rpath,/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += FULL_AR=$(AR)
+perl_environment += OSNAME=linux
+perl_environment += OSVERS=
+perl_environment += LIBC=
+
+#
+# Give the path of target machine PERL headers to the ExtUtils::MakeMaker for creating
+# the PERL_HDRS list in the resulting Makefile created by `perl Makefile.PL` command.
+#
+# see: _perl_header_files() fuction in the MM_Any.pm script to understand PERL_SRC env.
+#
+perl_src_hdrs = PERL_SRC=$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE
+
+#
+# Module Specific Perl5 Environment:
+# =================================
+#
+
+perl_local_pod = usr/lib$(LIBSUFFIX)/perl5/perllocal.pod
+
+
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(perl_src_hdrs) $(PERL) Makefile.PL $(perl_environment) ; \
+ )
+ # ======= build the perl-dbd-mysql module =======
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) $(perl_environment) ; \
+ )
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(PERL_PKG)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(perl_environment) $(env_sysroot) ; \
+ )
+ @find $(PERL_PKG) -name '.packlist' -delete
+ @rm -f $(PERL_PKG)/$(perl_local_pod)
+ @chmod 755 $(PERL_PKG)/usr/lib$(LIBSUFFIX)/perl5/vendor_perl/auto/DBD/mysql/mysql.so
+ # ======= Install Documentation =======
+ @if [ -d $(PERL_PKG)/usr/share/man ]; then \
+ ( cd $(PERL_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(SRC_DIR)/LICENSE \
+ $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a LICENSE README.md \
+ $(PERL_PKG)/usr/share/doc/$(doc_dir_name) \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r Changes ]; then \
+ DOCSDIR=`echo $(PERL_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat Changes | head -n 1000 > $$DOCSDIR/Changes ; \
+ touch -r Changes $$DOCSDIR/Changes ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(PERL_PKG))
+ # ======= Strip binaries =======
+ @( cd $(PERL_PKG) ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(PERL_PKG)/usr/lib$(LIBSUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(PERL_PKG_DESCRIPTION_FILE): $(PERL_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(PERL_PKG_INSTALL_SCRIPT): $(PERL_PKG_INSTALL_SCRIPT_IN)
+ @cat $< | $(SED) -e "s,@PERL_LOCAL_POD@,$(perl_local_pod),g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG_INSTALL_SCRIPT)
+ @cp $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG)/.DESCRIPTION
+ @cp $(PERL_PKG_INSTALL_SCRIPT) $(PERL_PKG)/.INSTALL
+ @chmod a+x $(PERL_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(PERL_PKG)/.REQUIRES
+ @echo "pkgname=$(PERL_PKG_NAME)" > $(PERL_PKG)/.PKGINFO ; \
+ echo "pkgver=$(PERL_PKG_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "arch=$(PERL_PKG_ARCH)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distroname=$(PERL_PKG_DISTRO_NAME)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distrover=$(PERL_PKG_DISTRO_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "group=$(PERL_PKG_GROUP)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(PERL_PKG_SHORT_DESCRIPTION)\"" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "url=$(PERL_PKG_URL)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "license=$(PERL_PKG_LICENSE)" >> $(PERL_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(PERL_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: perl-dbd-mysql/4.050/PATCHES
===================================================================
Index: perl-dbd-mysql/4.050/perl-dbd-mysql-pkg-description.in
===================================================================
--- perl-dbd-mysql/4.050/perl-dbd-mysql-pkg-description.in (nonexistent)
+++ perl-dbd-mysql/4.050/perl-dbd-mysql-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+perl-dbd-mysql: perl-dbd-mysql @VERSION@ (DBD MySQL)
+perl-dbd-mysql:
+perl-dbd-mysql: This is the Perl DBI driver for access to MySQL databases.
+perl-dbd-mysql:
+perl-dbd-mysql:
+perl-dbd-mysql:
+perl-dbd-mysql:
+perl-dbd-mysql:
+perl-dbd-mysql:
+perl-dbd-mysql:
+perl-dbd-mysql:
Index: perl-dbd-mysql/4.050/perl-dbd-mysql-pkg-install.sh.in
===================================================================
--- perl-dbd-mysql/4.050/perl-dbd-mysql-pkg-install.sh.in (nonexistent)
+++ perl-dbd-mysql/4.050/perl-dbd-mysql-pkg-install.sh.in (revision 5)
@@ -0,0 +1,64 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ if ! grep "DBD::mysql|" @PERL_LOCAL_POD@ 1> /dev/null 2> /dev/null ; then
+ cat << EOF >> @PERL_LOCAL_POD@
+=head2 Sat Jan 15 23:19:51 2022: C<Module> L<DBD::mysql|DBD::mysql>
+
+=over 4
+
+=item *
+
+C<installed into: /usr/share/perl5/vendor_perl>
+
+=item *
+
+C<LINKTYPE: dynamic>
+
+=item *
+
+C<VERSION: 4.050>
+
+=item *
+
+C<EXE_FILES: >
+
+=back
+
+EOF
+ fi
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: perl-dbd-mysql/4.050/perl-dbd-mysql-pkg-install.sh.in
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: perl-dbd-mysql/4.050
===================================================================
--- perl-dbd-mysql/4.050 (nonexistent)
+++ perl-dbd-mysql/4.050 (revision 5)
Property changes on: perl-dbd-mysql/4.050
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-dbd-mysql
===================================================================
--- perl-dbd-mysql (nonexistent)
+++ perl-dbd-mysql (revision 5)
Property changes on: perl-dbd-mysql
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-dbd-pg/3.16.0/Makefile
===================================================================
--- perl-dbd-pg/3.16.0/Makefile (nonexistent)
+++ perl-dbd-pg/3.16.0/Makefile (revision 5)
@@ -0,0 +1,318 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/d/perl-modules/CPAN/DBD-Pg
+
+REQUIRES = dev/perl/5.36.0
+REQUIRES += dev/perl-modules/perl-dbi/1.643
+REQUIRES += app/postgresql/14.1
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 3.16.0
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/d/perl-modules/CPAN/DBD-Pg/DBD-Pg-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/DBD-Pg-$(version)
+src_dir_name = DBD-Pg-$(version)
+doc_dir_name = perl-dbd-pg-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = dev
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+PERL_PKG_NAME = perl-dbd-pg
+PERL_PKG_VERSION = 3.16.0
+PERL_PKG_ARCH = $(TOOLCHAIN)
+PERL_PKG_DISTRO_NAME = $(DISTRO_NAME)
+PERL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+PERL_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+PERL_PKG_SHORT_DESCRIPTION = Perl interface to Postgres using DBI
+PERL_PKG_URL = $(BUG_URL)
+PERL_PKG_LICENSE = GPLv2
+PERL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-description
+PERL_PKG_DESCRIPTION_FILE_IN = $(PERL_PKG_NAME)-pkg-description.in
+PERL_PKG_INSTALL_SCRIPT = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-install.sh
+PERL_PKG_INSTALL_SCRIPT_IN = $(PERL_PKG_NAME)-pkg-install.sh.in
+
+PERL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-package
+
+pkg_basename = $(PERL_PKG_NAME)-$(PERL_PKG_VERSION)-$(PERL_PKG_ARCH)-$(PERL_PKG_DISTRO_NAME)-$(PERL_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(PERL_PKG)
+
+
+#
+# Common Perl5 Environment:
+# ========================
+#
+perl_environment = INSTALLDIRS=vendor
+
+perl_environment += PERL_LIB='$(TARGET_DEST_DIR)/usr/share/perl5'
+perl_environment += PERL_ARCHLIB='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5'
+perl_environment += PERL_INC='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += PERL_INCDEP='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+
+perl_environment += SITELIBEXP='/usr/share/perl5/site_perl'
+perl_environment += SITEARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+perl_environment += VENDORLIBEXP='/usr/share/perl5/vendor_perl'
+perl_environment += VENDORARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += PERLPREFIX='/usr'
+perl_environment += INSTALLPRIVLIB='/usr/share/perl5'
+perl_environment += INSTALLARCHLIB='/usr/lib$(LIBSUFFIX)/perl5'
+
+perl_environment += SITEPREFIX='/usr'
+perl_environment += INSTALLSITELIB='/usr/share/perl5/site_perl'
+perl_environment += INSTALLSITEARCH='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+
+perl_environment += VENDORPREFIX='/usr'
+perl_environment += INSTALLVENDORLIB='/usr/share/perl5/vendor_perl'
+perl_environment += INSTALLVENDORARCH='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += INSTALLBIN='/usr/bin'
+perl_environment += INSTALLSITEBIN='/usr/bin'
+perl_environment += INSTALLVENDORBIN='/usr/bin'
+
+perl_environment += INSTALLSCRIPT='/usr/bin'
+perl_environment += INSTALLSITESCRIPT='/usr/bin'
+perl_environment += INSTALLVENDORSCRIPT='/usr/bin'
+
+perl_environment += INSTALLMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLSITEMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLVENDORMAN1DIR='/usr/share/man/man1'
+
+perl_environment += INSTALLMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLSITEMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLVENDORMAN3DIR='/usr/share/man/man3'
+
+#
+# HW Specific Perl5 Environment:
+# =============================
+#
+suppress-warnings = -Wno-unused-function -Wno-unused-parameter -Wno-incompatible-pointer-types
+
+POSTGRES_VERSION = 14.1
+POSTGRES_INT_VERSION = 140100
+POSTGRES_PORT = 5432
+
+pg-defines = -DPGLIBVERSION=$(POSTGRES_INT_VERSION) -DPGDEFPORT=$(POSTGRES_PORT)
+
+perl_environment += AR=$(AR)
+perl_environment += RANLIB=$(RANLIB)
+perl_environment += CC='$(CC) --sysroot=$(TARGET_DEST_DIR) $(ARCH_OPTIMIZATION) $(ARCH_FLAGS) $(ARCH_DEFS)'
+perl_environment += LD='$(CC) --sysroot=$(TARGET_DEST_DIR) -shared'
+perl_environment += LDFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCFLAGS='$(CFLAGS) -I$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE $(pg-defines) $(suppress-warnings)'
+perl_environment += LDDLFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCCDLFLAGS='-fPIC'
+perl_environment += CCDLFLAGS='-Wl,-E -Wl,-rpath,/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += FULL_AR=$(AR)
+perl_environment += OSNAME=linux
+perl_environment += OSVERS=
+perl_environment += LIBC=
+
+pg_env = POSTGRES_HOME='$(TARGET_DEST_DIR)/usr'
+pg_env += POSTGRES_INCLUDE='$(TARGET_DEST_DIR)/usr/include'
+pg_env += POSTGRES_LIB='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX) -lssl'
+pg_env += POSTGRES_VERSION=$(POSTGRES_VERSION)
+pg_env += POSTGRES_INT_VERSION=$(POSTGRES_INT_VERSION)
+pg_env += POSTGRES_PORT=$(POSTGRES_PORT)
+
+#
+# Give the path of target machine PERL headers to the ExtUtils::MakeMaker for creating
+# the PERL_HDRS list in the resulting Makefile created by `perl Makefile.PL` command.
+#
+# see: _perl_header_files() fuction in the MM_Any.pm script to understand PERL_SRC env.
+#
+perl_src_hdrs = PERL_SRC=$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE
+
+#
+# Module Specific Perl5 Environment:
+# =================================
+#
+
+perl_local_pod = usr/lib$(LIBSUFFIX)/perl5/perllocal.pod
+
+
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(perl_src_hdrs) $(pg_env) $(PERL) Makefile.PL $(perl_environment) ; \
+ )
+ # ======= build the perl-dbd-pg module =======
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) $(perl_environment) ; \
+ )
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(PERL_PKG)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(perl_environment) $(env_sysroot) ; \
+ )
+ @find $(PERL_PKG) -name '.packlist' -delete
+ @rm -f $(PERL_PKG)/$(perl_local_pod)
+ @chmod 755 $(PERL_PKG)/usr/lib$(LIBSUFFIX)/perl5/vendor_perl/auto/DBD/Pg/Pg.so
+ # ======= Install Documentation =======
+ @if [ -d $(PERL_PKG)/usr/share/man ]; then \
+ ( cd $(PERL_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(SRC_DIR)/LICENSES \
+ $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a LICENSES README README.dev TODO \
+ $(PERL_PKG)/usr/share/doc/$(doc_dir_name) \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r Changes ]; then \
+ DOCSDIR=`echo $(PERL_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat Changes | head -n 1000 > $$DOCSDIR/Changes ; \
+ touch -r Changes $$DOCSDIR/Changes ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(PERL_PKG))
+ # ======= Strip binaries =======
+ @( cd $(PERL_PKG) ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(PERL_PKG)/usr/lib$(LIBSUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(PERL_PKG_DESCRIPTION_FILE): $(PERL_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(PERL_PKG_INSTALL_SCRIPT): $(PERL_PKG_INSTALL_SCRIPT_IN)
+ @cat $< | $(SED) -e "s,@PERL_LOCAL_POD@,$(perl_local_pod),g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG_INSTALL_SCRIPT)
+ @cp $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG)/.DESCRIPTION
+ @cp $(PERL_PKG_INSTALL_SCRIPT) $(PERL_PKG)/.INSTALL
+ @chmod a+x $(PERL_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(PERL_PKG)/.REQUIRES
+ @echo "pkgname=$(PERL_PKG_NAME)" > $(PERL_PKG)/.PKGINFO ; \
+ echo "pkgver=$(PERL_PKG_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "arch=$(PERL_PKG_ARCH)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distroname=$(PERL_PKG_DISTRO_NAME)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distrover=$(PERL_PKG_DISTRO_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "group=$(PERL_PKG_GROUP)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(PERL_PKG_SHORT_DESCRIPTION)\"" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "url=$(PERL_PKG_URL)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "license=$(PERL_PKG_LICENSE)" >> $(PERL_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(PERL_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: perl-dbd-pg/3.16.0/PATCHES
===================================================================
--- perl-dbd-pg/3.16.0/PATCHES (nonexistent)
+++ perl-dbd-pg/3.16.0/PATCHES (revision 5)
@@ -0,0 +1,2 @@
+
+../../../../sources/packages/d/perl-modules/CPAN/DBD-Pg/patches/DBD-Pg-3.16.0-cross.patch -p0
Index: perl-dbd-pg/3.16.0/perl-dbd-pg-pkg-description.in
===================================================================
--- perl-dbd-pg/3.16.0/perl-dbd-pg-pkg-description.in (nonexistent)
+++ perl-dbd-pg/3.16.0/perl-dbd-pg-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+perl-dbd-pg: perl-dbd-pg @VERSION@ (Perl interface to Postgres using DBI)
+perl-dbd-pg:
+perl-dbd-pg: This is the Perl DBI driver for access to Postgres databases.
+perl-dbd-pg:
+perl-dbd-pg:
+perl-dbd-pg:
+perl-dbd-pg:
+perl-dbd-pg:
+perl-dbd-pg:
+perl-dbd-pg:
+perl-dbd-pg:
Index: perl-dbd-pg/3.16.0/perl-dbd-pg-pkg-install.sh.in
===================================================================
--- perl-dbd-pg/3.16.0/perl-dbd-pg-pkg-install.sh.in (nonexistent)
+++ perl-dbd-pg/3.16.0/perl-dbd-pg-pkg-install.sh.in (revision 5)
@@ -0,0 +1,64 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ if ! grep "DBD::mysql|" @PERL_LOCAL_POD@ 1> /dev/null 2> /dev/null ; then
+ cat << EOF >> @PERL_LOCAL_POD@
+=head2 Sun Jan 16 01:40:57 2022: C<Module> L<DBD::Pg|DBD::Pg>
+
+=over 4
+
+=item *
+
+C<installed into: /usr/share/perl5/vendor_perl>
+
+=item *
+
+C<LINKTYPE: dynamic>
+
+=item *
+
+C<VERSION: 3.16.0>
+
+=item *
+
+C<EXE_FILES: >
+
+=back
+
+EOF
+ fi
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: perl-dbd-pg/3.16.0/perl-dbd-pg-pkg-install.sh.in
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: perl-dbd-pg/3.16.0
===================================================================
--- perl-dbd-pg/3.16.0 (nonexistent)
+++ perl-dbd-pg/3.16.0 (revision 5)
Property changes on: perl-dbd-pg/3.16.0
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-dbd-pg
===================================================================
--- perl-dbd-pg (nonexistent)
+++ perl-dbd-pg (revision 5)
Property changes on: perl-dbd-pg
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-dbi/1.643/Makefile
===================================================================
--- perl-dbi/1.643/Makefile (nonexistent)
+++ perl-dbi/1.643/Makefile (revision 5)
@@ -0,0 +1,293 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/d/perl-modules/CPAN/DBI
+
+REQUIRES = dev/perl/5.36.0
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 1.643
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/d/perl-modules/CPAN/DBI/DBI-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/DBI-$(version)
+src_dir_name = DBI-$(version)
+doc_dir_name = perl-dbi-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = dev
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+PERL_PKG_NAME = perl-dbi
+PERL_PKG_VERSION = 1.643
+PERL_PKG_ARCH = $(TOOLCHAIN)
+PERL_PKG_DISTRO_NAME = $(DISTRO_NAME)
+PERL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+PERL_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+PERL_PKG_SHORT_DESCRIPTION = DBI
+PERL_PKG_URL = $(BUG_URL)
+PERL_PKG_LICENSE = Artistic-v1.0
+PERL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-description
+PERL_PKG_DESCRIPTION_FILE_IN = $(PERL_PKG_NAME)-pkg-description.in
+PERL_PKG_INSTALL_SCRIPT = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-install.sh
+PERL_PKG_INSTALL_SCRIPT_IN = $(PERL_PKG_NAME)-pkg-install.sh.in
+
+PERL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-package
+
+pkg_basename = $(PERL_PKG_NAME)-$(PERL_PKG_VERSION)-$(PERL_PKG_ARCH)-$(PERL_PKG_DISTRO_NAME)-$(PERL_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(PERL_PKG)
+
+
+#
+# Common Perl5 Environment:
+# ========================
+#
+perl_environment = INSTALLDIRS=vendor
+
+perl_environment += PERL_LIB='$(TARGET_DEST_DIR)/usr/share/perl5'
+perl_environment += PERL_ARCHLIB='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5'
+perl_environment += PERL_INC='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += PERL_INCDEP='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+
+perl_environment += SITELIBEXP='/usr/share/perl5/site_perl'
+perl_environment += SITEARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+perl_environment += VENDORLIBEXP='/usr/share/perl5/vendor_perl'
+perl_environment += VENDORARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += PERLPREFIX='/usr'
+perl_environment += INSTALLPRIVLIB='/usr/share/perl5'
+perl_environment += INSTALLARCHLIB='/usr/lib$(LIBSUFFIX)/perl5'
+
+perl_environment += SITEPREFIX='/usr'
+perl_environment += INSTALLSITELIB='/usr/share/perl5/site_perl'
+perl_environment += INSTALLSITEARCH='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+
+perl_environment += VENDORPREFIX='/usr'
+perl_environment += INSTALLVENDORLIB='/usr/share/perl5/vendor_perl'
+perl_environment += INSTALLVENDORARCH='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += INSTALLBIN='/usr/bin'
+perl_environment += INSTALLSITEBIN='/usr/bin'
+perl_environment += INSTALLVENDORBIN='/usr/bin'
+
+perl_environment += INSTALLSCRIPT='/usr/bin'
+perl_environment += INSTALLSITESCRIPT='/usr/bin'
+perl_environment += INSTALLVENDORSCRIPT='/usr/bin'
+
+perl_environment += INSTALLMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLSITEMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLVENDORMAN1DIR='/usr/share/man/man1'
+
+perl_environment += INSTALLMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLSITEMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLVENDORMAN3DIR='/usr/share/man/man3'
+
+#
+# HW Specific Perl5 Environment:
+# =============================
+#
+suppress-warnings = -Wno-unused-function -Wno-unused-parameter
+
+perl_environment += AR=$(AR)
+perl_environment += RANLIB=$(RANLIB)
+perl_environment += CC='$(CC) --sysroot=$(TARGET_DEST_DIR) $(ARCH_OPTIMIZATION) $(ARCH_FLAGS) $(ARCH_DEFS)'
+perl_environment += LD='$(CC) --sysroot=$(TARGET_DEST_DIR) -shared'
+perl_environment += LDFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCFLAGS='$(CFLAGS) -I$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE $(suppress-warnings)'
+perl_environment += LDDLFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCCDLFLAGS='-fPIC'
+perl_environment += CCDLFLAGS='-Wl,-E -Wl,-rpath,/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += FULL_AR=$(AR)
+perl_environment += OSNAME=linux
+perl_environment += OSVERS=
+perl_environment += LIBC=
+
+#
+# Give the path of target machine PERL headers to the ExtUtils::MakeMaker for creating
+# the PERL_HDRS list in the resulting Makefile created by `perl Makefile.PL` command.
+#
+# see: _perl_header_files() fuction in the MM_Any.pm script to understand PERL_SRC env.
+#
+perl_src_hdrs = PERL_SRC=$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE
+perl_src_hdrs += LANG=
+
+#
+# Module Specific Perl5 Environment:
+# =================================
+#
+
+perl_local_pod = usr/lib$(LIBSUFFIX)/perl5/perllocal.pod
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(perl_src_hdrs) $(PERL) Makefile.PL $(perl_environment) ; \
+ )
+ # ======= build the perl-dbi module =======
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) $(perl_environment) ; \
+ )
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(PERL_PKG)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(perl_environment) $(env_sysroot) ; \
+ )
+ @( cd $(PERL_PKG)/usr/bin ; \
+ sed -i 's,$(BUILDSYSTEM),,' dbilogstrip dbiprof dbiproxy ; \
+ )
+ @find $(PERL_PKG) -name '.packlist' -delete
+ @rm -f $(PERL_PKG)/$(perl_local_pod)
+ @chmod 755 $(PERL_PKG)/usr/lib$(LIBSUFFIX)/perl5/vendor_perl/auto/DBI/DBI.so
+ # ======= Install Documentation =======
+ @if [ -d $(PERL_PKG)/usr/share/man ]; then \
+ ( cd $(PERL_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(SRC_DIR)/LICENSE \
+ $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a INSTALL LICENSE README.md \
+ $(PERL_PKG)/usr/share/doc/$(doc_dir_name) \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r Changes ]; then \
+ DOCSDIR=`echo $(PERL_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat Changes | head -n 1000 > $$DOCSDIR/Changes ; \
+ touch -r Changes $$DOCSDIR/Changes ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(PERL_PKG))
+ # ======= Strip binaries =======
+ @( cd $(PERL_PKG) ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ @touch $@
+
+$(PERL_PKG_DESCRIPTION_FILE): $(PERL_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(PERL_PKG_INSTALL_SCRIPT): $(PERL_PKG_INSTALL_SCRIPT_IN)
+ @cat $< | $(SED) -e "s,@PERL_LOCAL_POD@,$(perl_local_pod),g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG_INSTALL_SCRIPT)
+ @cp $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG)/.DESCRIPTION
+ @cp $(PERL_PKG_INSTALL_SCRIPT) $(PERL_PKG)/.INSTALL
+ @chmod a+x $(PERL_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(PERL_PKG)/.REQUIRES
+ @echo "pkgname=$(PERL_PKG_NAME)" > $(PERL_PKG)/.PKGINFO ; \
+ echo "pkgver=$(PERL_PKG_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "arch=$(PERL_PKG_ARCH)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distroname=$(PERL_PKG_DISTRO_NAME)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distrover=$(PERL_PKG_DISTRO_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "group=$(PERL_PKG_GROUP)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(PERL_PKG_SHORT_DESCRIPTION)\"" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "url=$(PERL_PKG_URL)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "license=$(PERL_PKG_LICENSE)" >> $(PERL_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(PERL_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: perl-dbi/1.643/PATCHES
===================================================================
Index: perl-dbi/1.643/perl-dbi-pkg-description.in
===================================================================
--- perl-dbi/1.643/perl-dbi-pkg-description.in (nonexistent)
+++ perl-dbi/1.643/perl-dbi-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+perl-dbi: perl-dbi @VERSION@ (DBI)
+perl-dbi:
+perl-dbi: DBI - The Perl Database Interface.
+perl-dbi:
+perl-dbi: The DBI requires one or more 'driver' modules to talk to databases,
+perl-dbi: but they are not needed to build or install the DBI.
+perl-dbi:
+perl-dbi: Check that a DBD::* module exists for the database you wish to use.
+perl-dbi:
+perl-dbi:
+perl-dbi:
Index: perl-dbi/1.643/perl-dbi-pkg-install.sh.in
===================================================================
--- perl-dbi/1.643/perl-dbi-pkg-install.sh.in (nonexistent)
+++ perl-dbi/1.643/perl-dbi-pkg-install.sh.in (revision 5)
@@ -0,0 +1,64 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ if ! grep "DBI|" @PERL_LOCAL_POD@ 1> /dev/null 2> /dev/null ; then
+ cat << EOF >> @PERL_LOCAL_POD@
+=head2 Sat Jan 15 19:33:48 2022: C<Module> L<DBI|DBI>
+
+=over 4
+
+=item *
+
+C<installed into: /usr/share/perl5/vendor_perl>
+
+=item *
+
+C<LINKTYPE: dynamic>
+
+=item *
+
+C<VERSION: 1.643>
+
+=item *
+
+C<EXE_FILES: dbilogstrip dbiprof dbiproxy>
+
+=back
+
+EOF
+ fi
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: perl-dbi/1.643/perl-dbi-pkg-install.sh.in
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: perl-dbi/1.643
===================================================================
--- perl-dbi/1.643 (nonexistent)
+++ perl-dbi/1.643 (revision 5)
Property changes on: perl-dbi/1.643
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-dbi
===================================================================
--- perl-dbi (nonexistent)
+++ perl-dbi (revision 5)
Property changes on: perl-dbi
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-devel-checklib/1.16/Makefile
===================================================================
--- perl-devel-checklib/1.16/Makefile (nonexistent)
+++ perl-devel-checklib/1.16/Makefile (revision 5)
@@ -0,0 +1,287 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/d/perl-modules/CPAN/Devel-CheckLib
+
+REQUIRES = dev/perl/5.36.0
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 1.16
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/d/perl-modules/CPAN/Devel-CheckLib/Devel-CheckLib-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/Devel-CheckLib-$(version)
+src_dir_name = Devel-CheckLib-$(version)
+doc_dir_name = perl-devel-checklib-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = dev
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+PERL_PKG_NAME = perl-devel-checklib
+PERL_PKG_VERSION = 1.16
+PERL_PKG_ARCH = $(TOOLCHAIN)
+PERL_PKG_DISTRO_NAME = $(DISTRO_NAME)
+PERL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+PERL_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+PERL_PKG_SHORT_DESCRIPTION = check that a library is available
+PERL_PKG_URL = $(BUG_URL)
+PERL_PKG_LICENSE = Artistic-v1.0
+PERL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-description
+PERL_PKG_DESCRIPTION_FILE_IN = $(PERL_PKG_NAME)-pkg-description.in
+PERL_PKG_INSTALL_SCRIPT = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-install.sh
+PERL_PKG_INSTALL_SCRIPT_IN = $(PERL_PKG_NAME)-pkg-install.sh.in
+
+PERL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-package
+
+pkg_basename = $(PERL_PKG_NAME)-$(PERL_PKG_VERSION)-$(PERL_PKG_ARCH)-$(PERL_PKG_DISTRO_NAME)-$(PERL_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(PERL_PKG)
+
+
+#
+# Common Perl5 Environment:
+# ========================
+#
+perl_environment = INSTALLDIRS=vendor
+
+perl_environment += PERL_LIB='$(TARGET_DEST_DIR)/usr/share/perl5'
+perl_environment += PERL_ARCHLIB='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5'
+perl_environment += PERL_INC='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += PERL_INCDEP='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+
+perl_environment += SITELIBEXP='/usr/share/perl5/site_perl'
+perl_environment += SITEARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+perl_environment += VENDORLIBEXP='/usr/share/perl5/vendor_perl'
+perl_environment += VENDORARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += PERLPREFIX='/usr'
+perl_environment += INSTALLPRIVLIB='/usr/share/perl5'
+perl_environment += INSTALLARCHLIB='/usr/lib$(LIBSUFFIX)/perl5'
+
+perl_environment += SITEPREFIX='/usr'
+perl_environment += INSTALLSITELIB='/usr/share/perl5/site_perl'
+perl_environment += INSTALLSITEARCH='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+
+perl_environment += VENDORPREFIX='/usr'
+perl_environment += INSTALLVENDORLIB='/usr/share/perl5/vendor_perl'
+perl_environment += INSTALLVENDORARCH='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += INSTALLBIN='/usr/bin'
+perl_environment += INSTALLSITEBIN='/usr/bin'
+perl_environment += INSTALLVENDORBIN='/usr/bin'
+
+perl_environment += INSTALLSCRIPT='/usr/bin'
+perl_environment += INSTALLSITESCRIPT='/usr/bin'
+perl_environment += INSTALLVENDORSCRIPT='/usr/bin'
+
+perl_environment += INSTALLMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLSITEMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLVENDORMAN1DIR='/usr/share/man/man1'
+
+perl_environment += INSTALLMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLSITEMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLVENDORMAN3DIR='/usr/share/man/man3'
+
+#
+# HW Specific Perl5 Environment:
+# =============================
+#
+suppress-warnings = -Wno-unused-function -Wno-unused-parameter
+
+perl_environment += AR=$(AR)
+perl_environment += RANLIB=$(RANLIB)
+perl_environment += CC='$(CC) --sysroot=$(TARGET_DEST_DIR) $(ARCH_OPTIMIZATION) $(ARCH_FLAGS) $(ARCH_DEFS)'
+perl_environment += LD='$(CC) --sysroot=$(TARGET_DEST_DIR) -shared'
+perl_environment += LDFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCFLAGS='$(CFLAGS) -I$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE $(suppress-warnings)'
+perl_environment += LDDLFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCCDLFLAGS='-fPIC'
+perl_environment += CCDLFLAGS='-Wl,-E -Wl,-rpath,/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += FULL_AR=$(AR)
+perl_environment += OSNAME=linux
+perl_environment += OSVERS=
+perl_environment += LIBC=
+
+#
+# Give the path of target machine PERL headers to the ExtUtils::MakeMaker for creating
+# the PERL_HDRS list in the resulting Makefile created by `perl Makefile.PL` command.
+#
+# see: _perl_header_files() fuction in the MM_Any.pm script to understand PERL_SRC env.
+#
+perl_src_hdrs = PERL_SRC=$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE
+
+#
+# Module Specific Perl5 Environment:
+# =================================
+#
+
+perl_local_pod = usr/lib$(LIBSUFFIX)/perl5/perllocal.pod
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(perl_src_hdrs) $(PERL) Makefile.PL $(perl_environment) ; \
+ )
+ # ======= build the perl-devel-checklib module =======
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) $(perl_environment) ; \
+ )
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(PERL_PKG)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(perl_environment) $(env_sysroot) ; \
+ )
+ @( cd $(PERL_PKG)/usr/bin ; \
+ sed -i 's,$(BUILDSYSTEM),,' use-devel-checklib ; \
+ )
+ @find $(PERL_PKG) -name '.packlist' -delete
+ @rm -f $(PERL_PKG)/$(perl_local_pod)
+ # ======= Install Documentation =======
+ @if [ -d $(PERL_PKG)/usr/share/man ]; then \
+ ( cd $(PERL_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(CURDIR)/copying/LICENSE $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @cp -a $(CURDIR)/copying/LICENSE $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a README TODO \
+ $(PERL_PKG)/usr/share/doc/$(doc_dir_name) \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r CHANGES ]; then \
+ DOCSDIR=`echo $(PERL_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat CHANGES | head -n 1000 > $$DOCSDIR/CHANGES ; \
+ touch -r CHANGES $$DOCSDIR/CHANGES ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(PERL_PKG))
+ @touch $@
+
+$(PERL_PKG_DESCRIPTION_FILE): $(PERL_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(PERL_PKG_INSTALL_SCRIPT): $(PERL_PKG_INSTALL_SCRIPT_IN)
+ @cat $< | $(SED) -e "s,@PERL_LOCAL_POD@,$(perl_local_pod),g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG_INSTALL_SCRIPT)
+ @cp $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG)/.DESCRIPTION
+ @cp $(PERL_PKG_INSTALL_SCRIPT) $(PERL_PKG)/.INSTALL
+ @chmod a+x $(PERL_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(PERL_PKG)/.REQUIRES
+ @echo "pkgname=$(PERL_PKG_NAME)" > $(PERL_PKG)/.PKGINFO ; \
+ echo "pkgver=$(PERL_PKG_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "arch=$(PERL_PKG_ARCH)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distroname=$(PERL_PKG_DISTRO_NAME)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distrover=$(PERL_PKG_DISTRO_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "group=$(PERL_PKG_GROUP)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(PERL_PKG_SHORT_DESCRIPTION)\"" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "url=$(PERL_PKG_URL)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "license=$(PERL_PKG_LICENSE)" >> $(PERL_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(PERL_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: perl-devel-checklib/1.16/PATCHES
===================================================================
Index: perl-devel-checklib/1.16/copying/LICENSE
===================================================================
--- perl-devel-checklib/1.16/copying/LICENSE (nonexistent)
+++ perl-devel-checklib/1.16/copying/LICENSE (revision 5)
@@ -0,0 +1,5 @@
+
+Copyright 2007 David Cantrell. Portions copyright 2007 David Golden.
+
+This module is free-as-in-speech software, and may be used, distributed,
+and modified under the same conditions as perl itself.
Index: perl-devel-checklib/1.16/copying
===================================================================
--- perl-devel-checklib/1.16/copying (nonexistent)
+++ perl-devel-checklib/1.16/copying (revision 5)
Property changes on: perl-devel-checklib/1.16/copying
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-devel-checklib/1.16/perl-devel-checklib-pkg-description.in
===================================================================
--- perl-devel-checklib/1.16/perl-devel-checklib-pkg-description.in (nonexistent)
+++ perl-devel-checklib/1.16/perl-devel-checklib-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+perl-devel-checklib: perl-devel-checklib @VERSION@ (check that a library is available)
+perl-devel-checklib:
+perl-devel-checklib: Devel::CheckLib is a perl module that checks whether a particular
+perl-devel-checklib: C library and its headers are available.
+perl-devel-checklib:
+perl-devel-checklib:
+perl-devel-checklib:
+perl-devel-checklib:
+perl-devel-checklib:
+perl-devel-checklib:
+perl-devel-checklib:
Index: perl-devel-checklib/1.16/perl-devel-checklib-pkg-install.sh.in
===================================================================
--- perl-devel-checklib/1.16/perl-devel-checklib-pkg-install.sh.in (nonexistent)
+++ perl-devel-checklib/1.16/perl-devel-checklib-pkg-install.sh.in (revision 5)
@@ -0,0 +1,64 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ if ! grep "DBD::mysql|" @PERL_LOCAL_POD@ 1> /dev/null 2> /dev/null ; then
+ cat << EOF >> @PERL_LOCAL_POD@
+=head2 Sat Jan 15 22:12:45 2022: C<Module> L<Devel::CheckLib|Devel::CheckLib>
+
+=over 4
+
+=item *
+
+C<installed into: /usr/share/perl5/vendor_perl>
+
+=item *
+
+C<LINKTYPE: dynamic>
+
+=item *
+
+C<VERSION: 1.16>
+
+=item *
+
+C<EXE_FILES: bin/use-devel-checklib>
+
+=back
+
+EOF
+ fi
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: perl-devel-checklib/1.16/perl-devel-checklib-pkg-install.sh.in
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: perl-devel-checklib/1.16
===================================================================
--- perl-devel-checklib/1.16 (nonexistent)
+++ perl-devel-checklib/1.16 (revision 5)
Property changes on: perl-devel-checklib/1.16
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-devel-checklib
===================================================================
--- perl-devel-checklib (nonexistent)
+++ perl-devel-checklib (revision 5)
Property changes on: perl-devel-checklib
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-error/0.17029/Makefile
===================================================================
--- perl-error/0.17029/Makefile (nonexistent)
+++ perl-error/0.17029/Makefile (revision 5)
@@ -0,0 +1,291 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/d/perl-modules/CPAN/Error
+
+REQUIRES = dev/perl/5.36.0
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 0.17029
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/d/perl-modules/CPAN/Error/Error-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/Error-$(version)
+src_dir_name = Error-$(version)
+doc_dir_name = perl-error-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = dev
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+PERL_PKG_NAME = perl-error
+PERL_PKG_VERSION = 0.17029
+PERL_PKG_ARCH = $(TOOLCHAIN)
+PERL_PKG_DISTRO_NAME = $(DISTRO_NAME)
+PERL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+PERL_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+PERL_PKG_SHORT_DESCRIPTION = Error/exception handling in an OO-ish way
+PERL_PKG_URL = $(BUG_URL)
+PERL_PKG_LICENSE = GPLv2
+PERL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-description
+PERL_PKG_DESCRIPTION_FILE_IN = $(PERL_PKG_NAME)-pkg-description.in
+PERL_PKG_INSTALL_SCRIPT = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-install.sh
+PERL_PKG_INSTALL_SCRIPT_IN = $(PERL_PKG_NAME)-pkg-install.sh.in
+
+PERL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-package
+
+pkg_basename = $(PERL_PKG_NAME)-$(PERL_PKG_VERSION)-$(PERL_PKG_ARCH)-$(PERL_PKG_DISTRO_NAME)-$(PERL_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(PERL_PKG)
+
+
+#
+# Common Perl5 Environment:
+# ========================
+#
+perl_environment = INSTALLDIRS=vendor
+
+perl_environment += PERL_LIB='$(TARGET_DEST_DIR)/usr/share/perl5'
+perl_environment += PERL_ARCHLIB='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5'
+perl_environment += PERL_INC='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += PERL_INCDEP='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+
+perl_environment += SITELIBEXP='/usr/share/perl5/site_perl'
+perl_environment += SITEARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+perl_environment += VENDORLIBEXP='/usr/share/perl5/vendor_perl'
+perl_environment += VENDORARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += PERLPREFIX='/usr'
+perl_environment += INSTALLPRIVLIB='/usr/share/perl5'
+perl_environment += INSTALLARCHLIB='/usr/lib$(LIBSUFFIX)/perl5'
+
+perl_environment += SITEPREFIX='/usr'
+perl_environment += INSTALLSITELIB='/usr/share/perl5/site_perl'
+perl_environment += INSTALLSITEARCH='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+
+perl_environment += VENDORPREFIX='/usr'
+perl_environment += INSTALLVENDORLIB='/usr/share/perl5/vendor_perl'
+perl_environment += INSTALLVENDORARCH='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += INSTALLBIN='/usr/bin'
+perl_environment += INSTALLSITEBIN='/usr/bin'
+perl_environment += INSTALLVENDORBIN='/usr/bin'
+
+perl_environment += INSTALLSCRIPT='/usr/bin'
+perl_environment += INSTALLSITESCRIPT='/usr/bin'
+perl_environment += INSTALLVENDORSCRIPT='/usr/bin'
+
+perl_environment += INSTALLMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLSITEMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLVENDORMAN1DIR='/usr/share/man/man1'
+
+perl_environment += INSTALLMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLSITEMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLVENDORMAN3DIR='/usr/share/man/man3'
+
+#
+# HW Specific Perl5 Environment:
+# =============================
+#
+suppress-warnings = -Wno-unused-function -Wno-unused-parameter
+
+perl_environment += AR=$(AR)
+perl_environment += RANLIB=$(RANLIB)
+perl_environment += CC='$(CC) --sysroot=$(TARGET_DEST_DIR) $(ARCH_OPTIMIZATION) $(ARCH_FLAGS) $(ARCH_DEFS)'
+perl_environment += LD='$(CC) --sysroot=$(TARGET_DEST_DIR) -shared'
+perl_environment += LDFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCFLAGS='$(CFLAGS) -I$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE $(suppress-warnings)'
+perl_environment += LDDLFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCCDLFLAGS='-fPIC'
+perl_environment += CCDLFLAGS='-Wl,-E -Wl,-rpath,/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += FULL_AR=$(AR)
+perl_environment += OSNAME=linux
+perl_environment += OSVERS=
+perl_environment += LIBC=
+
+#
+# Give the path of target machine PERL headers to the ExtUtils::MakeMaker for creating
+# the PERL_HDRS list in the resulting Makefile created by `perl Makefile.PL` command.
+#
+# see: _perl_header_files() fuction in the MM_Any.pm script to understand PERL_SRC env.
+#
+perl_src_hdrs = PERL_SRC=$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE
+
+#
+# Module Specific Perl5 Environment:
+# =================================
+#
+
+perl_local_pod = usr/lib$(LIBSUFFIX)/perl5/perllocal.pod
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(perl_src_hdrs) $(PERL) Makefile.PL $(perl_environment) ; \
+ )
+ # ======= build the perl-error module =======
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) $(perl_environment) ; \
+ )
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(PERL_PKG)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(perl_environment) $(env_sysroot) ; \
+ )
+ @find $(PERL_PKG) -name '.packlist' -delete
+ @rm -f $(PERL_PKG)/$(perl_local_pod)
+ # ======= Install Documentation =======
+ @if [ -d $(PERL_PKG)/usr/share/man ]; then \
+ ( cd $(PERL_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(SRC_DIR)/LICENSE \
+ $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a examples LICENSE README \
+ $(PERL_PKG)/usr/share/doc/$(doc_dir_name) \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r Changes ]; then \
+ DOCSDIR=`echo $(PERL_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat Changes | head -n 1000 > $$DOCSDIR/Changes ; \
+ touch -r Changes $$DOCSDIR/Changes ; \
+ fi \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r ChangeLog ]; then \
+ DOCSDIR=`echo $(PERL_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat ChangeLog | head -n 1000 > $$DOCSDIR/ChangeLog ; \
+ touch -r ChangeLog $$DOCSDIR/ChangeLog ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(PERL_PKG))
+ @touch $@
+
+$(PERL_PKG_DESCRIPTION_FILE): $(PERL_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(PERL_PKG_INSTALL_SCRIPT): $(PERL_PKG_INSTALL_SCRIPT_IN)
+ @cat $< | $(SED) -e "s,@PERL_LOCAL_POD@,$(perl_local_pod),g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG_INSTALL_SCRIPT)
+ @cp $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG)/.DESCRIPTION
+ @cp $(PERL_PKG_INSTALL_SCRIPT) $(PERL_PKG)/.INSTALL
+ @chmod a+x $(PERL_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(PERL_PKG)/.REQUIRES
+ @echo "pkgname=$(PERL_PKG_NAME)" > $(PERL_PKG)/.PKGINFO ; \
+ echo "pkgver=$(PERL_PKG_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "arch=$(PERL_PKG_ARCH)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distroname=$(PERL_PKG_DISTRO_NAME)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distrover=$(PERL_PKG_DISTRO_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "group=$(PERL_PKG_GROUP)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(PERL_PKG_SHORT_DESCRIPTION)\"" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "url=$(PERL_PKG_URL)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "license=$(PERL_PKG_LICENSE)" >> $(PERL_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(PERL_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: perl-error/0.17029/PATCHES
===================================================================
Index: perl-error/0.17029/perl-error-pkg-description.in
===================================================================
--- perl-error/0.17029/perl-error-pkg-description.in (nonexistent)
+++ perl-error/0.17029/perl-error-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+perl-error: perl-error @VERSION@ (Error/exception handling in an OO-ish way)
+perl-error:
+perl-error: The Error package provides two interfaces. Firstly Error provides
+perl-error: a procedural interface to exception handling. Secondly Error is a
+perl-error: base class for errors/exceptions that can either be thrown, for
+perl-error: subsequent catch, or can simply be recorded.
+perl-error:
+perl-error:
+perl-error:
+perl-error:
+perl-error:
Index: perl-error/0.17029/perl-error-pkg-install.sh.in
===================================================================
--- perl-error/0.17029/perl-error-pkg-install.sh.in (nonexistent)
+++ perl-error/0.17029/perl-error-pkg-install.sh.in (revision 5)
@@ -0,0 +1,64 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ if ! grep "DBI|" @PERL_LOCAL_POD@ 1> /dev/null 2> /dev/null ; then
+ cat << EOF >> @PERL_LOCAL_POD@
+=head2 Sun Jan 16 16:17:15 2022: C<Module> L<Error|Error>
+
+=over 4
+
+=item *
+
+C<installed into: /usr/share/perl5/vendor_perl>
+
+=item *
+
+C<LINKTYPE: dynamic>
+
+=item *
+
+C<VERSION: 0.17029>
+
+=item *
+
+C<EXE_FILES: >
+
+=back
+
+EOF
+ fi
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: perl-error/0.17029/perl-error-pkg-install.sh.in
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: perl-error/0.17029
===================================================================
--- perl-error/0.17029 (nonexistent)
+++ perl-error/0.17029 (revision 5)
Property changes on: perl-error/0.17029
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-error
===================================================================
--- perl-error (nonexistent)
+++ perl-error (revision 5)
Property changes on: perl-error
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-io-handle/1.50/Makefile
===================================================================
--- perl-io-handle/1.50/Makefile (nonexistent)
+++ perl-io-handle/1.50/Makefile (revision 5)
@@ -0,0 +1,292 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/d/perl-modules/CPAN/IO
+
+REQUIRES = dev/perl/5.36.0
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 1.50
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/d/perl-modules/CPAN/IO/IO-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/IO-$(version)
+src_dir_name = IO-$(version)
+doc_dir_name = perl-io-handle-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = dev
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+PERL_PKG_NAME = perl-io-handle
+PERL_PKG_VERSION = 1.50
+PERL_PKG_ARCH = $(TOOLCHAIN)
+PERL_PKG_DISTRO_NAME = $(DISTRO_NAME)
+PERL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+PERL_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+PERL_PKG_SHORT_DESCRIPTION = supply object methods for I/O handles
+PERL_PKG_URL = $(BUG_URL)
+PERL_PKG_LICENSE = GPLv1
+PERL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-description
+PERL_PKG_DESCRIPTION_FILE_IN = $(PERL_PKG_NAME)-pkg-description.in
+PERL_PKG_INSTALL_SCRIPT = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-install.sh
+PERL_PKG_INSTALL_SCRIPT_IN = $(PERL_PKG_NAME)-pkg-install.sh.in
+
+PERL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-package
+
+pkg_basename = $(PERL_PKG_NAME)-$(PERL_PKG_VERSION)-$(PERL_PKG_ARCH)-$(PERL_PKG_DISTRO_NAME)-$(PERL_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(PERL_PKG)
+
+
+#
+# Common Perl5 Environment:
+# ========================
+#
+perl_environment = INSTALLDIRS=vendor
+
+perl_environment += PERL_LIB='$(TARGET_DEST_DIR)/usr/share/perl5'
+perl_environment += PERL_ARCHLIB='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5'
+perl_environment += PERL_INC='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += PERL_INCDEP='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+
+perl_environment += SITELIBEXP='/usr/share/perl5/site_perl'
+perl_environment += SITEARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+perl_environment += VENDORLIBEXP='/usr/share/perl5/vendor_perl'
+perl_environment += VENDORARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += PERLPREFIX='/usr'
+perl_environment += INSTALLPRIVLIB='/usr/share/perl5'
+perl_environment += INSTALLARCHLIB='/usr/lib$(LIBSUFFIX)/perl5'
+
+perl_environment += SITEPREFIX='/usr'
+perl_environment += INSTALLSITELIB='/usr/share/perl5/site_perl'
+perl_environment += INSTALLSITEARCH='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+
+perl_environment += VENDORPREFIX='/usr'
+perl_environment += INSTALLVENDORLIB='/usr/share/perl5/vendor_perl'
+perl_environment += INSTALLVENDORARCH='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += INSTALLBIN='/usr/bin'
+perl_environment += INSTALLSITEBIN='/usr/bin'
+perl_environment += INSTALLVENDORBIN='/usr/bin'
+
+perl_environment += INSTALLSCRIPT='/usr/bin'
+perl_environment += INSTALLSITESCRIPT='/usr/bin'
+perl_environment += INSTALLVENDORSCRIPT='/usr/bin'
+
+perl_environment += INSTALLMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLSITEMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLVENDORMAN1DIR='/usr/share/man/man1'
+
+perl_environment += INSTALLMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLSITEMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLVENDORMAN3DIR='/usr/share/man/man3'
+
+#
+# HW Specific Perl5 Environment:
+# =============================
+#
+suppress-warnings = -Wno-unused-function -Wno-unused-parameter
+
+perl_environment += AR=$(AR)
+perl_environment += RANLIB=$(RANLIB)
+perl_environment += CC='$(CC) --sysroot=$(TARGET_DEST_DIR) $(ARCH_OPTIMIZATION) $(ARCH_FLAGS) $(ARCH_DEFS)'
+perl_environment += LD='$(CC) --sysroot=$(TARGET_DEST_DIR) -shared'
+perl_environment += LDFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+#
+# Remove -I. to avoid use implemented poll functionality:
+#
+perl_environment += CCFLAGS='$(filter-out -I.,$(CFLAGS)) -I$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE $(suppress-warnings)'
+perl_environment += LDDLFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCCDLFLAGS='-fPIC'
+perl_environment += CCDLFLAGS='-Wl,-E -Wl,-rpath,/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += FULL_AR=$(AR)
+perl_environment += OSNAME=linux
+perl_environment += OSVERS=
+perl_environment += LIBC=
+
+#
+# Give the path of target machine PERL headers to the ExtUtils::MakeMaker for creating
+# the PERL_HDRS list in the resulting Makefile created by `perl Makefile.PL` command.
+#
+# see: _perl_header_files() fuction in the MM_Any.pm script to understand PERL_SRC env.
+#
+perl_src_hdrs = PERL_SRC=$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE
+
+#
+# Module Specific Perl5 Environment:
+# =================================
+#
+
+perl_local_pod = usr/lib$(LIBSUFFIX)/perl5/perllocal.pod
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(perl_src_hdrs) $(PERL) Makefile.PL $(perl_environment) ; \
+ )
+ # ======= build the perl-io-handle module =======
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) $(perl_environment) ; \
+ )
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(PERL_PKG)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(perl_environment) $(env_sysroot) ; \
+ )
+ @find $(PERL_PKG) -name '.packlist' -delete
+ @rm -f $(PERL_PKG)/$(perl_local_pod)
+ @chmod 755 $(PERL_PKG)/usr/lib$(LIBSUFFIX)/perl5/vendor_perl/auto/IO/IO.so
+ # ======= Install Documentation =======
+ @if [ -d $(PERL_PKG)/usr/share/man ]; then \
+ ( cd $(PERL_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(CURDIR)/copying/LICENSE $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @cp -a $(CURDIR)/copying/LICENSE $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a README \
+ $(PERL_PKG)/usr/share/doc/$(doc_dir_name) \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r ChangeLog ]; then \
+ DOCSDIR=`echo $(PERL_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat ChangeLog | head -n 1000 > $$DOCSDIR/ChangeLog ; \
+ touch -r ChangeLog $$DOCSDIR/ChangeLog ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(PERL_PKG))
+ # ======= Strip binaries =======
+ @( cd $(PERL_PKG) ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ @touch $@
+
+$(PERL_PKG_DESCRIPTION_FILE): $(PERL_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(PERL_PKG_INSTALL_SCRIPT): $(PERL_PKG_INSTALL_SCRIPT_IN)
+ @cat $< | $(SED) -e "s,@PERL_LOCAL_POD@,$(perl_local_pod),g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG_INSTALL_SCRIPT)
+ @cp $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG)/.DESCRIPTION
+ @cp $(PERL_PKG_INSTALL_SCRIPT) $(PERL_PKG)/.INSTALL
+ @chmod a+x $(PERL_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(PERL_PKG)/.REQUIRES
+ @echo "pkgname=$(PERL_PKG_NAME)" > $(PERL_PKG)/.PKGINFO ; \
+ echo "pkgver=$(PERL_PKG_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "arch=$(PERL_PKG_ARCH)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distroname=$(PERL_PKG_DISTRO_NAME)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distrover=$(PERL_PKG_DISTRO_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "group=$(PERL_PKG_GROUP)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(PERL_PKG_SHORT_DESCRIPTION)\"" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "url=$(PERL_PKG_URL)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "license=$(PERL_PKG_LICENSE)" >> $(PERL_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(PERL_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: perl-io-handle/1.50/PATCHES
===================================================================
Index: perl-io-handle/1.50/copying/LICENSE
===================================================================
--- perl-io-handle/1.50/copying/LICENSE (nonexistent)
+++ perl-io-handle/1.50/copying/LICENSE (revision 5)
@@ -0,0 +1,362 @@
+
+ The GNU General Public License, Version 1, February 1989
+
+ GNU GENERAL PUBLIC LICENSE
+ Version 1, February 1989
+
+ Copyright (C) 1989 Free Software Foundation, Inc.
+ 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The license agreements of most software companies try to keep users
+at the mercy of those companies. By contrast, our General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. The
+General Public License applies to the Free Software Foundation's
+software and to any other program whose authors commit to using it.
+You can use it for your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Specifically, the General Public License is designed to make
+sure that you have the freedom to give away or sell copies of free
+software, that you receive source code or can get it if you want it,
+that you can change the software or use pieces of it in new free
+programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of a such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must tell them their rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License Agreement applies to any program or other work which
+contains a notice placed by the copyright holder saying it may be
+distributed under the terms of this General Public License. The
+"Program", below, refers to any such program or work, and a "work based
+on the Program" means either the Program or any work containing the
+Program or a portion of it, either verbatim or with modifications. Each
+licensee is addressed as "you".
+
+ 1. You may copy and distribute verbatim copies of the Program's source
+code as you receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice and
+disclaimer of warranty; keep intact all the notices that refer to this
+General Public License and to the absence of any warranty; and give any
+other recipients of the Program a copy of this General Public License
+along with the Program. You may charge a fee for the physical act of
+transferring a copy.
+
+ 2. You may modify your copy or copies of the Program or any portion of
+it, and copy and distribute such modifications under the terms of Paragraph
+1 above, provided that you also do the following:
+
+ a) cause the modified files to carry prominent notices stating that
+ you changed the files and the date of any change; and
+
+ b) cause the whole of any work that you distribute or publish, that
+ in whole or in part contains the Program or any part thereof, either
+ with or without modifications, to be licensed at no charge to all
+ third parties under the terms of this General Public License (except
+ that you may choose to grant warranty protection to some or all
+ third parties, at your option).
+
+ c) If the modified program normally reads commands interactively when
+ run, you must cause it, when started running for such interactive use
+ in the simplest and most usual way, to print or display an
+ announcement including an appropriate copyright notice and a notice
+ that there is no warranty (or else, saying that you provide a
+ warranty) and that users may redistribute the program under these
+ conditions, and telling the user how to view a copy of this General
+ Public License.
+
+ d) You may charge a fee for the physical act of transferring a
+ copy, and you may at your option offer warranty protection in
+ exchange for a fee.
+
+Mere aggregation of another independent work with the Program (or its
+derivative) on a volume of a storage or distribution medium does not bring
+the other work under the scope of these terms.
+
+ 3. You may copy and distribute the Program (or a portion or derivative of
+it, under Paragraph 2) in object code or executable form under the terms of
+Paragraphs 1 and 2 above provided that you also do one of the following:
+
+ a) accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of
+ Paragraphs 1 and 2 above; or,
+
+ b) accompany it with a written offer, valid for at least three
+ years, to give any third party free (except for a nominal charge
+ for the cost of distribution) a complete machine-readable copy of the
+ corresponding source code, to be distributed under the terms of
+ Paragraphs 1 and 2 above; or,
+
+ c) accompany it with the information you received as to where the
+ corresponding source code may be obtained. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form alone.)
+
+Source code for a work means the preferred form of the work for making
+modifications to it. For an executable file, complete source code means
+all the source code for all modules it contains; but, as a special
+exception, it need not include source code for modules which are standard
+libraries that accompany the operating system on which the executable
+file runs, or for standard header files or definitions files that
+accompany that operating system.
+
+ 4. You may not copy, modify, sublicense, distribute or transfer the
+Program except as expressly provided under this General Public License.
+Any attempt otherwise to copy, modify, sublicense, distribute or transfer
+the Program is void, and will automatically terminate your rights to use
+the Program under this License. However, parties who have received
+copies, or rights to use copies, from you under this General Public
+License will not have their licenses terminated so long as such parties
+remain in full compliance.
+
+ 5. By copying, distributing or modifying the Program (or any work based
+on the Program) you indicate your acceptance of this license to do so,
+and all its terms and conditions.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the original
+licensor to copy, distribute or modify the Program subject to these
+terms and conditions. You may not impose any further restrictions on the
+recipients' exercise of the rights granted herein.
+
+ 7. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of the license which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+the license, you may choose any version ever published by the Free Software
+Foundation.
+
+ 8. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 9. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 10. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ Appendix: How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to humanity, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these
+terms.
+
+ To do so, attach the following notices to the program. It is safest to
+attach them to the start of each source file to most effectively convey
+the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) 19yy <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 1, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) 19xx name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the
+appropriate parts of the General Public License. Of course, the
+commands you use may be called something other than `show w' and `show
+c'; they could even be mouse-clicks or menu items--whatever suits your
+program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the
+ program `Gnomovision' (a program to direct compilers to make passes
+ at assemblers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+That's all there is to it!
+
+
+--- The Artistic License 1.0 ---
+
+This software is Copyright (c) 1998 by Gisle Aas.
+
+This is free software, licensed under:
+
+ The Artistic License 1.0
+
+The Artistic License
+
+Preamble
+
+The intent of this document is to state the conditions under which a Package
+may be copied, such that the Copyright Holder maintains some semblance of
+artistic control over the development of the package, while giving the users of
+the package the right to use and distribute the Package in a more-or-less
+customary fashion, plus the right to make reasonable modifications.
+
+Definitions:
+
+ - "Package" refers to the collection of files distributed by the Copyright
+ Holder, and derivatives of that collection of files created through
+ textual modification.
+ - "Standard Version" refers to such a Package if it has not been modified,
+ or has been modified in accordance with the wishes of the Copyright
+ Holder.
+ - "Copyright Holder" is whoever is named in the copyright or copyrights for
+ the package.
+ - "You" is you, if you're thinking about copying or distributing this Package.
+ - "Reasonable copying fee" is whatever you can justify on the basis of media
+ cost, duplication charges, time of people involved, and so on. (You will
+ not be required to justify it to the Copyright Holder, but only to the
+ computing community at large as a market that must bear the fee.)
+ - "Freely Available" means that no fee is charged for the item itself, though
+ there may be fees involved in handling the item. It also means that
+ recipients of the item may redistribute it under the same conditions they
+ received it.
+
+1. You may make and give away verbatim copies of the source form of the
+Standard Version of this Package without restriction, provided that you
+duplicate all of the original copyright notices and associated disclaimers.
+
+2. You may apply bug fixes, portability fixes and other modifications derived
+from the Public Domain or from the Copyright Holder. A Package modified in such
+a way shall still be considered the Standard Version.
+
+3. You may otherwise modify your copy of this Package in any way, provided that
+you insert a prominent notice in each changed file stating how and when you
+changed that file, and provided that you do at least ONE of the following:
+
+ a) place your modifications in the Public Domain or otherwise make them
+ Freely Available, such as by posting said modifications to Usenet or an
+ equivalent medium, or placing the modifications on a major archive site
+ such as ftp.uu.net, or by allowing the Copyright Holder to include your
+ modifications in the Standard Version of the Package.
+
+ b) use the modified Package only within your corporation or organization.
+
+ c) rename any non-standard executables so the names do not conflict with
+ standard executables, which must also be provided, and provide a separate
+ manual page for each non-standard executable that clearly documents how it
+ differs from the Standard Version.
+
+ d) make other distribution arrangements with the Copyright Holder.
+
+4. You may distribute the programs of this Package in object code or executable
+form, provided that you do at least ONE of the following:
+
+ a) distribute a Standard Version of the executables and library files,
+ together with instructions (in the manual page or equivalent) on where to
+ get the Standard Version.
+
+ b) accompany the distribution with the machine-readable source of the Package
+ with your modifications.
+
+ c) accompany any non-standard executables with their corresponding Standard
+ Version executables, giving the non-standard executables non-standard
+ names, and clearly documenting the differences in manual pages (or
+ equivalent), together with instructions on where to get the Standard
+ Version.
+
+ d) make other distribution arrangements with the Copyright Holder.
+
+5. You may charge a reasonable copying fee for any distribution of this
+Package. You may charge any fee you choose for support of this Package. You
+may not charge a fee for this Package itself. However, you may distribute this
+Package in aggregate with other (possibly commercial) programs as part of a
+larger (possibly commercial) software distribution provided that you do not
+advertise this Package as a product of your own.
+
+6. The scripts and library files supplied as input to or produced as output
+from the programs of this Package do not automatically fall under the copyright
+of this Package, but belong to whomever generated them, and may be sold
+commercially, and may be aggregated with this Package.
+
+7. C or perl subroutines supplied by you and linked into this Package shall not
+be considered part of this Package.
+
+8. The name of the Copyright Holder may not be used to endorse or promote
+products derived from this software without specific prior written permission.
+
+9. THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
+WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+The End
+
Index: perl-io-handle/1.50/copying
===================================================================
--- perl-io-handle/1.50/copying (nonexistent)
+++ perl-io-handle/1.50/copying (revision 5)
Property changes on: perl-io-handle/1.50/copying
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-io-handle/1.50/perl-io-handle-pkg-description.in
===================================================================
--- perl-io-handle/1.50/perl-io-handle-pkg-description.in (nonexistent)
+++ perl-io-handle/1.50/perl-io-handle-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+perl-io-handle: perl-io-handle @VERSION@ (supply object methods for I/O handles)
+perl-io-handle:
+perl-io-handle: IO::Handle is the base class for all other IO handle classes. It is
+perl-io-handle: not intended that objects of IO::Handle would be created directly,
+perl-io-handle: but instead IO::Handle is inherited from by several other classes
+perl-io-handle: in the IO hierarchy.
+perl-io-handle:
+perl-io-handle:
+perl-io-handle:
+perl-io-handle:
+perl-io-handle:
Index: perl-io-handle/1.50/perl-io-handle-pkg-install.sh.in
===================================================================
--- perl-io-handle/1.50/perl-io-handle-pkg-install.sh.in (nonexistent)
+++ perl-io-handle/1.50/perl-io-handle-pkg-install.sh.in (revision 5)
@@ -0,0 +1,64 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ if ! grep "DBI|" @PERL_LOCAL_POD@ 1> /dev/null 2> /dev/null ; then
+ cat << EOF >> @PERL_LOCAL_POD@
+=head2 Sun Jan 16 13:13:28 2022: C<Module> L<IO|IO>
+
+=over 4
+
+=item *
+
+C<installed into: /usr/share/perl5/vendor_perl>
+
+=item *
+
+C<LINKTYPE: dynamic>
+
+=item *
+
+C<VERSION: 1.50>
+
+=item *
+
+C<EXE_FILES: >
+
+=back
+
+EOF
+ fi
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: perl-io-handle/1.50/perl-io-handle-pkg-install.sh.in
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: perl-io-handle/1.50
===================================================================
--- perl-io-handle/1.50 (nonexistent)
+++ perl-io-handle/1.50 (revision 5)
Property changes on: perl-io-handle/1.50
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-io-handle
===================================================================
--- perl-io-handle (nonexistent)
+++ perl-io-handle (revision 5)
Property changes on: perl-io-handle
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-io-socket-ssl/2.075/Makefile
===================================================================
--- perl-io-socket-ssl/2.075/Makefile (nonexistent)
+++ perl-io-socket-ssl/2.075/Makefile (revision 5)
@@ -0,0 +1,285 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/d/perl-modules/CPAN/IO-Socket-SSL
+
+REQUIRES = dev/perl-modules/perl-uri/5.16
+REQUIRES += dev/perl-modules/perl-io-handle/1.50
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 2.075
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/d/perl-modules/CPAN/IO-Socket-SSL/IO-Socket-SSL-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/IO-Socket-SSL-$(version)
+src_dir_name = IO-Socket-SSL-$(version)
+doc_dir_name = perl-io-socket-ssl-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = dev
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+PERL_PKG_NAME = perl-io-socket-ssl
+PERL_PKG_VERSION = 2.075
+PERL_PKG_ARCH = $(TOOLCHAIN)
+PERL_PKG_DISTRO_NAME = $(DISTRO_NAME)
+PERL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+PERL_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+PERL_PKG_SHORT_DESCRIPTION = SSL sockets with IO::Socket interface
+PERL_PKG_URL = $(BUG_URL)
+PERL_PKG_LICENSE = GPLv1
+PERL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-description
+PERL_PKG_DESCRIPTION_FILE_IN = $(PERL_PKG_NAME)-pkg-description.in
+PERL_PKG_INSTALL_SCRIPT = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-install.sh
+PERL_PKG_INSTALL_SCRIPT_IN = $(PERL_PKG_NAME)-pkg-install.sh.in
+
+PERL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-package
+
+pkg_basename = $(PERL_PKG_NAME)-$(PERL_PKG_VERSION)-$(PERL_PKG_ARCH)-$(PERL_PKG_DISTRO_NAME)-$(PERL_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(PERL_PKG)
+
+
+#
+# Common Perl5 Environment:
+# ========================
+#
+perl_environment = INSTALLDIRS=vendor
+
+perl_environment += PERL_LIB='$(TARGET_DEST_DIR)/usr/share/perl5'
+perl_environment += PERL_ARCHLIB='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5'
+perl_environment += PERL_INC='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += PERL_INCDEP='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+
+perl_environment += SITELIBEXP='/usr/share/perl5/site_perl'
+perl_environment += SITEARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+perl_environment += VENDORLIBEXP='/usr/share/perl5/vendor_perl'
+perl_environment += VENDORARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += PERLPREFIX='/usr'
+perl_environment += INSTALLPRIVLIB='/usr/share/perl5'
+perl_environment += INSTALLARCHLIB='/usr/lib$(LIBSUFFIX)/perl5'
+
+perl_environment += SITEPREFIX='/usr'
+perl_environment += INSTALLSITELIB='/usr/share/perl5/site_perl'
+perl_environment += INSTALLSITEARCH='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+
+perl_environment += VENDORPREFIX='/usr'
+perl_environment += INSTALLVENDORLIB='/usr/share/perl5/vendor_perl'
+perl_environment += INSTALLVENDORARCH='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += INSTALLBIN='/usr/bin'
+perl_environment += INSTALLSITEBIN='/usr/bin'
+perl_environment += INSTALLVENDORBIN='/usr/bin'
+
+perl_environment += INSTALLSCRIPT='/usr/bin'
+perl_environment += INSTALLSITESCRIPT='/usr/bin'
+perl_environment += INSTALLVENDORSCRIPT='/usr/bin'
+
+perl_environment += INSTALLMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLSITEMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLVENDORMAN1DIR='/usr/share/man/man1'
+
+perl_environment += INSTALLMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLSITEMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLVENDORMAN3DIR='/usr/share/man/man3'
+
+#
+# HW Specific Perl5 Environment:
+# =============================
+#
+suppress-warnings = -Wno-unused-function -Wno-unused-parameter
+
+perl_environment += AR=$(AR)
+perl_environment += RANLIB=$(RANLIB)
+perl_environment += CC='$(CC) --sysroot=$(TARGET_DEST_DIR) $(ARCH_OPTIMIZATION) $(ARCH_FLAGS) $(ARCH_DEFS)'
+perl_environment += LD='$(CC) --sysroot=$(TARGET_DEST_DIR) -shared'
+perl_environment += LDFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCFLAGS='$(CFLAGS) -I$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE $(suppress-warnings)'
+perl_environment += LDDLFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCCDLFLAGS='-fPIC'
+perl_environment += CCDLFLAGS='-Wl,-E -Wl,-rpath,/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += FULL_AR=$(AR)
+perl_environment += OSNAME=linux
+perl_environment += OSVERS=
+perl_environment += LIBC=
+
+#
+# Give the path of target machine PERL headers to the ExtUtils::MakeMaker for creating
+# the PERL_HDRS list in the resulting Makefile created by `perl Makefile.PL` command.
+#
+# see: _perl_header_files() fuction in the MM_Any.pm script to understand PERL_SRC env.
+#
+perl_src_hdrs = PERL_SRC=$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE
+
+#
+# Module Specific Perl5 Environment:
+# =================================
+#
+
+perl_local_pod = usr/lib$(LIBSUFFIX)/perl5/perllocal.pod
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(perl_src_hdrs) NO_NETWORK_TESTING=yes $(PERL) Makefile.PL $(perl_environment) ; \
+ )
+ # ======= build the perl-io-socket-ssl module =======
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) $(perl_environment) ; \
+ )
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(PERL_PKG)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(perl_environment) $(env_sysroot) ; \
+ )
+ @find $(PERL_PKG) -name '.packlist' -delete
+ @rm -f $(PERL_PKG)/$(perl_local_pod)
+ # ======= Install Documentation =======
+ @if [ -d $(PERL_PKG)/usr/share/man ]; then \
+ ( cd $(PERL_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(CURDIR)/copying/LICENSE $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @cp -a $(CURDIR)/copying/LICENSE $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a certs example BUGS README \
+ $(PERL_PKG)/usr/share/doc/$(doc_dir_name) \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r Changes ]; then \
+ DOCSDIR=`echo $(PERL_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat Changes | head -n 1000 > $$DOCSDIR/Changes ; \
+ touch -r Changes $$DOCSDIR/Changes ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(PERL_PKG))
+ @touch $@
+
+$(PERL_PKG_DESCRIPTION_FILE): $(PERL_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(PERL_PKG_INSTALL_SCRIPT): $(PERL_PKG_INSTALL_SCRIPT_IN)
+ @cat $< | $(SED) -e "s,@PERL_LOCAL_POD@,$(perl_local_pod),g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG_INSTALL_SCRIPT)
+ @cp $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG)/.DESCRIPTION
+ @cp $(PERL_PKG_INSTALL_SCRIPT) $(PERL_PKG)/.INSTALL
+ @chmod a+x $(PERL_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(PERL_PKG)/.REQUIRES
+ @echo "pkgname=$(PERL_PKG_NAME)" > $(PERL_PKG)/.PKGINFO ; \
+ echo "pkgver=$(PERL_PKG_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "arch=$(PERL_PKG_ARCH)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distroname=$(PERL_PKG_DISTRO_NAME)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distrover=$(PERL_PKG_DISTRO_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "group=$(PERL_PKG_GROUP)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(PERL_PKG_SHORT_DESCRIPTION)\"" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "url=$(PERL_PKG_URL)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "license=$(PERL_PKG_LICENSE)" >> $(PERL_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(PERL_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: perl-io-socket-ssl/2.075/PATCHES
===================================================================
Index: perl-io-socket-ssl/2.075/copying/LICENSE
===================================================================
--- perl-io-socket-ssl/2.075/copying/LICENSE (nonexistent)
+++ perl-io-socket-ssl/2.075/copying/LICENSE (revision 5)
@@ -0,0 +1,362 @@
+
+ The GNU General Public License, Version 1, February 1989
+
+ GNU GENERAL PUBLIC LICENSE
+ Version 1, February 1989
+
+ Copyright (C) 1989 Free Software Foundation, Inc.
+ 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The license agreements of most software companies try to keep users
+at the mercy of those companies. By contrast, our General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. The
+General Public License applies to the Free Software Foundation's
+software and to any other program whose authors commit to using it.
+You can use it for your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Specifically, the General Public License is designed to make
+sure that you have the freedom to give away or sell copies of free
+software, that you receive source code or can get it if you want it,
+that you can change the software or use pieces of it in new free
+programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of a such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must tell them their rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License Agreement applies to any program or other work which
+contains a notice placed by the copyright holder saying it may be
+distributed under the terms of this General Public License. The
+"Program", below, refers to any such program or work, and a "work based
+on the Program" means either the Program or any work containing the
+Program or a portion of it, either verbatim or with modifications. Each
+licensee is addressed as "you".
+
+ 1. You may copy and distribute verbatim copies of the Program's source
+code as you receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice and
+disclaimer of warranty; keep intact all the notices that refer to this
+General Public License and to the absence of any warranty; and give any
+other recipients of the Program a copy of this General Public License
+along with the Program. You may charge a fee for the physical act of
+transferring a copy.
+
+ 2. You may modify your copy or copies of the Program or any portion of
+it, and copy and distribute such modifications under the terms of Paragraph
+1 above, provided that you also do the following:
+
+ a) cause the modified files to carry prominent notices stating that
+ you changed the files and the date of any change; and
+
+ b) cause the whole of any work that you distribute or publish, that
+ in whole or in part contains the Program or any part thereof, either
+ with or without modifications, to be licensed at no charge to all
+ third parties under the terms of this General Public License (except
+ that you may choose to grant warranty protection to some or all
+ third parties, at your option).
+
+ c) If the modified program normally reads commands interactively when
+ run, you must cause it, when started running for such interactive use
+ in the simplest and most usual way, to print or display an
+ announcement including an appropriate copyright notice and a notice
+ that there is no warranty (or else, saying that you provide a
+ warranty) and that users may redistribute the program under these
+ conditions, and telling the user how to view a copy of this General
+ Public License.
+
+ d) You may charge a fee for the physical act of transferring a
+ copy, and you may at your option offer warranty protection in
+ exchange for a fee.
+
+Mere aggregation of another independent work with the Program (or its
+derivative) on a volume of a storage or distribution medium does not bring
+the other work under the scope of these terms.
+
+ 3. You may copy and distribute the Program (or a portion or derivative of
+it, under Paragraph 2) in object code or executable form under the terms of
+Paragraphs 1 and 2 above provided that you also do one of the following:
+
+ a) accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of
+ Paragraphs 1 and 2 above; or,
+
+ b) accompany it with a written offer, valid for at least three
+ years, to give any third party free (except for a nominal charge
+ for the cost of distribution) a complete machine-readable copy of the
+ corresponding source code, to be distributed under the terms of
+ Paragraphs 1 and 2 above; or,
+
+ c) accompany it with the information you received as to where the
+ corresponding source code may be obtained. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form alone.)
+
+Source code for a work means the preferred form of the work for making
+modifications to it. For an executable file, complete source code means
+all the source code for all modules it contains; but, as a special
+exception, it need not include source code for modules which are standard
+libraries that accompany the operating system on which the executable
+file runs, or for standard header files or definitions files that
+accompany that operating system.
+
+ 4. You may not copy, modify, sublicense, distribute or transfer the
+Program except as expressly provided under this General Public License.
+Any attempt otherwise to copy, modify, sublicense, distribute or transfer
+the Program is void, and will automatically terminate your rights to use
+the Program under this License. However, parties who have received
+copies, or rights to use copies, from you under this General Public
+License will not have their licenses terminated so long as such parties
+remain in full compliance.
+
+ 5. By copying, distributing or modifying the Program (or any work based
+on the Program) you indicate your acceptance of this license to do so,
+and all its terms and conditions.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the original
+licensor to copy, distribute or modify the Program subject to these
+terms and conditions. You may not impose any further restrictions on the
+recipients' exercise of the rights granted herein.
+
+ 7. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of the license which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+the license, you may choose any version ever published by the Free Software
+Foundation.
+
+ 8. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 9. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 10. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ Appendix: How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to humanity, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these
+terms.
+
+ To do so, attach the following notices to the program. It is safest to
+attach them to the start of each source file to most effectively convey
+the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) 19yy <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 1, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) 19xx name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the
+appropriate parts of the General Public License. Of course, the
+commands you use may be called something other than `show w' and `show
+c'; they could even be mouse-clicks or menu items--whatever suits your
+program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the
+ program `Gnomovision' (a program to direct compilers to make passes
+ at assemblers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+That's all there is to it!
+
+
+--- The Artistic License 1.0 ---
+
+This software is Copyright (c) 1998 by Gisle Aas.
+
+This is free software, licensed under:
+
+ The Artistic License 1.0
+
+The Artistic License
+
+Preamble
+
+The intent of this document is to state the conditions under which a Package
+may be copied, such that the Copyright Holder maintains some semblance of
+artistic control over the development of the package, while giving the users of
+the package the right to use and distribute the Package in a more-or-less
+customary fashion, plus the right to make reasonable modifications.
+
+Definitions:
+
+ - "Package" refers to the collection of files distributed by the Copyright
+ Holder, and derivatives of that collection of files created through
+ textual modification.
+ - "Standard Version" refers to such a Package if it has not been modified,
+ or has been modified in accordance with the wishes of the Copyright
+ Holder.
+ - "Copyright Holder" is whoever is named in the copyright or copyrights for
+ the package.
+ - "You" is you, if you're thinking about copying or distributing this Package.
+ - "Reasonable copying fee" is whatever you can justify on the basis of media
+ cost, duplication charges, time of people involved, and so on. (You will
+ not be required to justify it to the Copyright Holder, but only to the
+ computing community at large as a market that must bear the fee.)
+ - "Freely Available" means that no fee is charged for the item itself, though
+ there may be fees involved in handling the item. It also means that
+ recipients of the item may redistribute it under the same conditions they
+ received it.
+
+1. You may make and give away verbatim copies of the source form of the
+Standard Version of this Package without restriction, provided that you
+duplicate all of the original copyright notices and associated disclaimers.
+
+2. You may apply bug fixes, portability fixes and other modifications derived
+from the Public Domain or from the Copyright Holder. A Package modified in such
+a way shall still be considered the Standard Version.
+
+3. You may otherwise modify your copy of this Package in any way, provided that
+you insert a prominent notice in each changed file stating how and when you
+changed that file, and provided that you do at least ONE of the following:
+
+ a) place your modifications in the Public Domain or otherwise make them
+ Freely Available, such as by posting said modifications to Usenet or an
+ equivalent medium, or placing the modifications on a major archive site
+ such as ftp.uu.net, or by allowing the Copyright Holder to include your
+ modifications in the Standard Version of the Package.
+
+ b) use the modified Package only within your corporation or organization.
+
+ c) rename any non-standard executables so the names do not conflict with
+ standard executables, which must also be provided, and provide a separate
+ manual page for each non-standard executable that clearly documents how it
+ differs from the Standard Version.
+
+ d) make other distribution arrangements with the Copyright Holder.
+
+4. You may distribute the programs of this Package in object code or executable
+form, provided that you do at least ONE of the following:
+
+ a) distribute a Standard Version of the executables and library files,
+ together with instructions (in the manual page or equivalent) on where to
+ get the Standard Version.
+
+ b) accompany the distribution with the machine-readable source of the Package
+ with your modifications.
+
+ c) accompany any non-standard executables with their corresponding Standard
+ Version executables, giving the non-standard executables non-standard
+ names, and clearly documenting the differences in manual pages (or
+ equivalent), together with instructions on where to get the Standard
+ Version.
+
+ d) make other distribution arrangements with the Copyright Holder.
+
+5. You may charge a reasonable copying fee for any distribution of this
+Package. You may charge any fee you choose for support of this Package. You
+may not charge a fee for this Package itself. However, you may distribute this
+Package in aggregate with other (possibly commercial) programs as part of a
+larger (possibly commercial) software distribution provided that you do not
+advertise this Package as a product of your own.
+
+6. The scripts and library files supplied as input to or produced as output
+from the programs of this Package do not automatically fall under the copyright
+of this Package, but belong to whomever generated them, and may be sold
+commercially, and may be aggregated with this Package.
+
+7. C or perl subroutines supplied by you and linked into this Package shall not
+be considered part of this Package.
+
+8. The name of the Copyright Holder may not be used to endorse or promote
+products derived from this software without specific prior written permission.
+
+9. THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
+WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+The End
+
Index: perl-io-socket-ssl/2.075/copying
===================================================================
--- perl-io-socket-ssl/2.075/copying (nonexistent)
+++ perl-io-socket-ssl/2.075/copying (revision 5)
Property changes on: perl-io-socket-ssl/2.075/copying
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-io-socket-ssl/2.075/perl-io-socket-ssl-pkg-description.in
===================================================================
--- perl-io-socket-ssl/2.075/perl-io-socket-ssl-pkg-description.in (nonexistent)
+++ perl-io-socket-ssl/2.075/perl-io-socket-ssl-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+perl-io-socket-ssl: perl-io-socket-ssl @VERSION@ (SSL sockets with IO::Socket interface)
+perl-io-socket-ssl:
+perl-io-socket-ssl: IO::Socket::SSL makes using SSL/TLS much easier by wrapping the
+perl-io-socket-ssl: necessary functionality into the familiar IO::Socket interface and
+perl-io-socket-ssl: providing secure defaults whenever possible. This way, existing
+perl-io-socket-ssl: applications can be made SSL-aware without much effort, at least
+perl-io-socket-ssl: if you do blocking I/O and don't use select or poll.
+perl-io-socket-ssl:
+perl-io-socket-ssl:
+perl-io-socket-ssl:
+perl-io-socket-ssl:
Index: perl-io-socket-ssl/2.075/perl-io-socket-ssl-pkg-install.sh.in
===================================================================
--- perl-io-socket-ssl/2.075/perl-io-socket-ssl-pkg-install.sh.in (nonexistent)
+++ perl-io-socket-ssl/2.075/perl-io-socket-ssl-pkg-install.sh.in (revision 5)
@@ -0,0 +1,64 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ if ! grep "DBI|" @PERL_LOCAL_POD@ 1> /dev/null 2> /dev/null ; then
+ cat << EOF >> @PERL_LOCAL_POD@
+=head2 Sun Jan 16 13:43:00 2022: C<Module> L<IO::Socket::SSL|IO::Socket::SSL>
+
+=over 4
+
+=item *
+
+C<installed into: /usr/share/perl5/vendor_perl>
+
+=item *
+
+C<LINKTYPE: dynamic>
+
+=item *
+
+C<VERSION: 2.075>
+
+=item *
+
+C<EXE_FILES: >
+
+=back
+
+EOF
+ fi
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: perl-io-socket-ssl/2.075/perl-io-socket-ssl-pkg-install.sh.in
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: perl-io-socket-ssl/2.075
===================================================================
--- perl-io-socket-ssl/2.075 (nonexistent)
+++ perl-io-socket-ssl/2.075 (revision 5)
Property changes on: perl-io-socket-ssl/2.075
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-io-socket-ssl
===================================================================
--- perl-io-socket-ssl (nonexistent)
+++ perl-io-socket-ssl (revision 5)
Property changes on: perl-io-socket-ssl
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-locale-gettext/1.07/Makefile
===================================================================
--- perl-locale-gettext/1.07/Makefile (nonexistent)
+++ perl-locale-gettext/1.07/Makefile (revision 5)
@@ -0,0 +1,290 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/d/perl-modules/CPAN/Locale-gettext
+
+REQUIRES = dev/perl/5.36.0
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 1.07
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/d/perl-modules/CPAN/Locale-gettext/gettext-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/Locale-gettext-$(version)
+src_dir_name = Locale-gettext-$(version)
+doc_dir_name = perl-locale-gettext-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = dev
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+PERL_PKG_NAME = perl-locale-gettext
+PERL_PKG_VERSION = 1.07
+PERL_PKG_ARCH = $(TOOLCHAIN)
+PERL_PKG_DISTRO_NAME = $(DISTRO_NAME)
+PERL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+PERL_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+PERL_PKG_SHORT_DESCRIPTION = Locale gettext
+PERL_PKG_URL = $(BUG_URL)
+PERL_PKG_LICENSE = GPLv1
+PERL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-description
+PERL_PKG_DESCRIPTION_FILE_IN = $(PERL_PKG_NAME)-pkg-description.in
+PERL_PKG_INSTALL_SCRIPT = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-install.sh
+PERL_PKG_INSTALL_SCRIPT_IN = $(PERL_PKG_NAME)-pkg-install.sh.in
+
+PERL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-package
+
+pkg_basename = $(PERL_PKG_NAME)-$(PERL_PKG_VERSION)-$(PERL_PKG_ARCH)-$(PERL_PKG_DISTRO_NAME)-$(PERL_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(PERL_PKG)
+
+
+#
+# Common Perl5 Environment:
+# ========================
+#
+perl_environment = INSTALLDIRS=vendor
+
+perl_environment += PERL_LIB='$(TARGET_DEST_DIR)/usr/share/perl5'
+perl_environment += PERL_ARCHLIB='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5'
+perl_environment += PERL_INC='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += PERL_INCDEP='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+
+perl_environment += SITELIBEXP='/usr/share/perl5/site_perl'
+perl_environment += SITEARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+perl_environment += VENDORLIBEXP='/usr/share/perl5/vendor_perl'
+perl_environment += VENDORARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += PERLPREFIX='/usr'
+perl_environment += INSTALLPRIVLIB='/usr/share/perl5'
+perl_environment += INSTALLARCHLIB='/usr/lib$(LIBSUFFIX)/perl5'
+
+perl_environment += SITEPREFIX='/usr'
+perl_environment += INSTALLSITELIB='/usr/share/perl5/site_perl'
+perl_environment += INSTALLSITEARCH='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+
+perl_environment += VENDORPREFIX='/usr'
+perl_environment += INSTALLVENDORLIB='/usr/share/perl5/vendor_perl'
+perl_environment += INSTALLVENDORARCH='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += INSTALLBIN='/usr/bin'
+perl_environment += INSTALLSITEBIN='/usr/bin'
+perl_environment += INSTALLVENDORBIN='/usr/bin'
+
+perl_environment += INSTALLSCRIPT='/usr/bin'
+perl_environment += INSTALLSITESCRIPT='/usr/bin'
+perl_environment += INSTALLVENDORSCRIPT='/usr/bin'
+
+perl_environment += INSTALLMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLSITEMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLVENDORMAN1DIR='/usr/share/man/man1'
+
+perl_environment += INSTALLMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLSITEMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLVENDORMAN3DIR='/usr/share/man/man3'
+
+#
+# HW Specific Perl5 Environment:
+# =============================
+#
+suppress-warnings = -Wno-unused-function -Wno-unused-parameter
+
+perl_environment += AR=$(AR)
+perl_environment += RANLIB=$(RANLIB)
+perl_environment += CC='$(CC) --sysroot=$(TARGET_DEST_DIR) $(ARCH_OPTIMIZATION) $(ARCH_FLAGS) $(ARCH_DEFS)'
+perl_environment += LD='$(CC) --sysroot=$(TARGET_DEST_DIR) -shared'
+perl_environment += LDFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCFLAGS='$(CFLAGS) -I$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE $(suppress-warnings)'
+perl_environment += LDDLFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCCDLFLAGS='-fPIC'
+perl_environment += CCDLFLAGS='-Wl,-E -Wl,-rpath,/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += FULL_AR=$(AR)
+perl_environment += OSNAME=linux
+perl_environment += OSVERS=
+perl_environment += LIBC=
+
+#
+# Give the path of target machine PERL headers to the ExtUtils::MakeMaker for creating
+# the PERL_HDRS list in the resulting Makefile created by `perl Makefile.PL` command.
+#
+# see: _perl_header_files() fuction in the MM_Any.pm script to understand PERL_SRC env.
+#
+perl_src_hdrs = PERL_SRC=$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE
+perl_src_hdrs += LANG=
+
+#
+# Module Specific Perl5 Environment:
+# =================================
+#
+
+perl_local_pod = usr/lib$(LIBSUFFIX)/perl5/perllocal.pod
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(perl_src_hdrs) $(PERL) Makefile.PL $(perl_environment) ; \
+ )
+ # ======= build the perl-locale-gettext module =======
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) $(perl_environment) ; \
+ )
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(PERL_PKG)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(perl_environment) $(env_sysroot) ; \
+ )
+ @find $(PERL_PKG) -name '.packlist' -delete
+ @rm -f $(PERL_PKG)/$(perl_local_pod)
+ @chmod 755 $(PERL_PKG)/usr/lib$(LIBSUFFIX)/perl5/vendor_perl/auto/Locale/gettext/gettext.so
+ # ======= Install Documentation =======
+ @if [ -d $(PERL_PKG)/usr/share/man ]; then \
+ ( cd $(PERL_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(CURDIR)/copying/LICENSE $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @cp -a $(CURDIR)/copying/LICENSE $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a README \
+ $(PERL_PKG)/usr/share/doc/$(doc_dir_name) \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r Changes ]; then \
+ DOCSDIR=`echo $(PERL_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat Changes | head -n 1000 > $$DOCSDIR/Changes ; \
+ touch -r Changes $$DOCSDIR/Changes ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(PERL_PKG))
+ # ======= Strip binaries =======
+ @( cd $(PERL_PKG) ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ @touch $@
+
+$(PERL_PKG_DESCRIPTION_FILE): $(PERL_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(PERL_PKG_INSTALL_SCRIPT): $(PERL_PKG_INSTALL_SCRIPT_IN)
+ @cat $< | $(SED) -e "s,@PERL_LOCAL_POD@,$(perl_local_pod),g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG_INSTALL_SCRIPT)
+ @cp $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG)/.DESCRIPTION
+ @cp $(PERL_PKG_INSTALL_SCRIPT) $(PERL_PKG)/.INSTALL
+ @chmod a+x $(PERL_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(PERL_PKG)/.REQUIRES
+ @echo "pkgname=$(PERL_PKG_NAME)" > $(PERL_PKG)/.PKGINFO ; \
+ echo "pkgver=$(PERL_PKG_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "arch=$(PERL_PKG_ARCH)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distroname=$(PERL_PKG_DISTRO_NAME)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distrover=$(PERL_PKG_DISTRO_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "group=$(PERL_PKG_GROUP)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(PERL_PKG_SHORT_DESCRIPTION)\"" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "url=$(PERL_PKG_URL)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "license=$(PERL_PKG_LICENSE)" >> $(PERL_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(PERL_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: perl-locale-gettext/1.07/PATCHES
===================================================================
Index: perl-locale-gettext/1.07/copying/LICENSE
===================================================================
--- perl-locale-gettext/1.07/copying/LICENSE (nonexistent)
+++ perl-locale-gettext/1.07/copying/LICENSE (revision 5)
@@ -0,0 +1,362 @@
+
+ The GNU General Public License, Version 1, February 1989
+
+ GNU GENERAL PUBLIC LICENSE
+ Version 1, February 1989
+
+ Copyright (C) 1989 Free Software Foundation, Inc.
+ 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The license agreements of most software companies try to keep users
+at the mercy of those companies. By contrast, our General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. The
+General Public License applies to the Free Software Foundation's
+software and to any other program whose authors commit to using it.
+You can use it for your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Specifically, the General Public License is designed to make
+sure that you have the freedom to give away or sell copies of free
+software, that you receive source code or can get it if you want it,
+that you can change the software or use pieces of it in new free
+programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of a such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must tell them their rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License Agreement applies to any program or other work which
+contains a notice placed by the copyright holder saying it may be
+distributed under the terms of this General Public License. The
+"Program", below, refers to any such program or work, and a "work based
+on the Program" means either the Program or any work containing the
+Program or a portion of it, either verbatim or with modifications. Each
+licensee is addressed as "you".
+
+ 1. You may copy and distribute verbatim copies of the Program's source
+code as you receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice and
+disclaimer of warranty; keep intact all the notices that refer to this
+General Public License and to the absence of any warranty; and give any
+other recipients of the Program a copy of this General Public License
+along with the Program. You may charge a fee for the physical act of
+transferring a copy.
+
+ 2. You may modify your copy or copies of the Program or any portion of
+it, and copy and distribute such modifications under the terms of Paragraph
+1 above, provided that you also do the following:
+
+ a) cause the modified files to carry prominent notices stating that
+ you changed the files and the date of any change; and
+
+ b) cause the whole of any work that you distribute or publish, that
+ in whole or in part contains the Program or any part thereof, either
+ with or without modifications, to be licensed at no charge to all
+ third parties under the terms of this General Public License (except
+ that you may choose to grant warranty protection to some or all
+ third parties, at your option).
+
+ c) If the modified program normally reads commands interactively when
+ run, you must cause it, when started running for such interactive use
+ in the simplest and most usual way, to print or display an
+ announcement including an appropriate copyright notice and a notice
+ that there is no warranty (or else, saying that you provide a
+ warranty) and that users may redistribute the program under these
+ conditions, and telling the user how to view a copy of this General
+ Public License.
+
+ d) You may charge a fee for the physical act of transferring a
+ copy, and you may at your option offer warranty protection in
+ exchange for a fee.
+
+Mere aggregation of another independent work with the Program (or its
+derivative) on a volume of a storage or distribution medium does not bring
+the other work under the scope of these terms.
+
+ 3. You may copy and distribute the Program (or a portion or derivative of
+it, under Paragraph 2) in object code or executable form under the terms of
+Paragraphs 1 and 2 above provided that you also do one of the following:
+
+ a) accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of
+ Paragraphs 1 and 2 above; or,
+
+ b) accompany it with a written offer, valid for at least three
+ years, to give any third party free (except for a nominal charge
+ for the cost of distribution) a complete machine-readable copy of the
+ corresponding source code, to be distributed under the terms of
+ Paragraphs 1 and 2 above; or,
+
+ c) accompany it with the information you received as to where the
+ corresponding source code may be obtained. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form alone.)
+
+Source code for a work means the preferred form of the work for making
+modifications to it. For an executable file, complete source code means
+all the source code for all modules it contains; but, as a special
+exception, it need not include source code for modules which are standard
+libraries that accompany the operating system on which the executable
+file runs, or for standard header files or definitions files that
+accompany that operating system.
+
+ 4. You may not copy, modify, sublicense, distribute or transfer the
+Program except as expressly provided under this General Public License.
+Any attempt otherwise to copy, modify, sublicense, distribute or transfer
+the Program is void, and will automatically terminate your rights to use
+the Program under this License. However, parties who have received
+copies, or rights to use copies, from you under this General Public
+License will not have their licenses terminated so long as such parties
+remain in full compliance.
+
+ 5. By copying, distributing or modifying the Program (or any work based
+on the Program) you indicate your acceptance of this license to do so,
+and all its terms and conditions.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the original
+licensor to copy, distribute or modify the Program subject to these
+terms and conditions. You may not impose any further restrictions on the
+recipients' exercise of the rights granted herein.
+
+ 7. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of the license which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+the license, you may choose any version ever published by the Free Software
+Foundation.
+
+ 8. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 9. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 10. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ Appendix: How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to humanity, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these
+terms.
+
+ To do so, attach the following notices to the program. It is safest to
+attach them to the start of each source file to most effectively convey
+the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) 19yy <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 1, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) 19xx name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the
+appropriate parts of the General Public License. Of course, the
+commands you use may be called something other than `show w' and `show
+c'; they could even be mouse-clicks or menu items--whatever suits your
+program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the
+ program `Gnomovision' (a program to direct compilers to make passes
+ at assemblers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+That's all there is to it!
+
+
+--- The Artistic License 1.0 ---
+
+This software is Copyright (c) 1998 by Gisle Aas.
+
+This is free software, licensed under:
+
+ The Artistic License 1.0
+
+The Artistic License
+
+Preamble
+
+The intent of this document is to state the conditions under which a Package
+may be copied, such that the Copyright Holder maintains some semblance of
+artistic control over the development of the package, while giving the users of
+the package the right to use and distribute the Package in a more-or-less
+customary fashion, plus the right to make reasonable modifications.
+
+Definitions:
+
+ - "Package" refers to the collection of files distributed by the Copyright
+ Holder, and derivatives of that collection of files created through
+ textual modification.
+ - "Standard Version" refers to such a Package if it has not been modified,
+ or has been modified in accordance with the wishes of the Copyright
+ Holder.
+ - "Copyright Holder" is whoever is named in the copyright or copyrights for
+ the package.
+ - "You" is you, if you're thinking about copying or distributing this Package.
+ - "Reasonable copying fee" is whatever you can justify on the basis of media
+ cost, duplication charges, time of people involved, and so on. (You will
+ not be required to justify it to the Copyright Holder, but only to the
+ computing community at large as a market that must bear the fee.)
+ - "Freely Available" means that no fee is charged for the item itself, though
+ there may be fees involved in handling the item. It also means that
+ recipients of the item may redistribute it under the same conditions they
+ received it.
+
+1. You may make and give away verbatim copies of the source form of the
+Standard Version of this Package without restriction, provided that you
+duplicate all of the original copyright notices and associated disclaimers.
+
+2. You may apply bug fixes, portability fixes and other modifications derived
+from the Public Domain or from the Copyright Holder. A Package modified in such
+a way shall still be considered the Standard Version.
+
+3. You may otherwise modify your copy of this Package in any way, provided that
+you insert a prominent notice in each changed file stating how and when you
+changed that file, and provided that you do at least ONE of the following:
+
+ a) place your modifications in the Public Domain or otherwise make them
+ Freely Available, such as by posting said modifications to Usenet or an
+ equivalent medium, or placing the modifications on a major archive site
+ such as ftp.uu.net, or by allowing the Copyright Holder to include your
+ modifications in the Standard Version of the Package.
+
+ b) use the modified Package only within your corporation or organization.
+
+ c) rename any non-standard executables so the names do not conflict with
+ standard executables, which must also be provided, and provide a separate
+ manual page for each non-standard executable that clearly documents how it
+ differs from the Standard Version.
+
+ d) make other distribution arrangements with the Copyright Holder.
+
+4. You may distribute the programs of this Package in object code or executable
+form, provided that you do at least ONE of the following:
+
+ a) distribute a Standard Version of the executables and library files,
+ together with instructions (in the manual page or equivalent) on where to
+ get the Standard Version.
+
+ b) accompany the distribution with the machine-readable source of the Package
+ with your modifications.
+
+ c) accompany any non-standard executables with their corresponding Standard
+ Version executables, giving the non-standard executables non-standard
+ names, and clearly documenting the differences in manual pages (or
+ equivalent), together with instructions on where to get the Standard
+ Version.
+
+ d) make other distribution arrangements with the Copyright Holder.
+
+5. You may charge a reasonable copying fee for any distribution of this
+Package. You may charge any fee you choose for support of this Package. You
+may not charge a fee for this Package itself. However, you may distribute this
+Package in aggregate with other (possibly commercial) programs as part of a
+larger (possibly commercial) software distribution provided that you do not
+advertise this Package as a product of your own.
+
+6. The scripts and library files supplied as input to or produced as output
+from the programs of this Package do not automatically fall under the copyright
+of this Package, but belong to whomever generated them, and may be sold
+commercially, and may be aggregated with this Package.
+
+7. C or perl subroutines supplied by you and linked into this Package shall not
+be considered part of this Package.
+
+8. The name of the Copyright Holder may not be used to endorse or promote
+products derived from this software without specific prior written permission.
+
+9. THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
+WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+The End
+
Index: perl-locale-gettext/1.07/copying
===================================================================
--- perl-locale-gettext/1.07/copying (nonexistent)
+++ perl-locale-gettext/1.07/copying (revision 5)
Property changes on: perl-locale-gettext/1.07/copying
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-locale-gettext/1.07/perl-locale-gettext-pkg-description.in
===================================================================
--- perl-locale-gettext/1.07/perl-locale-gettext-pkg-description.in (nonexistent)
+++ perl-locale-gettext/1.07/perl-locale-gettext-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+perl-locale-gettext: perl-locale-gettext @VERSION@ (Locale gettext)
+perl-locale-gettext:
+perl-locale-gettext: This is a perl5 module quickly written to gain access
+perl-locale-gettext: to the C library functions for internatialization.
+perl-locale-gettext: They work just like the C versions.
+perl-locale-gettext:
+perl-locale-gettext:
+perl-locale-gettext:
+perl-locale-gettext:
+perl-locale-gettext:
+perl-locale-gettext:
Index: perl-locale-gettext/1.07/perl-locale-gettext-pkg-install.sh.in
===================================================================
--- perl-locale-gettext/1.07/perl-locale-gettext-pkg-install.sh.in (nonexistent)
+++ perl-locale-gettext/1.07/perl-locale-gettext-pkg-install.sh.in (revision 5)
@@ -0,0 +1,64 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ if ! grep "Locale::gettext|" @PERL_LOCAL_POD@ 1> /dev/null 2> /dev/null ; then
+ cat << EOF >> @PERL_LOCAL_POD@
+=head2 Sun Jan 16 11:37:25 2022: C<Module> L<Locale::gettext|Locale::gettext>
+
+=over 4
+
+=item *
+
+C<installed into: /usr/share/perl5/vendor_perl>
+
+=item *
+
+C<LINKTYPE: dynamic>
+
+=item *
+
+C<VERSION: 1.07>
+
+=item *
+
+C<EXE_FILES: >
+
+=back
+
+EOF
+ fi
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: perl-locale-gettext/1.07/perl-locale-gettext-pkg-install.sh.in
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: perl-locale-gettext/1.07
===================================================================
--- perl-locale-gettext/1.07 (nonexistent)
+++ perl-locale-gettext/1.07 (revision 5)
Property changes on: perl-locale-gettext/1.07
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-locale-gettext
===================================================================
--- perl-locale-gettext (nonexistent)
+++ perl-locale-gettext (revision 5)
Property changes on: perl-locale-gettext
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-mailtools/2.21/Makefile
===================================================================
--- perl-mailtools/2.21/Makefile (nonexistent)
+++ perl-mailtools/2.21/Makefile (revision 5)
@@ -0,0 +1,288 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/d/perl-modules/CPAN/MailTools
+
+REQUIRES = dev/perl-modules/perl-time-date/0.05
+REQUIRES += dev/perl-modules/perl-io-socket-ssl/2.075
+REQUIRES += dev/perl-modules/perl-net-domain/3.14
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 2.21
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/d/perl-modules/CPAN/MailTools/MailTools-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/MailTools-$(version)
+src_dir_name = MailTools-$(version)
+doc_dir_name = perl-mailtools-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = dev
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+PERL_PKG_NAME = perl-mailtools
+PERL_PKG_VERSION = 2.21
+PERL_PKG_ARCH = $(TOOLCHAIN)
+PERL_PKG_DISTRO_NAME = $(DISTRO_NAME)
+PERL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+PERL_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+PERL_PKG_SHORT_DESCRIPTION = bundle of ancient email modules
+PERL_PKG_URL = $(BUG_URL)
+PERL_PKG_LICENSE = Artistic-v1.0
+PERL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-description
+PERL_PKG_DESCRIPTION_FILE_IN = $(PERL_PKG_NAME)-pkg-description.in
+PERL_PKG_INSTALL_SCRIPT = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-install.sh
+PERL_PKG_INSTALL_SCRIPT_IN = $(PERL_PKG_NAME)-pkg-install.sh.in
+
+PERL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-package
+
+pkg_basename = $(PERL_PKG_NAME)-$(PERL_PKG_VERSION)-$(PERL_PKG_ARCH)-$(PERL_PKG_DISTRO_NAME)-$(PERL_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(PERL_PKG)
+
+
+#
+# Common Perl5 Environment:
+# ========================
+#
+perl_environment = INSTALLDIRS=vendor
+
+perl_environment += PERL_LIB='$(TARGET_DEST_DIR)/usr/share/perl5'
+perl_environment += PERL_ARCHLIB='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5'
+perl_environment += PERL_INC='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += PERL_INCDEP='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+
+perl_environment += SITELIBEXP='/usr/share/perl5/site_perl'
+perl_environment += SITEARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+perl_environment += VENDORLIBEXP='/usr/share/perl5/vendor_perl'
+perl_environment += VENDORARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += PERLPREFIX='/usr'
+perl_environment += INSTALLPRIVLIB='/usr/share/perl5'
+perl_environment += INSTALLARCHLIB='/usr/lib$(LIBSUFFIX)/perl5'
+
+perl_environment += SITEPREFIX='/usr'
+perl_environment += INSTALLSITELIB='/usr/share/perl5/site_perl'
+perl_environment += INSTALLSITEARCH='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+
+perl_environment += VENDORPREFIX='/usr'
+perl_environment += INSTALLVENDORLIB='/usr/share/perl5/vendor_perl'
+perl_environment += INSTALLVENDORARCH='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += INSTALLBIN='/usr/bin'
+perl_environment += INSTALLSITEBIN='/usr/bin'
+perl_environment += INSTALLVENDORBIN='/usr/bin'
+
+perl_environment += INSTALLSCRIPT='/usr/bin'
+perl_environment += INSTALLSITESCRIPT='/usr/bin'
+perl_environment += INSTALLVENDORSCRIPT='/usr/bin'
+
+perl_environment += INSTALLMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLSITEMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLVENDORMAN1DIR='/usr/share/man/man1'
+
+perl_environment += INSTALLMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLSITEMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLVENDORMAN3DIR='/usr/share/man/man3'
+
+#
+# HW Specific Perl5 Environment:
+# =============================
+#
+suppress-warnings = -Wno-unused-function -Wno-unused-parameter
+
+perl_environment += AR=$(AR)
+perl_environment += RANLIB=$(RANLIB)
+perl_environment += CC='$(CC) --sysroot=$(TARGET_DEST_DIR) $(ARCH_OPTIMIZATION) $(ARCH_FLAGS) $(ARCH_DEFS)'
+perl_environment += LD='$(CC) --sysroot=$(TARGET_DEST_DIR) -shared'
+perl_environment += LDFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCFLAGS='$(CFLAGS) -I$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE $(suppress-warnings)'
+perl_environment += LDDLFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCCDLFLAGS='-fPIC'
+perl_environment += CCDLFLAGS='-Wl,-E -Wl,-rpath,/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += FULL_AR=$(AR)
+perl_environment += OSNAME=linux
+perl_environment += OSVERS=
+perl_environment += LIBC=
+
+#
+# Give the path of target machine PERL headers to the ExtUtils::MakeMaker for creating
+# the PERL_HDRS list in the resulting Makefile created by `perl Makefile.PL` command.
+#
+# see: _perl_header_files() fuction in the MM_Any.pm script to understand PERL_SRC env.
+#
+perl_src_hdrs = PERL_SRC=$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE
+
+#
+# Module Specific Perl5 Environment:
+# =================================
+#
+
+perl_local_pod = usr/lib$(LIBSUFFIX)/perl5/perllocal.pod
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(perl_src_hdrs) $(PERL) Makefile.PL $(perl_environment) ; \
+ )
+ # ======= build the perl-mailtools module =======
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) $(perl_environment) ; \
+ )
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(PERL_PKG)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(perl_environment) $(env_sysroot) ; \
+ )
+ @find $(PERL_PKG) -name '.packlist' -delete
+ @rm -f $(PERL_PKG)/$(perl_local_pod)
+ # ======= Install Documentation =======
+ @if [ -d $(PERL_PKG)/usr/share/man ]; then \
+ ( cd $(PERL_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(CURDIR)/copying/Artistic $(CURDIR)/copying/Copying \
+ $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @cp -a $(CURDIR)/copying/Artistic $(CURDIR)/copying/Copying \
+ $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a examples README* \
+ $(PERL_PKG)/usr/share/doc/$(doc_dir_name) \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r ChangeLog ]; then \
+ DOCSDIR=`echo $(PERL_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat ChangeLog | head -n 1000 > $$DOCSDIR/ChangeLog ; \
+ touch -r ChangeLog $$DOCSDIR/ChangeLog ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(PERL_PKG))
+ @touch $@
+
+$(PERL_PKG_DESCRIPTION_FILE): $(PERL_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(PERL_PKG_INSTALL_SCRIPT): $(PERL_PKG_INSTALL_SCRIPT_IN)
+ @cat $< | $(SED) -e "s,@PERL_LOCAL_POD@,$(perl_local_pod),g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG_INSTALL_SCRIPT)
+ @cp $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG)/.DESCRIPTION
+ @cp $(PERL_PKG_INSTALL_SCRIPT) $(PERL_PKG)/.INSTALL
+ @chmod a+x $(PERL_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(PERL_PKG)/.REQUIRES
+ @echo "pkgname=$(PERL_PKG_NAME)" > $(PERL_PKG)/.PKGINFO ; \
+ echo "pkgver=$(PERL_PKG_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "arch=$(PERL_PKG_ARCH)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distroname=$(PERL_PKG_DISTRO_NAME)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distrover=$(PERL_PKG_DISTRO_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "group=$(PERL_PKG_GROUP)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(PERL_PKG_SHORT_DESCRIPTION)\"" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "url=$(PERL_PKG_URL)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "license=$(PERL_PKG_LICENSE)" >> $(PERL_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(PERL_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: perl-mailtools/2.21/PATCHES
===================================================================
Index: perl-mailtools/2.21/copying/Artistic
===================================================================
--- perl-mailtools/2.21/copying/Artistic (nonexistent)
+++ perl-mailtools/2.21/copying/Artistic (revision 5)
@@ -0,0 +1,131 @@
+
+
+
+
+ The "Artistic License"
+
+ Preamble
+
+The intent of this document is to state the conditions under which a
+Package may be copied, such that the Copyright Holder maintains some
+semblance of artistic control over the development of the package,
+while giving the users of the package the right to use and distribute
+the Package in a more-or-less customary fashion, plus the right to make
+reasonable modifications.
+
+Definitions:
+
+ "Package" refers to the collection of files distributed by the
+ Copyright Holder, and derivatives of that collection of files
+ created through textual modification.
+
+ "Standard Version" refers to such a Package if it has not been
+ modified, or has been modified in accordance with the wishes
+ of the Copyright Holder as specified below.
+
+ "Copyright Holder" is whoever is named in the copyright or
+ copyrights for the package.
+
+ "You" is you, if you're thinking about copying or distributing
+ this Package.
+
+ "Reasonable copying fee" is whatever you can justify on the
+ basis of media cost, duplication charges, time of people involved,
+ and so on. (You will not be required to justify it to the
+ Copyright Holder, but only to the computing community at large
+ as a market that must bear the fee.)
+
+ "Freely Available" means that no fee is charged for the item
+ itself, though there may be fees involved in handling the item.
+ It also means that recipients of the item may redistribute it
+ under the same conditions they received it.
+
+1. You may make and give away verbatim copies of the source form of the
+Standard Version of this Package without restriction, provided that you
+duplicate all of the original copyright notices and associated disclaimers.
+
+2. You may apply bug fixes, portability fixes and other modifications
+derived from the Public Domain or from the Copyright Holder. A Package
+modified in such a way shall still be considered the Standard Version.
+
+3. You may otherwise modify your copy of this Package in any way, provided
+that you insert a prominent notice in each changed file stating how and
+when you changed that file, and provided that you do at least ONE of the
+following:
+
+ a) place your modifications in the Public Domain or otherwise make them
+ Freely Available, such as by posting said modifications to Usenet or
+ an equivalent medium, or placing the modifications on a major archive
+ site such as uunet.uu.net, or by allowing the Copyright Holder to include
+ your modifications in the Standard Version of the Package.
+
+ b) use the modified Package only within your corporation or organization.
+
+ c) rename any non-standard executables so the names do not conflict
+ with standard executables, which must also be provided, and provide
+ a separate manual page for each non-standard executable that clearly
+ documents how it differs from the Standard Version.
+
+ d) make other distribution arrangements with the Copyright Holder.
+
+4. You may distribute the programs of this Package in object code or
+executable form, provided that you do at least ONE of the following:
+
+ a) distribute a Standard Version of the executables and library files,
+ together with instructions (in the manual page or equivalent) on where
+ to get the Standard Version.
+
+ b) accompany the distribution with the machine-readable source of
+ the Package with your modifications.
+
+ c) give non-standard executables non-standard names, and clearly
+ document the differences in manual pages (or equivalent), together
+ with instructions on where to get the Standard Version.
+
+ d) make other distribution arrangements with the Copyright Holder.
+
+5. You may charge a reasonable copying fee for any distribution of this
+Package. You may charge any fee you choose for support of this
+Package. You may not charge a fee for this Package itself. However,
+you may distribute this Package in aggregate with other (possibly
+commercial) programs as part of a larger (possibly commercial) software
+distribution provided that you do not advertise this Package as a
+product of your own. You may embed this Package's interpreter within
+an executable of yours (by linking); this shall be construed as a mere
+form of aggregation, provided that the complete Standard Version of the
+interpreter is so embedded.
+
+6. The scripts and library files supplied as input to or produced as
+output from the programs of this Package do not automatically fall
+under the copyright of this Package, but belong to whoever generated
+them, and may be sold commercially, and may be aggregated with this
+Package. If such scripts or library files are aggregated with this
+Package via the so-called "undump" or "unexec" methods of producing a
+binary executable image, then distribution of such an image shall
+neither be construed as a distribution of this Package nor shall it
+fall under the restrictions of Paragraphs 3 and 4, provided that you do
+not represent such an executable image as a Standard Version of this
+Package.
+
+7. C subroutines (or comparably compiled subroutines in other
+languages) supplied by you and linked into this Package in order to
+emulate subroutines and variables of the language defined by this
+Package shall not be considered part of this Package, but are the
+equivalent of input as in Paragraph 6, provided these subroutines do
+not change the language in any way that would cause it to fail the
+regression tests for the language.
+
+8. Aggregation of this Package with a commercial distribution is always
+permitted provided that the use of this Package is embedded; that is,
+when no overt attempt is made to make this Package's interfaces visible
+to the end user of the commercial distribution. Such use shall not be
+construed as a distribution of this Package.
+
+9. The name of the Copyright Holder may not be used to endorse or promote
+products derived from this software without specific prior written permission.
+
+10. THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+ The End
Index: perl-mailtools/2.21/copying/Copying
===================================================================
--- perl-mailtools/2.21/copying/Copying (nonexistent)
+++ perl-mailtools/2.21/copying/Copying (revision 5)
@@ -0,0 +1,251 @@
+
+ GNU GENERAL PUBLIC LICENSE
+ Version 1, February 1989
+
+ Copyright (C) 1989 Free Software Foundation, Inc.
+ 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The license agreements of most software companies try to keep users
+at the mercy of those companies. By contrast, our General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. The
+General Public License applies to the Free Software Foundation's
+software and to any other program whose authors commit to using it.
+You can use it for your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Specifically, the General Public License is designed to make
+sure that you have the freedom to give away or sell copies of free
+software, that you receive source code or can get it if you want it,
+that you can change the software or use pieces of it in new free
+programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of a such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must tell them their rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License Agreement applies to any program or other work which
+contains a notice placed by the copyright holder saying it may be
+distributed under the terms of this General Public License. The
+"Program", below, refers to any such program or work, and a "work based
+on the Program" means either the Program or any work containing the
+Program or a portion of it, either verbatim or with modifications. Each
+licensee is addressed as "you".
+
+ 1. You may copy and distribute verbatim copies of the Program's source
+code as you receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice and
+disclaimer of warranty; keep intact all the notices that refer to this
+General Public License and to the absence of any warranty; and give any
+other recipients of the Program a copy of this General Public License
+along with the Program. You may charge a fee for the physical act of
+transferring a copy.
+
+ 2. You may modify your copy or copies of the Program or any portion of
+it, and copy and distribute such modifications under the terms of Paragraph
+1 above, provided that you also do the following:
+
+ a) cause the modified files to carry prominent notices stating that
+ you changed the files and the date of any change; and
+
+ b) cause the whole of any work that you distribute or publish, that
+ in whole or in part contains the Program or any part thereof, either
+ with or without modifications, to be licensed at no charge to all
+ third parties under the terms of this General Public License (except
+ that you may choose to grant warranty protection to some or all
+ third parties, at your option).
+
+ c) If the modified program normally reads commands interactively when
+ run, you must cause it, when started running for such interactive use
+ in the simplest and most usual way, to print or display an
+ announcement including an appropriate copyright notice and a notice
+ that there is no warranty (or else, saying that you provide a
+ warranty) and that users may redistribute the program under these
+ conditions, and telling the user how to view a copy of this General
+ Public License.
+
+ d) You may charge a fee for the physical act of transferring a
+ copy, and you may at your option offer warranty protection in
+ exchange for a fee.
+
+Mere aggregation of another independent work with the Program (or its
+derivative) on a volume of a storage or distribution medium does not bring
+the other work under the scope of these terms.
+
+ 3. You may copy and distribute the Program (or a portion or derivative of
+it, under Paragraph 2) in object code or executable form under the terms of
+Paragraphs 1 and 2 above provided that you also do one of the following:
+
+ a) accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of
+ Paragraphs 1 and 2 above; or,
+
+ b) accompany it with a written offer, valid for at least three
+ years, to give any third party free (except for a nominal charge
+ for the cost of distribution) a complete machine-readable copy of the
+ corresponding source code, to be distributed under the terms of
+ Paragraphs 1 and 2 above; or,
+
+ c) accompany it with the information you received as to where the
+ corresponding source code may be obtained. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form alone.)
+
+Source code for a work means the preferred form of the work for making
+modifications to it. For an executable file, complete source code means
+all the source code for all modules it contains; but, as a special
+exception, it need not include source code for modules which are standard
+libraries that accompany the operating system on which the executable
+file runs, or for standard header files or definitions files that
+accompany that operating system.
+
+ 4. You may not copy, modify, sublicense, distribute or transfer the
+Program except as expressly provided under this General Public License.
+Any attempt otherwise to copy, modify, sublicense, distribute or transfer
+the Program is void, and will automatically terminate your rights to use
+the Program under this License. However, parties who have received
+copies, or rights to use copies, from you under this General Public
+License will not have their licenses terminated so long as such parties
+remain in full compliance.
+
+ 5. By copying, distributing or modifying the Program (or any work based
+on the Program) you indicate your acceptance of this license to do so,
+and all its terms and conditions.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the original
+licensor to copy, distribute or modify the Program subject to these
+terms and conditions. You may not impose any further restrictions on the
+recipients' exercise of the rights granted herein.
+
+ 7. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of the license which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+the license, you may choose any version ever published by the Free Software
+Foundation.
+
+ 8. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 9. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 10. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ Appendix: How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to humanity, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these
+terms.
+
+ To do so, attach the following notices to the program. It is safest to
+attach them to the start of each source file to most effectively convey
+the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) 19yy <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 1, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) 19xx name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the
+appropriate parts of the General Public License. Of course, the
+commands you use may be called something other than `show w' and `show
+c'; they could even be mouse-clicks or menu items--whatever suits your
+program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the
+ program `Gnomovision' (a program to direct compilers to make passes
+ at assemblers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+That's all there is to it!
Index: perl-mailtools/2.21/copying
===================================================================
--- perl-mailtools/2.21/copying (nonexistent)
+++ perl-mailtools/2.21/copying (revision 5)
Property changes on: perl-mailtools/2.21/copying
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-mailtools/2.21/perl-mailtools-pkg-description.in
===================================================================
--- perl-mailtools/2.21/perl-mailtools-pkg-description.in (nonexistent)
+++ perl-mailtools/2.21/perl-mailtools-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+perl-mailtools: perl-mailtools @VERSION@ (bundle of ancient email modules)
+perl-mailtools:
+perl-mailtools: MailTools is a bundle: an ancient form of combining packages into
+perl-mailtools: one distribution. Gladly, it can be distributed as if it is a normal
+perl-mailtools: distribution as well.
+perl-mailtools:
+perl-mailtools:
+perl-mailtools:
+perl-mailtools:
+perl-mailtools:
+perl-mailtools:
Index: perl-mailtools/2.21/perl-mailtools-pkg-install.sh.in
===================================================================
--- perl-mailtools/2.21/perl-mailtools-pkg-install.sh.in (nonexistent)
+++ perl-mailtools/2.21/perl-mailtools-pkg-install.sh.in (revision 5)
@@ -0,0 +1,64 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ if ! grep "DBI|" @PERL_LOCAL_POD@ 1> /dev/null 2> /dev/null ; then
+ cat << EOF >> @PERL_LOCAL_POD@
+=head2 Sun Jan 16 15:49:06 2022: C<Module> L<MailTools|MailTools>
+
+=over 4
+
+=item *
+
+C<installed into: /usr/share/perl5/vendor_perl>
+
+=item *
+
+C<LINKTYPE: dynamic>
+
+=item *
+
+C<VERSION: 2.21>
+
+=item *
+
+C<EXE_FILES: >
+
+=back
+
+EOF
+ fi
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: perl-mailtools/2.21/perl-mailtools-pkg-install.sh.in
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: perl-mailtools/2.21
===================================================================
--- perl-mailtools/2.21 (nonexistent)
+++ perl-mailtools/2.21 (revision 5)
Property changes on: perl-mailtools/2.21
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-mailtools
===================================================================
--- perl-mailtools (nonexistent)
+++ perl-mailtools (revision 5)
Property changes on: perl-mailtools
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-net-domain/3.14/Makefile
===================================================================
--- perl-net-domain/3.14/Makefile (nonexistent)
+++ perl-net-domain/3.14/Makefile (revision 5)
@@ -0,0 +1,284 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/d/perl-modules/CPAN/Net-Domain
+
+REQUIRES = dev/perl/5.36.0
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 3.14
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/d/perl-modules/CPAN/Net-Domain/libnet-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/libnet-$(version)
+src_dir_name = libnet-$(version)
+doc_dir_name = perl-net-domain-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = dev
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+PERL_PKG_NAME = perl-net-domain
+PERL_PKG_VERSION = 3.14
+PERL_PKG_ARCH = $(TOOLCHAIN)
+PERL_PKG_DISTRO_NAME = $(DISTRO_NAME)
+PERL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+PERL_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+PERL_PKG_SHORT_DESCRIPTION = Attempt to evaluate the current FQDN
+PERL_PKG_URL = $(BUG_URL)
+PERL_PKG_LICENSE = Artistic-v1.0
+PERL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-description
+PERL_PKG_DESCRIPTION_FILE_IN = $(PERL_PKG_NAME)-pkg-description.in
+PERL_PKG_INSTALL_SCRIPT = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-install.sh
+PERL_PKG_INSTALL_SCRIPT_IN = $(PERL_PKG_NAME)-pkg-install.sh.in
+
+PERL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-package
+
+pkg_basename = $(PERL_PKG_NAME)-$(PERL_PKG_VERSION)-$(PERL_PKG_ARCH)-$(PERL_PKG_DISTRO_NAME)-$(PERL_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(PERL_PKG)
+
+
+#
+# Common Perl5 Environment:
+# ========================
+#
+perl_environment = INSTALLDIRS=vendor
+
+perl_environment += PERL_LIB='$(TARGET_DEST_DIR)/usr/share/perl5'
+perl_environment += PERL_ARCHLIB='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5'
+perl_environment += PERL_INC='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += PERL_INCDEP='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+
+perl_environment += SITELIBEXP='/usr/share/perl5/site_perl'
+perl_environment += SITEARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+perl_environment += VENDORLIBEXP='/usr/share/perl5/vendor_perl'
+perl_environment += VENDORARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += PERLPREFIX='/usr'
+perl_environment += INSTALLPRIVLIB='/usr/share/perl5'
+perl_environment += INSTALLARCHLIB='/usr/lib$(LIBSUFFIX)/perl5'
+
+perl_environment += SITEPREFIX='/usr'
+perl_environment += INSTALLSITELIB='/usr/share/perl5/site_perl'
+perl_environment += INSTALLSITEARCH='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+
+perl_environment += VENDORPREFIX='/usr'
+perl_environment += INSTALLVENDORLIB='/usr/share/perl5/vendor_perl'
+perl_environment += INSTALLVENDORARCH='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += INSTALLBIN='/usr/bin'
+perl_environment += INSTALLSITEBIN='/usr/bin'
+perl_environment += INSTALLVENDORBIN='/usr/bin'
+
+perl_environment += INSTALLSCRIPT='/usr/bin'
+perl_environment += INSTALLSITESCRIPT='/usr/bin'
+perl_environment += INSTALLVENDORSCRIPT='/usr/bin'
+
+perl_environment += INSTALLMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLSITEMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLVENDORMAN1DIR='/usr/share/man/man1'
+
+perl_environment += INSTALLMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLSITEMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLVENDORMAN3DIR='/usr/share/man/man3'
+
+#
+# HW Specific Perl5 Environment:
+# =============================
+#
+suppress-warnings = -Wno-unused-function -Wno-unused-parameter
+
+perl_environment += AR=$(AR)
+perl_environment += RANLIB=$(RANLIB)
+perl_environment += CC='$(CC) --sysroot=$(TARGET_DEST_DIR) $(ARCH_OPTIMIZATION) $(ARCH_FLAGS) $(ARCH_DEFS)'
+perl_environment += LD='$(CC) --sysroot=$(TARGET_DEST_DIR) -shared'
+perl_environment += LDFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCFLAGS='$(CFLAGS) -I$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE $(suppress-warnings)'
+perl_environment += LDDLFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCCDLFLAGS='-fPIC'
+perl_environment += CCDLFLAGS='-Wl,-E -Wl,-rpath,/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += FULL_AR=$(AR)
+perl_environment += OSNAME=linux
+perl_environment += OSVERS=
+perl_environment += LIBC=
+
+#
+# Give the path of target machine PERL headers to the ExtUtils::MakeMaker for creating
+# the PERL_HDRS list in the resulting Makefile created by `perl Makefile.PL` command.
+#
+# see: _perl_header_files() fuction in the MM_Any.pm script to understand PERL_SRC env.
+#
+perl_src_hdrs = PERL_SRC=$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE
+
+#
+# Module Specific Perl5 Environment:
+# =================================
+#
+
+perl_local_pod = usr/lib$(LIBSUFFIX)/perl5/perllocal.pod
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(perl_src_hdrs) NO_NETWORK_TESTING=yes $(PERL) Makefile.PL $(perl_environment) ; \
+ )
+ # ======= build the perl-net-domain module =======
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) $(perl_environment) ; \
+ )
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(PERL_PKG)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(perl_environment) $(env_sysroot) ; \
+ )
+ @find $(PERL_PKG) -name '.packlist' -delete
+ @rm -f $(PERL_PKG)/$(perl_local_pod)
+ # ======= Install Documentation =======
+ @if [ -d $(PERL_PKG)/usr/share/man ]; then \
+ ( cd $(PERL_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(SRC_DIR)/Artistic $(SRC_DIR)/Copying $(SRC_DIR)/LICENCE \
+ $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a demos Artistic INSTALL LICENCE README \
+ $(PERL_PKG)/usr/share/doc/$(doc_dir_name) \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r Changes ]; then \
+ DOCSDIR=`echo $(PERL_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat Changes | head -n 1000 > $$DOCSDIR/Changes ; \
+ touch -r Changes $$DOCSDIR/Changes ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(PERL_PKG))
+ @touch $@
+
+$(PERL_PKG_DESCRIPTION_FILE): $(PERL_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(PERL_PKG_INSTALL_SCRIPT): $(PERL_PKG_INSTALL_SCRIPT_IN)
+ @cat $< | $(SED) -e "s,@PERL_LOCAL_POD@,$(perl_local_pod),g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG_INSTALL_SCRIPT)
+ @cp $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG)/.DESCRIPTION
+ @cp $(PERL_PKG_INSTALL_SCRIPT) $(PERL_PKG)/.INSTALL
+ @chmod a+x $(PERL_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(PERL_PKG)/.REQUIRES
+ @echo "pkgname=$(PERL_PKG_NAME)" > $(PERL_PKG)/.PKGINFO ; \
+ echo "pkgver=$(PERL_PKG_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "arch=$(PERL_PKG_ARCH)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distroname=$(PERL_PKG_DISTRO_NAME)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distrover=$(PERL_PKG_DISTRO_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "group=$(PERL_PKG_GROUP)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(PERL_PKG_SHORT_DESCRIPTION)\"" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "url=$(PERL_PKG_URL)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "license=$(PERL_PKG_LICENSE)" >> $(PERL_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(PERL_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: perl-net-domain/3.14/PATCHES
===================================================================
--- perl-net-domain/3.14/PATCHES (nonexistent)
+++ perl-net-domain/3.14/PATCHES (revision 5)
@@ -0,0 +1,3 @@
+
+../../../../sources/packages/d/perl-modules/CPAN/Net-Domain/patches/libnet-3.14-not-create-cfg.patch -p0
+../../../../sources/packages/d/perl-modules/CPAN/Net-Domain/patches/libnet-3.14-no-network-testing.patch -p0
Index: perl-net-domain/3.14/perl-net-domain-pkg-description.in
===================================================================
--- perl-net-domain/3.14/perl-net-domain-pkg-description.in (nonexistent)
+++ perl-net-domain/3.14/perl-net-domain-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+perl-net-domain: perl-net-domain @VERSION@ (Attempt to evaluate the current FQDN)
+perl-net-domain:
+perl-net-domain: Net::Domain - Attempt to evaluate the current host's internet name
+perl-net-domain: and domain.
+perl-net-domain:
+perl-net-domain: Using various methods attempt to find the Fully Qualified Domain
+perl-net-domain: Name (FQDN) of the current host. From this determine the host-name
+perl-net-domain: and the host-domain.
+perl-net-domain:
+perl-net-domain:
+perl-net-domain:
Index: perl-net-domain/3.14/perl-net-domain-pkg-install.sh.in
===================================================================
--- perl-net-domain/3.14/perl-net-domain-pkg-install.sh.in (nonexistent)
+++ perl-net-domain/3.14/perl-net-domain-pkg-install.sh.in (revision 5)
@@ -0,0 +1,64 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ if ! grep "DBI|" @PERL_LOCAL_POD@ 1> /dev/null 2> /dev/null ; then
+ cat << EOF >> @PERL_LOCAL_POD@
+=head2 Sun Jan 16 14:36:47 2022: C<Module> L<Net|Net>
+
+=over 4
+
+=item *
+
+C<installed into: /usr/share/perl5/vendor_perl>
+
+=item *
+
+C<LINKTYPE: dynamic>
+
+=item *
+
+C<VERSION: 3.14>
+
+=item *
+
+C<EXE_FILES: >
+
+=back
+
+EOF
+ fi
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: perl-net-domain/3.14/perl-net-domain-pkg-install.sh.in
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: perl-net-domain/3.14
===================================================================
--- perl-net-domain/3.14 (nonexistent)
+++ perl-net-domain/3.14 (revision 5)
Property changes on: perl-net-domain/3.14
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-net-domain
===================================================================
--- perl-net-domain (nonexistent)
+++ perl-net-domain (revision 5)
Property changes on: perl-net-domain
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-time-date/0.05/Makefile
===================================================================
--- perl-time-date/0.05/Makefile (nonexistent)
+++ perl-time-date/0.05/Makefile (revision 5)
@@ -0,0 +1,285 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/d/perl-modules/CPAN/Time-Date
+
+REQUIRES = dev/perl/5.36.0
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 0.05
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/d/perl-modules/CPAN/Time-Date/Time-Date-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/Time-Date-$(version)
+src_dir_name = Time-Date-$(version)
+doc_dir_name = perl-time-date-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = dev
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+PERL_PKG_NAME = perl-time-date
+PERL_PKG_VERSION = 0.05
+PERL_PKG_ARCH = $(TOOLCHAIN)
+PERL_PKG_DISTRO_NAME = $(DISTRO_NAME)
+PERL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+PERL_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+PERL_PKG_SHORT_DESCRIPTION = A time and date object for Perl
+PERL_PKG_URL = $(BUG_URL)
+PERL_PKG_LICENSE = GPLv1
+PERL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-description
+PERL_PKG_DESCRIPTION_FILE_IN = $(PERL_PKG_NAME)-pkg-description.in
+PERL_PKG_INSTALL_SCRIPT = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-install.sh
+PERL_PKG_INSTALL_SCRIPT_IN = $(PERL_PKG_NAME)-pkg-install.sh.in
+
+PERL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-package
+
+pkg_basename = $(PERL_PKG_NAME)-$(PERL_PKG_VERSION)-$(PERL_PKG_ARCH)-$(PERL_PKG_DISTRO_NAME)-$(PERL_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(PERL_PKG)
+
+
+#
+# Common Perl5 Environment:
+# ========================
+#
+perl_environment = INSTALLDIRS=vendor
+
+perl_environment += PERL_LIB='$(TARGET_DEST_DIR)/usr/share/perl5'
+perl_environment += PERL_ARCHLIB='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5'
+perl_environment += PERL_INC='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += PERL_INCDEP='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+
+perl_environment += SITELIBEXP='/usr/share/perl5/site_perl'
+perl_environment += SITEARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+perl_environment += VENDORLIBEXP='/usr/share/perl5/vendor_perl'
+perl_environment += VENDORARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += PERLPREFIX='/usr'
+perl_environment += INSTALLPRIVLIB='/usr/share/perl5'
+perl_environment += INSTALLARCHLIB='/usr/lib$(LIBSUFFIX)/perl5'
+
+perl_environment += SITEPREFIX='/usr'
+perl_environment += INSTALLSITELIB='/usr/share/perl5/site_perl'
+perl_environment += INSTALLSITEARCH='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+
+perl_environment += VENDORPREFIX='/usr'
+perl_environment += INSTALLVENDORLIB='/usr/share/perl5/vendor_perl'
+perl_environment += INSTALLVENDORARCH='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += INSTALLBIN='/usr/bin'
+perl_environment += INSTALLSITEBIN='/usr/bin'
+perl_environment += INSTALLVENDORBIN='/usr/bin'
+
+perl_environment += INSTALLSCRIPT='/usr/bin'
+perl_environment += INSTALLSITESCRIPT='/usr/bin'
+perl_environment += INSTALLVENDORSCRIPT='/usr/bin'
+
+perl_environment += INSTALLMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLSITEMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLVENDORMAN1DIR='/usr/share/man/man1'
+
+perl_environment += INSTALLMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLSITEMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLVENDORMAN3DIR='/usr/share/man/man3'
+
+#
+# HW Specific Perl5 Environment:
+# =============================
+#
+suppress-warnings = -Wno-unused-function -Wno-unused-parameter
+
+perl_environment += AR=$(AR)
+perl_environment += RANLIB=$(RANLIB)
+perl_environment += CC='$(CC) --sysroot=$(TARGET_DEST_DIR) $(ARCH_OPTIMIZATION) $(ARCH_FLAGS) $(ARCH_DEFS)'
+perl_environment += LD='$(CC) --sysroot=$(TARGET_DEST_DIR) -shared'
+perl_environment += LDFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCFLAGS='$(CFLAGS) -I$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE $(suppress-warnings)'
+perl_environment += LDDLFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCCDLFLAGS='-fPIC'
+perl_environment += CCDLFLAGS='-Wl,-E -Wl,-rpath,/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += FULL_AR=$(AR)
+perl_environment += OSNAME=linux
+perl_environment += OSVERS=
+perl_environment += LIBC=
+
+#
+# Give the path of target machine PERL headers to the ExtUtils::MakeMaker for creating
+# the PERL_HDRS list in the resulting Makefile created by `perl Makefile.PL` command.
+#
+# see: _perl_header_files() fuction in the MM_Any.pm script to understand PERL_SRC env.
+#
+perl_src_hdrs = PERL_SRC=$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE
+perl_src_hdrs += LANG=
+
+#
+# Module Specific Perl5 Environment:
+# =================================
+#
+
+perl_local_pod = usr/lib$(LIBSUFFIX)/perl5/perllocal.pod
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(perl_src_hdrs) $(PERL) Makefile.PL $(perl_environment) ; \
+ )
+ # ======= build the perl-time-date module =======
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) $(perl_environment) ; \
+ )
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(PERL_PKG)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(perl_environment) $(env_sysroot) ; \
+ )
+ @find $(PERL_PKG) -name '.packlist' -delete
+ @rm -f $(PERL_PKG)/$(perl_local_pod)
+ # ======= Install Documentation =======
+ @if [ -d $(PERL_PKG)/usr/share/man ]; then \
+ ( cd $(PERL_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(CURDIR)/copying/LICENSE $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @cp -a $(CURDIR)/copying/LICENSE $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a README \
+ $(PERL_PKG)/usr/share/doc/$(doc_dir_name) \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r Changes ]; then \
+ DOCSDIR=`echo $(PERL_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat Changes | head -n 1000 > $$DOCSDIR/Changes ; \
+ touch -r Changes $$DOCSDIR/Changes ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(PERL_PKG))
+ @touch $@
+
+$(PERL_PKG_DESCRIPTION_FILE): $(PERL_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(PERL_PKG_INSTALL_SCRIPT): $(PERL_PKG_INSTALL_SCRIPT_IN)
+ @cat $< | $(SED) -e "s,@PERL_LOCAL_POD@,$(perl_local_pod),g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG_INSTALL_SCRIPT)
+ @cp $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG)/.DESCRIPTION
+ @cp $(PERL_PKG_INSTALL_SCRIPT) $(PERL_PKG)/.INSTALL
+ @chmod a+x $(PERL_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(PERL_PKG)/.REQUIRES
+ @echo "pkgname=$(PERL_PKG_NAME)" > $(PERL_PKG)/.PKGINFO ; \
+ echo "pkgver=$(PERL_PKG_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "arch=$(PERL_PKG_ARCH)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distroname=$(PERL_PKG_DISTRO_NAME)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distrover=$(PERL_PKG_DISTRO_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "group=$(PERL_PKG_GROUP)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(PERL_PKG_SHORT_DESCRIPTION)\"" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "url=$(PERL_PKG_URL)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "license=$(PERL_PKG_LICENSE)" >> $(PERL_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(PERL_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: perl-time-date/0.05/PATCHES
===================================================================
Index: perl-time-date/0.05/copying/LICENSE
===================================================================
--- perl-time-date/0.05/copying/LICENSE (nonexistent)
+++ perl-time-date/0.05/copying/LICENSE (revision 5)
@@ -0,0 +1,362 @@
+
+ The GNU General Public License, Version 1, February 1989
+
+ GNU GENERAL PUBLIC LICENSE
+ Version 1, February 1989
+
+ Copyright (C) 1989 Free Software Foundation, Inc.
+ 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The license agreements of most software companies try to keep users
+at the mercy of those companies. By contrast, our General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. The
+General Public License applies to the Free Software Foundation's
+software and to any other program whose authors commit to using it.
+You can use it for your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Specifically, the General Public License is designed to make
+sure that you have the freedom to give away or sell copies of free
+software, that you receive source code or can get it if you want it,
+that you can change the software or use pieces of it in new free
+programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of a such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must tell them their rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License Agreement applies to any program or other work which
+contains a notice placed by the copyright holder saying it may be
+distributed under the terms of this General Public License. The
+"Program", below, refers to any such program or work, and a "work based
+on the Program" means either the Program or any work containing the
+Program or a portion of it, either verbatim or with modifications. Each
+licensee is addressed as "you".
+
+ 1. You may copy and distribute verbatim copies of the Program's source
+code as you receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice and
+disclaimer of warranty; keep intact all the notices that refer to this
+General Public License and to the absence of any warranty; and give any
+other recipients of the Program a copy of this General Public License
+along with the Program. You may charge a fee for the physical act of
+transferring a copy.
+
+ 2. You may modify your copy or copies of the Program or any portion of
+it, and copy and distribute such modifications under the terms of Paragraph
+1 above, provided that you also do the following:
+
+ a) cause the modified files to carry prominent notices stating that
+ you changed the files and the date of any change; and
+
+ b) cause the whole of any work that you distribute or publish, that
+ in whole or in part contains the Program or any part thereof, either
+ with or without modifications, to be licensed at no charge to all
+ third parties under the terms of this General Public License (except
+ that you may choose to grant warranty protection to some or all
+ third parties, at your option).
+
+ c) If the modified program normally reads commands interactively when
+ run, you must cause it, when started running for such interactive use
+ in the simplest and most usual way, to print or display an
+ announcement including an appropriate copyright notice and a notice
+ that there is no warranty (or else, saying that you provide a
+ warranty) and that users may redistribute the program under these
+ conditions, and telling the user how to view a copy of this General
+ Public License.
+
+ d) You may charge a fee for the physical act of transferring a
+ copy, and you may at your option offer warranty protection in
+ exchange for a fee.
+
+Mere aggregation of another independent work with the Program (or its
+derivative) on a volume of a storage or distribution medium does not bring
+the other work under the scope of these terms.
+
+ 3. You may copy and distribute the Program (or a portion or derivative of
+it, under Paragraph 2) in object code or executable form under the terms of
+Paragraphs 1 and 2 above provided that you also do one of the following:
+
+ a) accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of
+ Paragraphs 1 and 2 above; or,
+
+ b) accompany it with a written offer, valid for at least three
+ years, to give any third party free (except for a nominal charge
+ for the cost of distribution) a complete machine-readable copy of the
+ corresponding source code, to be distributed under the terms of
+ Paragraphs 1 and 2 above; or,
+
+ c) accompany it with the information you received as to where the
+ corresponding source code may be obtained. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form alone.)
+
+Source code for a work means the preferred form of the work for making
+modifications to it. For an executable file, complete source code means
+all the source code for all modules it contains; but, as a special
+exception, it need not include source code for modules which are standard
+libraries that accompany the operating system on which the executable
+file runs, or for standard header files or definitions files that
+accompany that operating system.
+
+ 4. You may not copy, modify, sublicense, distribute or transfer the
+Program except as expressly provided under this General Public License.
+Any attempt otherwise to copy, modify, sublicense, distribute or transfer
+the Program is void, and will automatically terminate your rights to use
+the Program under this License. However, parties who have received
+copies, or rights to use copies, from you under this General Public
+License will not have their licenses terminated so long as such parties
+remain in full compliance.
+
+ 5. By copying, distributing or modifying the Program (or any work based
+on the Program) you indicate your acceptance of this license to do so,
+and all its terms and conditions.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the original
+licensor to copy, distribute or modify the Program subject to these
+terms and conditions. You may not impose any further restrictions on the
+recipients' exercise of the rights granted herein.
+
+ 7. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of the license which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+the license, you may choose any version ever published by the Free Software
+Foundation.
+
+ 8. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 9. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 10. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ Appendix: How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to humanity, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these
+terms.
+
+ To do so, attach the following notices to the program. It is safest to
+attach them to the start of each source file to most effectively convey
+the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) 19yy <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 1, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) 19xx name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the
+appropriate parts of the General Public License. Of course, the
+commands you use may be called something other than `show w' and `show
+c'; they could even be mouse-clicks or menu items--whatever suits your
+program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the
+ program `Gnomovision' (a program to direct compilers to make passes
+ at assemblers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+That's all there is to it!
+
+
+--- The Artistic License 1.0 ---
+
+This software is Copyright (c) 1998 by Gisle Aas.
+
+This is free software, licensed under:
+
+ The Artistic License 1.0
+
+The Artistic License
+
+Preamble
+
+The intent of this document is to state the conditions under which a Package
+may be copied, such that the Copyright Holder maintains some semblance of
+artistic control over the development of the package, while giving the users of
+the package the right to use and distribute the Package in a more-or-less
+customary fashion, plus the right to make reasonable modifications.
+
+Definitions:
+
+ - "Package" refers to the collection of files distributed by the Copyright
+ Holder, and derivatives of that collection of files created through
+ textual modification.
+ - "Standard Version" refers to such a Package if it has not been modified,
+ or has been modified in accordance with the wishes of the Copyright
+ Holder.
+ - "Copyright Holder" is whoever is named in the copyright or copyrights for
+ the package.
+ - "You" is you, if you're thinking about copying or distributing this Package.
+ - "Reasonable copying fee" is whatever you can justify on the basis of media
+ cost, duplication charges, time of people involved, and so on. (You will
+ not be required to justify it to the Copyright Holder, but only to the
+ computing community at large as a market that must bear the fee.)
+ - "Freely Available" means that no fee is charged for the item itself, though
+ there may be fees involved in handling the item. It also means that
+ recipients of the item may redistribute it under the same conditions they
+ received it.
+
+1. You may make and give away verbatim copies of the source form of the
+Standard Version of this Package without restriction, provided that you
+duplicate all of the original copyright notices and associated disclaimers.
+
+2. You may apply bug fixes, portability fixes and other modifications derived
+from the Public Domain or from the Copyright Holder. A Package modified in such
+a way shall still be considered the Standard Version.
+
+3. You may otherwise modify your copy of this Package in any way, provided that
+you insert a prominent notice in each changed file stating how and when you
+changed that file, and provided that you do at least ONE of the following:
+
+ a) place your modifications in the Public Domain or otherwise make them
+ Freely Available, such as by posting said modifications to Usenet or an
+ equivalent medium, or placing the modifications on a major archive site
+ such as ftp.uu.net, or by allowing the Copyright Holder to include your
+ modifications in the Standard Version of the Package.
+
+ b) use the modified Package only within your corporation or organization.
+
+ c) rename any non-standard executables so the names do not conflict with
+ standard executables, which must also be provided, and provide a separate
+ manual page for each non-standard executable that clearly documents how it
+ differs from the Standard Version.
+
+ d) make other distribution arrangements with the Copyright Holder.
+
+4. You may distribute the programs of this Package in object code or executable
+form, provided that you do at least ONE of the following:
+
+ a) distribute a Standard Version of the executables and library files,
+ together with instructions (in the manual page or equivalent) on where to
+ get the Standard Version.
+
+ b) accompany the distribution with the machine-readable source of the Package
+ with your modifications.
+
+ c) accompany any non-standard executables with their corresponding Standard
+ Version executables, giving the non-standard executables non-standard
+ names, and clearly documenting the differences in manual pages (or
+ equivalent), together with instructions on where to get the Standard
+ Version.
+
+ d) make other distribution arrangements with the Copyright Holder.
+
+5. You may charge a reasonable copying fee for any distribution of this
+Package. You may charge any fee you choose for support of this Package. You
+may not charge a fee for this Package itself. However, you may distribute this
+Package in aggregate with other (possibly commercial) programs as part of a
+larger (possibly commercial) software distribution provided that you do not
+advertise this Package as a product of your own.
+
+6. The scripts and library files supplied as input to or produced as output
+from the programs of this Package do not automatically fall under the copyright
+of this Package, but belong to whomever generated them, and may be sold
+commercially, and may be aggregated with this Package.
+
+7. C or perl subroutines supplied by you and linked into this Package shall not
+be considered part of this Package.
+
+8. The name of the Copyright Holder may not be used to endorse or promote
+products derived from this software without specific prior written permission.
+
+9. THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
+WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+The End
+
Index: perl-time-date/0.05/copying
===================================================================
--- perl-time-date/0.05/copying (nonexistent)
+++ perl-time-date/0.05/copying (revision 5)
Property changes on: perl-time-date/0.05/copying
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-time-date/0.05/perl-time-date-pkg-description.in
===================================================================
--- perl-time-date/0.05/perl-time-date-pkg-description.in (nonexistent)
+++ perl-time-date/0.05/perl-time-date-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+perl-time-date: perl-time-date @VERSION@ (A time and date object for Perl)
+perl-time-date:
+perl-time-date: Time::Date is a class that can be used to represent a date as an
+perl-time-date: object. Unlike other modules, this one just stores a Unix epoch
+perl-time-date: within the object and relies heavily on the underlying operating
+perl-time-date: system so it's very fast. It provides functionality for working
+perl-time-date: with common representations of dates, displaying dates naturally
+perl-time-date: (like "5 minutes ago"), and for listing timezones. Also, it will
+perl-time-date: stringify automatically if you use the object in a string.
+perl-time-date:
+perl-time-date:
Index: perl-time-date/0.05/perl-time-date-pkg-install.sh.in
===================================================================
--- perl-time-date/0.05/perl-time-date-pkg-install.sh.in (nonexistent)
+++ perl-time-date/0.05/perl-time-date-pkg-install.sh.in (revision 5)
@@ -0,0 +1,64 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ if ! grep "Locale::gettext|" @PERL_LOCAL_POD@ 1> /dev/null 2> /dev/null ; then
+ cat << EOF >> @PERL_LOCAL_POD@
+=head2 Sun Jan 16 12:16:59 2022: C<Module> L<Time::Date|Time::Date>
+
+=over 4
+
+=item *
+
+C<installed into: /usr/share/perl5/vendor_perl>
+
+=item *
+
+C<LINKTYPE: dynamic>
+
+=item *
+
+C<VERSION: 0.05>
+
+=item *
+
+C<EXE_FILES: >
+
+=back
+
+EOF
+ fi
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: perl-time-date/0.05/perl-time-date-pkg-install.sh.in
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: perl-time-date/0.05
===================================================================
--- perl-time-date/0.05 (nonexistent)
+++ perl-time-date/0.05 (revision 5)
Property changes on: perl-time-date/0.05
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-time-date
===================================================================
--- perl-time-date (nonexistent)
+++ perl-time-date (revision 5)
Property changes on: perl-time-date
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-uri/5.16/Makefile
===================================================================
--- perl-uri/5.16/Makefile (nonexistent)
+++ perl-uri/5.16/Makefile (revision 5)
@@ -0,0 +1,284 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/d/perl-modules/CPAN/URI
+
+REQUIRES = dev/perl/5.36.0
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 5.16
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/d/perl-modules/CPAN/URI/URI-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/URI-$(version)
+src_dir_name = URI-$(version)
+doc_dir_name = perl-uri-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = dev
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+PERL_PKG_NAME = perl-uri
+PERL_PKG_VERSION = 5.16
+PERL_PKG_ARCH = $(TOOLCHAIN)
+PERL_PKG_DISTRO_NAME = $(DISTRO_NAME)
+PERL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+PERL_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+PERL_PKG_SHORT_DESCRIPTION = Uniform Resource Identifiers
+PERL_PKG_URL = $(BUG_URL)
+PERL_PKG_LICENSE = GPLv1
+PERL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-description
+PERL_PKG_DESCRIPTION_FILE_IN = $(PERL_PKG_NAME)-pkg-description.in
+PERL_PKG_INSTALL_SCRIPT = $(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-pkg-install.sh
+PERL_PKG_INSTALL_SCRIPT_IN = $(PERL_PKG_NAME)-pkg-install.sh.in
+
+PERL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(PERL_PKG_NAME)-package
+
+pkg_basename = $(PERL_PKG_NAME)-$(PERL_PKG_VERSION)-$(PERL_PKG_ARCH)-$(PERL_PKG_DISTRO_NAME)-$(PERL_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(PERL_PKG)
+
+
+#
+# Common Perl5 Environment:
+# ========================
+#
+perl_environment = INSTALLDIRS=vendor
+
+perl_environment += PERL_LIB='$(TARGET_DEST_DIR)/usr/share/perl5'
+perl_environment += PERL_ARCHLIB='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5'
+perl_environment += PERL_INC='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += PERL_INCDEP='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+
+perl_environment += SITELIBEXP='/usr/share/perl5/site_perl'
+perl_environment += SITEARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+perl_environment += VENDORLIBEXP='/usr/share/perl5/vendor_perl'
+perl_environment += VENDORARCHEXP='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += PERLPREFIX='/usr'
+perl_environment += INSTALLPRIVLIB='/usr/share/perl5'
+perl_environment += INSTALLARCHLIB='/usr/lib$(LIBSUFFIX)/perl5'
+
+perl_environment += SITEPREFIX='/usr'
+perl_environment += INSTALLSITELIB='/usr/share/perl5/site_perl'
+perl_environment += INSTALLSITEARCH='/usr/lib$(LIBSUFFIX)/perl5/site_perl'
+
+perl_environment += VENDORPREFIX='/usr'
+perl_environment += INSTALLVENDORLIB='/usr/share/perl5/vendor_perl'
+perl_environment += INSTALLVENDORARCH='/usr/lib$(LIBSUFFIX)/perl5/vendor_perl'
+
+perl_environment += INSTALLBIN='/usr/bin'
+perl_environment += INSTALLSITEBIN='/usr/bin'
+perl_environment += INSTALLVENDORBIN='/usr/bin'
+
+perl_environment += INSTALLSCRIPT='/usr/bin'
+perl_environment += INSTALLSITESCRIPT='/usr/bin'
+perl_environment += INSTALLVENDORSCRIPT='/usr/bin'
+
+perl_environment += INSTALLMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLSITEMAN1DIR='/usr/share/man/man1'
+perl_environment += INSTALLVENDORMAN1DIR='/usr/share/man/man1'
+
+perl_environment += INSTALLMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLSITEMAN3DIR='/usr/share/man/man3'
+perl_environment += INSTALLVENDORMAN3DIR='/usr/share/man/man3'
+
+#
+# HW Specific Perl5 Environment:
+# =============================
+#
+suppress-warnings = -Wno-unused-function -Wno-unused-parameter
+
+perl_environment += AR=$(AR)
+perl_environment += RANLIB=$(RANLIB)
+perl_environment += CC='$(CC) --sysroot=$(TARGET_DEST_DIR) $(ARCH_OPTIMIZATION) $(ARCH_FLAGS) $(ARCH_DEFS)'
+perl_environment += LD='$(CC) --sysroot=$(TARGET_DEST_DIR) -shared'
+perl_environment += LDFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCFLAGS='$(CFLAGS) -I$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE $(suppress-warnings)'
+perl_environment += LDDLFLAGS='$(LDFLAGS) -L$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += CCCDLFLAGS='-fPIC'
+perl_environment += CCDLFLAGS='-Wl,-E -Wl,-rpath,/usr/lib$(LIBSUFFIX)/perl5/CORE'
+perl_environment += FULL_AR=$(AR)
+perl_environment += OSNAME=linux
+perl_environment += OSVERS=
+perl_environment += LIBC=
+
+#
+# Give the path of target machine PERL headers to the ExtUtils::MakeMaker for creating
+# the PERL_HDRS list in the resulting Makefile created by `perl Makefile.PL` command.
+#
+# see: _perl_header_files() fuction in the MM_Any.pm script to understand PERL_SRC env.
+#
+perl_src_hdrs = PERL_SRC=$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/perl5/CORE
+
+#
+# Module Specific Perl5 Environment:
+# =================================
+#
+
+perl_local_pod = usr/lib$(LIBSUFFIX)/perl5/perllocal.pod
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(perl_src_hdrs) $(PERL) Makefile.PL $(perl_environment) ; \
+ )
+ # ======= build the perl-uri module =======
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) $(perl_environment) ; \
+ )
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(PERL_PKG)
+ @( cd $(SRC_DIR) ; \
+ $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(perl_environment) $(env_sysroot) ; \
+ )
+ @find $(PERL_PKG) -name '.packlist' -delete
+ @rm -f $(PERL_PKG)/$(perl_local_pod)
+ # ======= Install Documentation =======
+ @if [ -d $(PERL_PKG)/usr/share/man ]; then \
+ ( cd $(PERL_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(SRC_DIR)/LICENSE \
+ $(PERL_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(PERL_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a LICENSE README \
+ $(PERL_PKG)/usr/share/doc/$(doc_dir_name) \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r Changes ]; then \
+ DOCSDIR=`echo $(PERL_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat Changes | head -n 1000 > $$DOCSDIR/Changes ; \
+ touch -r Changes $$DOCSDIR/Changes ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(PERL_PKG))
+ @touch $@
+
+$(PERL_PKG_DESCRIPTION_FILE): $(PERL_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(PERL_PKG_INSTALL_SCRIPT): $(PERL_PKG_INSTALL_SCRIPT_IN)
+ @cat $< | $(SED) -e "s,@PERL_LOCAL_POD@,$(perl_local_pod),g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG_INSTALL_SCRIPT)
+ @cp $(PERL_PKG_DESCRIPTION_FILE) $(PERL_PKG)/.DESCRIPTION
+ @cp $(PERL_PKG_INSTALL_SCRIPT) $(PERL_PKG)/.INSTALL
+ @chmod a+x $(PERL_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(PERL_PKG)/.REQUIRES
+ @echo "pkgname=$(PERL_PKG_NAME)" > $(PERL_PKG)/.PKGINFO ; \
+ echo "pkgver=$(PERL_PKG_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "arch=$(PERL_PKG_ARCH)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distroname=$(PERL_PKG_DISTRO_NAME)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "distrover=$(PERL_PKG_DISTRO_VERSION)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "group=$(PERL_PKG_GROUP)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(PERL_PKG_SHORT_DESCRIPTION)\"" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "url=$(PERL_PKG_URL)" >> $(PERL_PKG)/.PKGINFO ; \
+ echo "license=$(PERL_PKG_LICENSE)" >> $(PERL_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(PERL_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: perl-uri/5.16/PATCHES
===================================================================
Index: perl-uri/5.16/perl-uri-pkg-description.in
===================================================================
--- perl-uri/5.16/perl-uri-pkg-description.in (nonexistent)
+++ perl-uri/5.16/perl-uri-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+perl-uri: perl-uri @VERSION@ (Uniform Resource Identifiers)
+perl-uri:
+perl-uri: This module implements the "URI" class. Objects of this class
+perl-uri: represent "Uniform Resource Identifier references" as specified
+perl-uri: in RFC 2396 (and updated by RFC 2732).
+perl-uri:
+perl-uri:
+perl-uri:
+perl-uri:
+perl-uri:
+perl-uri:
Index: perl-uri/5.16/perl-uri-pkg-install.sh.in
===================================================================
--- perl-uri/5.16/perl-uri-pkg-install.sh.in (nonexistent)
+++ perl-uri/5.16/perl-uri-pkg-install.sh.in (revision 5)
@@ -0,0 +1,64 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ if ! grep "URI|" @PERL_LOCAL_POD@ 1> /dev/null 2> /dev/null ; then
+ cat << EOF >> @PERL_LOCAL_POD@
+=head2 Sun Jan 16 11:10:58 2022: C<Module> L<URI|URI>
+
+=over 4
+
+=item *
+
+C<installed into: /usr/share/perl5/vendor_perl>
+
+=item *
+
+C<LINKTYPE: dynamic>
+
+=item *
+
+C<VERSION: 5.16>
+
+=item *
+
+C<EXE_FILES: >
+
+=back
+
+EOF
+ fi
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: perl-uri/5.16/perl-uri-pkg-install.sh.in
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: perl-uri/5.16
===================================================================
--- perl-uri/5.16 (nonexistent)
+++ perl-uri/5.16 (revision 5)
Property changes on: perl-uri/5.16
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: perl-uri
===================================================================
--- perl-uri (nonexistent)
+++ perl-uri (revision 5)
Property changes on: perl-uri
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: .
===================================================================
--- . (nonexistent)
+++ . (revision 5)
Property changes on: .
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
383 Commits
1 Branch
1 Tag