Index: 0.2.11/Makefile
===================================================================
--- 0.2.11/Makefile (nonexistent)
+++ 0.2.11/Makefile (revision 5)
@@ -0,0 +1,273 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/libieee1284
+
+REQUIRES = dev/python2/2.7.18
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 0.2.11
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/libieee1284/libieee1284-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/libieee1284-$(version)
+src_dir_name = libieee1284-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = libs
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+IEEE1284_PKG_NAME = libieee1284
+IEEE1284_PKG_VERSION = 0.2.11
+IEEE1284_PKG_ARCH = $(PKGARCH)
+IEEE1284_PKG_DISTRO_NAME = $(DISTRO_NAME)
+IEEE1284_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+IEEE1284_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+IEEE1284_PKG_SHORT_DESCRIPTION = parallel port library
+IEEE1284_PKG_URL = $(BUG_URL)
+IEEE1284_PKG_LICENSE = GPLv2
+IEEE1284_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(IEEE1284_PKG_NAME)-pkg-description
+IEEE1284_PKG_DESCRIPTION_FILE_IN = $(IEEE1284_PKG_NAME)-pkg-description.in
+IEEE1284_PKG_INSTALL_SCRIPT = $(IEEE1284_PKG_NAME)-pkg-install.sh
+
+IEEE1284_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(IEEE1284_PKG_NAME)-package
+
+pkg_basename = $(IEEE1284_PKG_NAME)-$(IEEE1284_PKG_VERSION)-$(IEEE1284_PKG_ARCH)-$(IEEE1284_PKG_DISTRO_NAME)-$(IEEE1284_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(IEEE1284_PKG)
+
+
+extra_configure_switches = --libdir=/usr/lib$(LIBSUFFIX)
+extra_configure_switches += --infodir=/usr/share/info
+extra_configure_switches += --mandir=/usr/share/man
+extra_configure_switches += --disable-dependency-tracking
+
+extra_configure_switches += --sysconfdir=/etc
+
+extra_configure_switches += --with-python
+
+extra_configure_switches += --program-prefix=''
+extra_configure_switches += --program-suffix=''
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+PYTHON_VERSION = 2.7
+
+python_environment = am_cv_python_version=$(PYTHON_VERSION)
+python_environment += am_cv_python_platform=linux2
+python_environment += PYTHON_INCLUDES=-I$(TARGET_DEST_DIR)/usr/include/python$(PYTHON_VERSION)
+python_environment += src_ieee1284module_la_CFLAGS='-I$(TARGET_DEST_DIR)/usr/include/python$(PYTHON_VERSION) -fpic'
+python_environment += am_cv_python_pythondir=/usr/lib$(LIBSUFFIX)/python$(PYTHON_VERSION)/site-packages
+python_environment += am_cv_python_pyexecdir=/usr/lib$(LIBSUFFIX)/python$(PYTHON_VERSION)/site-packages
+
+#
+# Path to Python.h
+#
+CFLAGS += -I$(TARGET_DEST_DIR)/usr/include/python$(PYTHON_VERSION)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @( cd $(SRC_DIR) ; \
+ ./bootstrap ; \
+ )
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @cd $(build_dir) && \
+ $(BUILD_ENVIRONMENT) $(python_environment) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET) \
+ $(extra_configure_switches)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE) $(python_environment)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(IEEE1284_PKG)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(env_sysroot)
+ # ======= Install Documentation =======
+ @( cd $(IEEE1284_PKG)/usr/share/man/man3 ; \
+ for file in *.3 ; do \
+ ln=`head -n 1 $$file` ; \
+ if [ "`echo $$ln | grep '^\.so '`" != "" ] ; then \
+ origin=`echo $$ln | cut -f 2 -d ' '` ; \
+ origin=`basename $$origin` ; \
+ rm -f $$file ; \
+ ln -sf $$origin $$file ; \
+ fi ; \
+ done ; \
+ )
+ @if [ -d $(IEEE1284_PKG)/usr/share/man ]; then \
+ ( cd $(IEEE1284_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(IEEE1284_PKG)/usr/doc/$(src_dir_name)
+ @cp -a $(SRC_DIR)/AUTHORS \
+ $(IEEE1284_PKG)/usr/doc/$(src_dir_name)
+ @mkdir -p $(IEEE1284_PKG)/usr/share/doc/$(src_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a AUTHORS INSTALL NEWS README TODO \
+ $(IEEE1284_PKG)/usr/share/doc/$(src_dir_name) ; \
+ )
+ @cp $(CURDIR)/licenses/COPYING $(IEEE1284_PKG)/usr/doc/$(src_dir_name)
+ @cp $(CURDIR)/licenses/COPYING $(IEEE1284_PKG)/usr/share/doc/$(src_dir_name)
+ @( cd $(SRC_DIR) ; \
+ if [ -r ChangeLog ]; then \
+ DOCSDIR=`echo $(IEEE1284_PKG)/usr/share/doc/$(src_dir_name)` ; \
+ cat ChangeLog | head -n 1000 > $$DOCSDIR/ChangeLog ; \
+ touch -r ChangeLog $$DOCSDIR/ChangeLog ; \
+ fi \
+ )
+ # ======= remove toolchain path from target libtool *.la files =======
+ @( cd $(IEEE1284_PKG)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libieee1284.la ; \
+ )
+ @( cd $(IEEE1284_PKG)/usr/lib$(LIBSUFFIX)/python$(PYTHON_VERSION)/site-packages ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" ieee1284module.la ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(IEEE1284_PKG))
+ # ======= tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libieee1284.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libieee1284.la ; \
+ )
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/python$(PYTHON_VERSION)/site-packages ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" ieee1284module.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" ieee1284module.la ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(IEEE1284_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(IEEE1284_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ @touch $@
+
+$(IEEE1284_PKG_DESCRIPTION_FILE): $(IEEE1284_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(IEEE1284_PKG_DESCRIPTION_FILE) $(IEEE1284_PKG_INSTALL_SCRIPT)
+ @cp $(IEEE1284_PKG_DESCRIPTION_FILE) $(IEEE1284_PKG)/.DESCRIPTION
+ @cp $(IEEE1284_PKG_INSTALL_SCRIPT) $(IEEE1284_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(IEEE1284_PKG)/.REQUIRES
+ @echo "pkgname=$(IEEE1284_PKG_NAME)" > $(IEEE1284_PKG)/.PKGINFO ; \
+ echo "pkgver=$(IEEE1284_PKG_VERSION)" >> $(IEEE1284_PKG)/.PKGINFO ; \
+ echo "arch=$(IEEE1284_PKG_ARCH)" >> $(IEEE1284_PKG)/.PKGINFO ; \
+ echo "distroname=$(IEEE1284_PKG_DISTRO_NAME)" >> $(IEEE1284_PKG)/.PKGINFO ; \
+ echo "distrover=$(IEEE1284_PKG_DISTRO_VERSION)" >> $(IEEE1284_PKG)/.PKGINFO ; \
+ echo "group=$(IEEE1284_PKG_GROUP)" >> $(IEEE1284_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(IEEE1284_PKG_SHORT_DESCRIPTION)\"" >> $(IEEE1284_PKG)/.PKGINFO ; \
+ echo "url=$(IEEE1284_PKG_URL)" >> $(IEEE1284_PKG)/.PKGINFO ; \
+ echo "license=$(IEEE1284_PKG_LICENSE)" >> $(IEEE1284_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(IEEE1284_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 0.2.11/PATCHES
===================================================================
Index: 0.2.11/libieee1284-pkg-description.in
===================================================================
--- 0.2.11/libieee1284-pkg-description.in (nonexistent)
+++ 0.2.11/libieee1284-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+libieee1284: libieee1284 @VERSION@ (parallel port library)
+libieee1284:
+libieee1284: This library is intended to be used by applications that need to
+libieee1284: communicate with (or at least identify) devices that are attached
+libieee1284: via a parallel port. For example, SANE uses it to identify scanners.
+libieee1284:
+libieee1284:
+libieee1284:
+libieee1284:
+libieee1284:
+libieee1284:
Index: 0.2.11/libieee1284-pkg-install.sh
===================================================================
--- 0.2.11/libieee1284-pkg-install.sh (nonexistent)
+++ 0.2.11/libieee1284-pkg-install.sh (revision 5)
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: 0.2.11/libieee1284-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 0.2.11/licenses/COPYING
===================================================================
--- 0.2.11/licenses/COPYING (nonexistent)
+++ 0.2.11/licenses/COPYING (revision 5)
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
Index: 0.2.11/licenses
===================================================================
--- 0.2.11/licenses (nonexistent)
+++ 0.2.11/licenses (revision 5)
Property changes on: 0.2.11/licenses
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 0.2.11
===================================================================
--- 0.2.11 (nonexistent)
+++ 0.2.11 (revision 5)
Property changes on: 0.2.11
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 0.2.11-ppc32/Makefile
===================================================================
--- 0.2.11-ppc32/Makefile (nonexistent)
+++ 0.2.11-ppc32/Makefile (revision 5)
@@ -0,0 +1,201 @@
+
+COMPONENT_TARGETS = $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+CREATE_PPC32_PACKAGE = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/libieee1284
+
+REQUIRES = libs/libieee1284/0.2.11
+REQUIRES += dev/python2/2.7.18-ppc32
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 0.2.11
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/libieee1284/libieee1284-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/libieee1284-$(version)
+src_dir_name = libieee1284-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = libs
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+IEEE1284_32_PKG_NAME = libieee1284-x32
+IEEE1284_32_PKG_VERSION = 0.2.11
+IEEE1284_32_PKG_ARCH = $(PKGARCH)
+IEEE1284_32_PKG_DISTRO_NAME = $(DISTRO_NAME)
+IEEE1284_32_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+IEEE1284_32_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+IEEE1284_32_PKG_SHORT_DESCRIPTION = parallel port library
+IEEE1284_32_PKG_URL = $(BUG_URL)
+IEEE1284_32_PKG_LICENSE = GPLv2
+IEEE1284_32_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(IEEE1284_32_PKG_NAME)-pkg-description
+IEEE1284_32_PKG_DESCRIPTION_FILE_IN = $(IEEE1284_32_PKG_NAME)-pkg-description.in
+IEEE1284_32_PKG_INSTALL_SCRIPT = $(IEEE1284_32_PKG_NAME)-pkg-install.sh
+
+IEEE1284_32_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(IEEE1284_32_PKG_NAME)-package
+
+pkg_basename = $(IEEE1284_32_PKG_NAME)-$(IEEE1284_32_PKG_VERSION)-$(IEEE1284_32_PKG_ARCH)-$(IEEE1284_32_PKG_DISTRO_NAME)-$(IEEE1284_32_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(IEEE1284_32_PKG)
+
+
+extra_configure_switches = --libdir=/usr/lib$(MULTILIB_PPC32_SUFFIX)
+extra_configure_switches += --infodir=/usr/share/info
+extra_configure_switches += --mandir=/usr/share/man
+extra_configure_switches += --disable-dependency-tracking
+
+extra_configure_switches += --sysconfdir=/etc
+
+extra_configure_switches += --with-python
+
+extra_configure_switches += --program-prefix=''
+extra_configure_switches += --program-suffix=''
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+PYTHON_VERSION = 2.7
+
+python_environment = am_cv_python_version=$(PYTHON_VERSION)
+python_environment += am_cv_python_platform=linux2
+python_environment += PYTHON_INCLUDES=-I$(TARGET_DEST_DIR)/usr/include/python$(PYTHON_VERSION)
+python_environment += src_ieee1284module_la_CFLAGS='-I$(TARGET_DEST_DIR)/usr/include/python$(PYTHON_VERSION) -fpic'
+python_environment += am_cv_python_pythondir=/usr/lib$(MULTILIB_PPC32_SUFFIX)/python$(PYTHON_VERSION)/site-packages
+python_environment += am_cv_python_pyexecdir=/usr/lib$(MULTILIB_PPC32_SUFFIX)/python$(PYTHON_VERSION)/site-packages
+
+#
+# Path to Python.h
+#
+CFLAGS += -I$(TARGET_DEST_DIR)/usr/include/python$(PYTHON_VERSION)
+
+
+TARGET_LIB_RPATH = /lib$(MULTILIB_PPC32_SUFFIX):/usr/lib$(MULTILIB_PPC32_SUFFIX):/usr/lib/../lib$(MULTILIB_PPC32_SUFFIX)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @( cd $(SRC_DIR) ; \
+ ./bootstrap ; \
+ )
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @cd $(build_dir) && \
+ $(BUILD_ENVIRONMENT) $(python_environment) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET32) \
+ $(extra_configure_switches)
+ @( cd $(build_dir) ; \
+ sed -i 's|^libieee1284_la_LDFLAGS =|libieee1284_la_LDFLAGS = -Wl,-rpath,$(TARGET_LIB_RPATH)|' Makefile ; \
+ )
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE) $(python_environment)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(IEEE1284_32_PKG)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(env_sysroot)
+ @rm -rf $(IEEE1284_32_PKG)/usr/bin
+ @rm -rf $(IEEE1284_32_PKG)/usr/include
+ @rm -rf $(IEEE1284_32_PKG)/usr/share
+ # ======= remove toolchain path from target libtool *.la files =======
+ @( cd $(IEEE1284_32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX) ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libieee1284.la ; \
+ )
+ @( cd $(IEEE1284_32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX)/python$(PYTHON_VERSION)/site-packages ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" ieee1284module.la ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(IEEE1284_32_PKG))
+ # ======= tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_PPC32_SUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libieee1284.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libieee1284.la ; \
+ )
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_PPC32_SUFFIX)/python$(PYTHON_VERSION)/site-packages ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" ieee1284module.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" ieee1284module.la ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(IEEE1284_32_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(IEEE1284_32_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ @touch $@
+
+$(IEEE1284_32_PKG_DESCRIPTION_FILE): $(IEEE1284_32_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(IEEE1284_32_PKG_DESCRIPTION_FILE) $(IEEE1284_32_PKG_INSTALL_SCRIPT)
+ @cp $(IEEE1284_32_PKG_DESCRIPTION_FILE) $(IEEE1284_32_PKG)/.DESCRIPTION
+ @cp $(IEEE1284_32_PKG_INSTALL_SCRIPT) $(IEEE1284_32_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(IEEE1284_32_PKG)/.REQUIRES
+ @echo "pkgname=$(IEEE1284_32_PKG_NAME)" > $(IEEE1284_32_PKG)/.PKGINFO ; \
+ echo "pkgver=$(IEEE1284_32_PKG_VERSION)" >> $(IEEE1284_32_PKG)/.PKGINFO ; \
+ echo "arch=$(IEEE1284_32_PKG_ARCH)" >> $(IEEE1284_32_PKG)/.PKGINFO ; \
+ echo "distroname=$(IEEE1284_32_PKG_DISTRO_NAME)" >> $(IEEE1284_32_PKG)/.PKGINFO ; \
+ echo "distrover=$(IEEE1284_32_PKG_DISTRO_VERSION)" >> $(IEEE1284_32_PKG)/.PKGINFO ; \
+ echo "group=$(IEEE1284_32_PKG_GROUP)" >> $(IEEE1284_32_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(IEEE1284_32_PKG_SHORT_DESCRIPTION)\"" >> $(IEEE1284_32_PKG)/.PKGINFO ; \
+ echo "url=$(IEEE1284_32_PKG_URL)" >> $(IEEE1284_32_PKG)/.PKGINFO ; \
+ echo "license=$(IEEE1284_32_PKG_LICENSE)" >> $(IEEE1284_32_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(IEEE1284_32_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 0.2.11-ppc32/PATCHES
===================================================================
Index: 0.2.11-ppc32/libieee1284-x32-pkg-description.in
===================================================================
--- 0.2.11-ppc32/libieee1284-x32-pkg-description.in (nonexistent)
+++ 0.2.11-ppc32/libieee1284-x32-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+libieee1284-x32: libieee1284-x32 @VERSION@ (parallel port library)
+libieee1284-x32:
+libieee1284-x32: This library is intended to be used by applications that need to
+libieee1284-x32: communicate with (or at least identify) devices that are attached
+libieee1284-x32: via a parallel port. For example, SANE uses it to identify scanners.
+libieee1284-x32:
+libieee1284-x32:
+libieee1284-x32:
+libieee1284-x32:
+libieee1284-x32:
+libieee1284-x32:
Index: 0.2.11-ppc32/libieee1284-x32-pkg-install.sh
===================================================================
--- 0.2.11-ppc32/libieee1284-x32-pkg-install.sh (nonexistent)
+++ 0.2.11-ppc32/libieee1284-x32-pkg-install.sh (revision 5)
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: 0.2.11-ppc32/libieee1284-x32-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 0.2.11-ppc32
===================================================================
--- 0.2.11-ppc32 (nonexistent)
+++ 0.2.11-ppc32 (revision 5)
Property changes on: 0.2.11-ppc32
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 0.2.11-x86_32/Makefile
===================================================================
--- 0.2.11-x86_32/Makefile (nonexistent)
+++ 0.2.11-x86_32/Makefile (revision 5)
@@ -0,0 +1,198 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC64)
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+CREATE_X86_32_PACKAGE = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/libieee1284
+
+REQUIRES = libs/libieee1284/0.2.11
+REQUIRES += dev/python2/2.7.18-x86_32
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 0.2.11
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/libieee1284/libieee1284-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/libieee1284-$(version)
+src_dir_name = libieee1284-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = libs
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+IEEE1284_32_PKG_NAME = libieee1284-x32
+IEEE1284_32_PKG_VERSION = 0.2.11
+IEEE1284_32_PKG_ARCH = $(PKGARCH)
+IEEE1284_32_PKG_DISTRO_NAME = $(DISTRO_NAME)
+IEEE1284_32_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+IEEE1284_32_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+IEEE1284_32_PKG_SHORT_DESCRIPTION = parallel port library
+IEEE1284_32_PKG_URL = $(BUG_URL)
+IEEE1284_32_PKG_LICENSE = GPLv2
+IEEE1284_32_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(IEEE1284_32_PKG_NAME)-pkg-description
+IEEE1284_32_PKG_DESCRIPTION_FILE_IN = $(IEEE1284_32_PKG_NAME)-pkg-description.in
+IEEE1284_32_PKG_INSTALL_SCRIPT = $(IEEE1284_32_PKG_NAME)-pkg-install.sh
+
+IEEE1284_32_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(IEEE1284_32_PKG_NAME)-package
+
+pkg_basename = $(IEEE1284_32_PKG_NAME)-$(IEEE1284_32_PKG_VERSION)-$(IEEE1284_32_PKG_ARCH)-$(IEEE1284_32_PKG_DISTRO_NAME)-$(IEEE1284_32_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(IEEE1284_32_PKG)
+
+
+extra_configure_switches = --libdir=/usr/lib$(MULTILIB_X86_32_SUFFIX)
+extra_configure_switches += --infodir=/usr/share/info
+extra_configure_switches += --mandir=/usr/share/man
+extra_configure_switches += --disable-dependency-tracking
+
+extra_configure_switches += --sysconfdir=/etc
+
+extra_configure_switches += --with-python
+
+extra_configure_switches += --program-prefix=''
+extra_configure_switches += --program-suffix=''
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+PYTHON_VERSION = 2.7
+
+python_environment = am_cv_python_version=$(PYTHON_VERSION)
+python_environment += am_cv_python_platform=linux2
+python_environment += PYTHON_INCLUDES=-I$(TARGET_DEST_DIR)/usr/include/python$(PYTHON_VERSION)
+python_environment += src_ieee1284module_la_CFLAGS='-I$(TARGET_DEST_DIR)/usr/include/python$(PYTHON_VERSION) -fpic'
+python_environment += am_cv_python_pythondir=/usr/lib$(MULTILIB_X86_32_SUFFIX)/python$(PYTHON_VERSION)/site-packages
+python_environment += am_cv_python_pyexecdir=/usr/lib$(MULTILIB_X86_32_SUFFIX)/python$(PYTHON_VERSION)/site-packages
+
+#
+# Path to Python.h
+#
+CFLAGS += -I$(TARGET_DEST_DIR)/usr/include/python$(PYTHON_VERSION)
+
+
+TARGET_LIB_RPATH = /lib$(MULTILIB_X86_32_SUFFIX):/usr/lib$(MULTILIB_X86_32_SUFFIX):/usr/lib/../lib$(MULTILIB_X86_32_SUFFIX)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @( cd $(SRC_DIR) ; \
+ ./bootstrap ; \
+ )
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @cd $(build_dir) && \
+ $(BUILD_ENVIRONMENT) $(python_environment) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET32) \
+ $(extra_configure_switches)
+ @( cd $(build_dir) ; \
+ sed -i 's|^libieee1284_la_LDFLAGS =|libieee1284_la_LDFLAGS = -Wl,-rpath,$(TARGET_LIB_RPATH)|' Makefile ; \
+ )
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE) $(python_environment)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(IEEE1284_32_PKG)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(env_sysroot)
+ @rm -rf $(IEEE1284_32_PKG)/usr/bin
+ @rm -rf $(IEEE1284_32_PKG)/usr/include
+ @rm -rf $(IEEE1284_32_PKG)/usr/share
+ # ======= remove toolchain path from target libtool *.la files =======
+ @( cd $(IEEE1284_32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX) ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libieee1284.la ; \
+ )
+ @( cd $(IEEE1284_32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX)/python$(PYTHON_VERSION)/site-packages ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" ieee1284module.la ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(IEEE1284_32_PKG))
+ # ======= tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_X86_32_SUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libieee1284.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libieee1284.la ; \
+ )
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_X86_32_SUFFIX)/python$(PYTHON_VERSION)/site-packages ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" ieee1284module.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" ieee1284module.la ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(IEEE1284_32_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(IEEE1284_32_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ @touch $@
+
+$(IEEE1284_32_PKG_DESCRIPTION_FILE): $(IEEE1284_32_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(IEEE1284_32_PKG_DESCRIPTION_FILE) $(IEEE1284_32_PKG_INSTALL_SCRIPT)
+ @cp $(IEEE1284_32_PKG_DESCRIPTION_FILE) $(IEEE1284_32_PKG)/.DESCRIPTION
+ @cp $(IEEE1284_32_PKG_INSTALL_SCRIPT) $(IEEE1284_32_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(IEEE1284_32_PKG)/.REQUIRES
+ @echo "pkgname=$(IEEE1284_32_PKG_NAME)" > $(IEEE1284_32_PKG)/.PKGINFO ; \
+ echo "pkgver=$(IEEE1284_32_PKG_VERSION)" >> $(IEEE1284_32_PKG)/.PKGINFO ; \
+ echo "arch=$(IEEE1284_32_PKG_ARCH)" >> $(IEEE1284_32_PKG)/.PKGINFO ; \
+ echo "distroname=$(IEEE1284_32_PKG_DISTRO_NAME)" >> $(IEEE1284_32_PKG)/.PKGINFO ; \
+ echo "distrover=$(IEEE1284_32_PKG_DISTRO_VERSION)" >> $(IEEE1284_32_PKG)/.PKGINFO ; \
+ echo "group=$(IEEE1284_32_PKG_GROUP)" >> $(IEEE1284_32_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(IEEE1284_32_PKG_SHORT_DESCRIPTION)\"" >> $(IEEE1284_32_PKG)/.PKGINFO ; \
+ echo "url=$(IEEE1284_32_PKG_URL)" >> $(IEEE1284_32_PKG)/.PKGINFO ; \
+ echo "license=$(IEEE1284_32_PKG_LICENSE)" >> $(IEEE1284_32_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(IEEE1284_32_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 0.2.11-x86_32/PATCHES
===================================================================
Index: 0.2.11-x86_32/libieee1284-x32-pkg-description.in
===================================================================
--- 0.2.11-x86_32/libieee1284-x32-pkg-description.in (nonexistent)
+++ 0.2.11-x86_32/libieee1284-x32-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+libieee1284-x32: libieee1284-x32 @VERSION@ (parallel port library)
+libieee1284-x32:
+libieee1284-x32: This library is intended to be used by applications that need to
+libieee1284-x32: communicate with (or at least identify) devices that are attached
+libieee1284-x32: via a parallel port. For example, SANE uses it to identify scanners.
+libieee1284-x32:
+libieee1284-x32:
+libieee1284-x32:
+libieee1284-x32:
+libieee1284-x32:
+libieee1284-x32:
Index: 0.2.11-x86_32/libieee1284-x32-pkg-install.sh
===================================================================
--- 0.2.11-x86_32/libieee1284-x32-pkg-install.sh (nonexistent)
+++ 0.2.11-x86_32/libieee1284-x32-pkg-install.sh (revision 5)
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: 0.2.11-x86_32/libieee1284-x32-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 0.2.11-x86_32
===================================================================
--- 0.2.11-x86_32 (nonexistent)
+++ 0.2.11-x86_32 (revision 5)
Property changes on: 0.2.11-x86_32
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: .
===================================================================
--- . (nonexistent)
+++ . (revision 5)
Property changes on: .
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
383 Commits
1 Branch
1 Tag