Radix cross Linux

     5         kx #!/bin/sh
     5         kx #
     5         kx # rc.inet2      This shell script boots up the entire network system.
     5         kx #               Note, that when this script is used to also fire
     5         kx #               up any important remote NFS disks (like the /usr
     5         kx #               directory), care must be taken to actually
     5         kx #               have all the needed binaries online _now_ ...
     5         kx #
     5         kx #               Uncomment or comment out sections depending on which
     5         kx #               services your site requires.
     5         kx #
     5         kx # Author:       Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
     5         kx # Modified by:  Patrick Volkerding <volkerdi@slackware.com>
     5         kx #               Andrey V. Kosteltsev,  <kx@radix.pro>
     5         kx #
     5         kx 
     5         kx 
     5         kx # At this point, we are (almost) ready to talk to The World...
     5         kx 
     5         kx 
     5         kx # If there is a firewall script, run it before enabling packet forwarding.
     5         kx # See the HOWTOs on http://www.netfilter.org/ for documentation on
     5         kx # setting up a firewall or NAT on Linux. In some cases this might need to
     5         kx # be moved past the section below dealing with IP packet forwarding.
     5         kx if [ -x /etc/rc.d/rc.firewall ]; then
     5         kx   /etc/rc.d/rc.firewall start
     5         kx fi
     5         kx 
     5         kx # Turn on IPv4 packet forwarding support.
     5         kx if [ -x /etc/rc.d/rc.ip_forward ]; then
     5         kx   /etc/rc.d/rc.ip_forward start
     5         kx fi
     5         kx 
     5         kx # Start krb5kdc, which is the Kerberos version 5 Authentication Service
     5         kx # and Key Distribution Center (AS/KDC). This needs to run first on both
     5         kx # master and secondary KDCs.
     5         kx if [ -x /etc/rc.d/rc.krb5kdc ]; then
     5         kx   /etc/rc.d/rc.krb5kdc start
     5         kx fi
     5         kx 
     5         kx # Start the Kerberos administration server. This typically runs on the
     5         kx # master Kerberos server, which stores the KDC database.
     5         kx if [ -x /etc/rc.d/rc.kadmind ]; then
     5         kx   /etc/rc.d/rc.kadmind start
     5         kx fi
     5         kx 
     5         kx # Start the Kerberos V5 slave KDC update server. This runs on a slave
     5         kx # (secondary) KDC server. It allows the master Kerberos server to use
     5         kx # kprop(8) to propagate its database to the slave servers.
     5         kx if [ -x /etc/rc.d/rc.kpropd ]; then
     5         kx   /etc/rc.d/rc.kpropd start
     5         kx fi
     5         kx 
     5         kx # Mount remote (NFS) filesystems:
     5         kx if cat /etc/fstab | grep -v '^#' | grep -w nfs 1> /dev/null 2> /dev/null ; then
     5         kx   # Start rpc.portmap, /sbin/rpc.lockd, and /sbin/rpc.statd if we find NFS
     5         kx   # volumes defined in /etc/fstab since these will need to be running in order
     5         kx   # to mount them. If they are not running, attempting to mount an NFS
     5         kx   # partition will cause mount to hang, or at least result in unreliable
     5         kx   # operation. Keep this in mind if you plan to mount unlisted NFS
     5         kx   # partitions... 
     5         kx   # If you have uncommented NFS partitions in your /etc/fstab, rc.rpc is run
     5         kx   # whether it is set as executable or not. If you don't want to run it,
     5         kx   # comment the NFS partitions out in /etc/fstab or erase/rename rc.rpc.
     5         kx   if [ -r /etc/rc.d/rc.rpc ]; then
     5         kx     sh /etc/rc.d/rc.rpc start
     5         kx   fi
     5         kx   echo "Mounting remote (NFS) file systems:  /sbin/mount -a -t nfs"
     5         kx   /sbin/mount -a -t nfs          # This may be our /usr runtime!
     5         kx   # Show the mounted volumes:
     5         kx   /sbin/mount -v -t nfs
     5         kx fi
     5         kx 
     5         kx # If /etc/rc.d/rc.rpc is executable, run it to load rpc.portmap, rpc.lockd,
     5         kx # and rpc.statd. This might be needed to mount NFS partitions that are not
     5         kx # listed in /etc/fstab. Starting this twice won't hurt as the script will
     5         kx # check if things are already running before trying to start them.
     5         kx if [ -x /etc/rc.d/rc.rpc ]; then
     5         kx   /etc/rc.d/rc.rpc start
     5         kx fi
     5         kx 
     5         kx # Mount remote CIFS filesystems. Note that where possible, using CIFS is
     5         kx # preferred over SMBFS. SMBFS is no longer actively maintained.
     5         kx if cat /etc/fstab | grep -v '^#' | grep -w cifs 1> /dev/null 2> /dev/null ; then
     5         kx   echo "Mounting remote CIFS file systems:  /sbin/mount -a -t cifs"
     5         kx   /sbin/mount -a -t cifs
     5         kx   # Show the mounted volumes:
     5         kx   /sbin/mount -v -t cifs
     5         kx fi
     5         kx 
     5         kx # Mount remote SMB filesystems:
     5         kx if cat /etc/fstab | grep -v '^#' | grep -w smbfs 1> /dev/null 2> /dev/null ; then
     5         kx   echo "Mounting remote SMBFS file systems:  /sbin/mount -a -t smbfs"
     5         kx   /sbin/mount -a -t smbfs
     5         kx   # Show the mounted volumes:
     5         kx   /sbin/mount -v -t smbfs
     5         kx fi
     5         kx 
     5         kx # Start the system logger if it is not already running (maybe because /usr
     5         kx # is on a network partition). NOTE: Don't put /usr on a network partition,
     5         kx # or even a separate local partition. This is not supported and is likely to
     5         kx # cause some problems...
     5         kx if [ -x /etc/rc.d/rc.syslog -a -d /var/log -a ! -r /var/run/syslogd.pid ]; then
     5         kx   /etc/rc.d/rc.syslog start
     5         kx fi
     5         kx 
     5         kx # Start the inetd server:
     5         kx if [ -x /etc/rc.d/rc.inetd ]; then
     5         kx   /etc/rc.d/rc.inetd start
     5         kx fi
     5         kx 
     5         kx # Start the OpenSSH SSH daemon:
     5         kx if [ -x /etc/rc.d/rc.sshd ]; then
     5         kx   echo "Starting OpenSSH SSH daemon:  /usr/sbin/sshd"
     5         kx   /etc/rc.d/rc.sshd start
     5         kx fi
     5         kx 
     5         kx # Start the BIND name server daemon:
     5         kx if [ -x /etc/rc.d/rc.bind ]; then
     5         kx   /etc/rc.d/rc.bind start
     5         kx fi
     5         kx 
     5         kx # Start NIS (the Network Information Service):
     5         kx if [ -x /etc/rc.d/rc.yp ]; then
     5         kx   /etc/rc.d/rc.yp start
     5         kx fi
     5         kx 
     5         kx # Start OpenVPN:
     5         kx if [ -x /etc/rc.d/rc.openvpn ]; then
     5         kx   /etc/rc.d/rc.openvpn start
     5         kx fi
     5         kx 
     5         kx # Start the NFS server. Note that for this to work correctly, you'll
     5         kx # need nfsd support in the kernel (the startup script will try to load
     5         kx # the module for you).
     5         kx # You'll also need to set up some shares in /etc/exports.
     5         kx # Starting the NFS server:
     5         kx if [ -x /etc/rc.d/rc.nfsd ]; then
     5         kx   /etc/rc.d/rc.nfsd start
     5         kx fi
     5         kx