Index: 3.2.10/Makefile
===================================================================
--- 3.2.10/Makefile (nonexistent)
+++ 3.2.10/Makefile (revision 5)
@@ -0,0 +1,307 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/a/eudev
+SOURCE_REQUIRES += sources/packages/l/hwids
+
+REQUIRES = libs/eudev/3.2.10
+REQUIRES += app/pciutils/3.7.0
+REQUIRES += app/usbutils/013
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 3.2.10
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/a/eudev/eudev-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/eudev-$(version)
+src_dir_name = eudev-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+hw_ids_version = 20210306
+hw_ids_archive = $(SRC_PACKAGE_PATH)/packages/l/hwids/hwids-$(hw_ids_version).tar.xz
+
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+config_dir = $(CURDIR)/config
+
+
+####### Targets
+
+PKG_GROUP = app
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+EUDEV_PKG_NAME = eudev
+EUDEV_PKG_VERSION = 3.2.10
+EUDEV_PKG_ARCH = $(PKGARCH)
+EUDEV_PKG_DISTRO_NAME = $(DISTRO_NAME)
+EUDEV_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+EUDEV_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+EUDEV_PKG_SHORT_DESCRIPTION = dynamic device directory system
+EUDEV_PKG_URL = $(BUG_URL)
+EUDEV_PKG_LICENSE = GPLv2
+EUDEV_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(EUDEV_PKG_NAME)-pkg-description
+EUDEV_PKG_DESCRIPTION_FILE_IN = $(EUDEV_PKG_NAME)-pkg-description.in
+EUDEV_PKG_INSTALL_SCRIPT = $(EUDEV_PKG_NAME)-pkg-install.sh
+
+EUDEV_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(EUDEV_PKG_NAME)-package
+
+pkg_basename = $(EUDEV_PKG_NAME)-$(EUDEV_PKG_VERSION)-$(EUDEV_PKG_ARCH)-$(EUDEV_PKG_DISTRO_NAME)-$(EUDEV_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(EUDEV_PKG)
+
+
+extra_configure_switches = --libdir=/usr/lib$(LIBSUFFIX)
+extra_configure_switches += --docdir=/usr/share/doc/$(doc_dir_name)
+extra_configure_switches += --mandir=/usr/share/man
+extra_configure_switches += --disable-dependency-tracking
+
+extra_configure_switches += --with-rootprefix=/
+extra_configure_switches += --with-rootlibdir=/lib$(LIBSUFFIX)
+extra_configure_switches += --with-rootlibexecdir=/lib/udev
+extra_configure_switches += --with-rootrundir=/run
+
+extra_configure_switches += --sysconfdir=/etc
+extra_configure_switches += --bindir=/sbin
+extra_configure_switches += --sbindir=/sbin
+extra_configure_switches += --libexecdir=/lib
+
+extra_configure_switches += --with-misc-ids-path=/usr/share/hwdata
+extra_configure_switches += --with-usb-ids-path=/usr/share/hwdata
+extra_configure_switches += --with-pci-ids-path=/usr/share/hwdata
+
+extra_configure_switches += --enable-hwdb
+extra_configure_switches += --enable-rule-generator
+extra_configure_switches += --enable-split-usr
+extra_configure_switches += --enable-kmod
+extra_configure_switches += --enable-manpages
+extra_configure_switches += --disable-selinux
+
+extra_configure_switches += --with-gnu-ld
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+
+
+LDFLAGS += -Wl,-rpath,/lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)
+
+
+TARGET_BIN_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @( cd $(SRC_DIR) ; \
+ ./autogen.sh ; \
+ )
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET) \
+ $(extra_configure_switches)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(EUDEV_PKG)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(env_sysroot)
+ @mkdir -p $(EUDEV_PKG)/usr/sbin
+ mv $(EUDEV_PKG)/sbin/update-udev-ids.pl $(EUDEV_PKG)/usr/sbin/update-udev-ids.pl
+ @( cd $(EUDEV_PKG)/usr/sbin ; ln -sf update-udev-ids.pl update-udev-ids )
+ # ======= remove libraries installed by libs/eudev package ======
+ @rm -rf $(EUDEV_PKG)/lib$(LIBSUFFIX)/libudev.*
+ @rm -rf $(EUDEV_PKG)/usr/lib$(LIBSUFFIX)
+ @rm -rf $(EUDEV_PKG)/usr/include
+ # ======= install unique IDs files ======
+ @mkdir -p $(EUDEV_PKG)/usr/share/hwdata
+ @tar xJf $(hw_ids_archive) -C $(EUDEV_PKG)/usr/share/hwdata
+ # ======= change mode of script in udev libexec (--libexec=/lib) directory =======
+ @chmod a+x $(EUDEV_PKG)/lib/udev/rule_generator.functions
+ @( cd $(EUDEV_PKG)/sbin ; ln -sf ../lib/udev/scsi_id scsi_id )
+ # ======= Move system installed hwdb files under /lib =======
+ @mkdir -p $(EUDEV_PKG)/lib/udev/hwdb.d
+ @mv $(EUDEV_PKG)/etc/udev/hwdb.d/* $(EUDEV_PKG)/lib/udev/hwdb.d
+ @ln -sf ../../sbin/udevd $(EUDEV_PKG)/lib/udev/udevd
+ @mkdir -p $(EUDEV_PKG)/run \
+ $(EUDEV_PKG)/{etc,lib}/modprobe.d \
+ $(EUDEV_PKG)/etc/rc.d \
+ $(EUDEV_PKG)/etc/udev/rules.d \
+ $(EUDEV_PKG)/lib/firmware
+ @cp -a $(config_dir)/udev.conf $(EUDEV_PKG)/etc/udev/udev.conf
+ # ======= Copy custom rules =======
+ @cp -a $(config_dir)/rules.d/* $(EUDEV_PKG)/lib/udev/rules.d
+ # ======= Copy the init script and module-init-tools stuff =======
+ @cp -a $(config_dir)/rc.d/rc.udev.new $(EUDEV_PKG)/etc/rc.d/rc.udev.new
+ @cp -a $(config_dir)/modprobe.d/*.conf $(EUDEV_PKG)/lib/modprobe.d
+ @cp -a $(config_dir)/modprobe.d/README $(EUDEV_PKG)/etc/modprobe.d
+ # ======= Change access mode of files and directories =======
+ @find $(EUDEV_PKG)/etc $(EUDEV_PKG)/lib/modprobe.d -type f -exec chmod 644 {} \;
+ @find $(EUDEV_PKG)/etc -type d -exec chmod 755 {} \;
+ @chmod 0755 $(EUDEV_PKG)/etc/rc.d/rc.udev.new
+ @chmod 0755 $(EUDEV_PKG)/lib/udev/*
+ # ======= Add extra device directory to the package that udev doesn't make =======
+ @mkdir -p $(EUDEV_PKG)/lib/udev/devices
+ # ======= Support locally added additional devices found in this directory =======
+ @mkdir -p $(EUDEV_PKG)/etc/udev/devices
+ # ======= Gzip man pages =======
+ @if [ -d $(EUDEV_PKG)/usr/share/man ]; then \
+ ( cd $(EUDEV_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(EUDEV_PKG)/usr/doc/$(src_dir_name)
+ @cp -a $(SRC_DIR)/COPYING \
+ $(EUDEV_PKG)/usr/doc/$(src_dir_name)
+ @mkdir -p $(EUDEV_PKG)/usr/share/doc/$(src_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a COPYING README.md \
+ $(EUDEV_PKG)/usr/share/doc/$(src_dir_name) \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r ChangeLog ]; then \
+ DOCSDIR=`echo $(EUDEV_PKG)/usr/share/doc/$(src_dir_name)` ; \
+ cat ChangeLog | head -n 1000 > $$DOCSDIR/ChangeLog ; \
+ touch -r ChangeLog $$DOCSDIR/ChangeLog ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(EUDEV_PKG))
+ # ======= tune pkg-config *.pc in /usr/share/pkgconfig/udev.pc file =======
+ # ======= but do not touch udevdir variable =======
+ @( cd $(TARGET_DEST_DIR)/usr/share/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" udev.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(EUDEV_PKG)/sbin ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target binaries =======
+ @( cd $(EUDEV_PKG)/sbin ; \
+ for file in `find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_BIN_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(EUDEV_PKG_DESCRIPTION_FILE): $(EUDEV_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(EUDEV_PKG_DESCRIPTION_FILE) $(EUDEV_PKG_INSTALL_SCRIPT)
+ @cp $(EUDEV_PKG_DESCRIPTION_FILE) $(EUDEV_PKG)/.DESCRIPTION
+ @cp $(EUDEV_PKG_INSTALL_SCRIPT) $(EUDEV_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(EUDEV_PKG)/.REQUIRES
+ @echo "pkgname=$(EUDEV_PKG_NAME)" > $(EUDEV_PKG)/.PKGINFO ; \
+ echo "pkgver=$(EUDEV_PKG_VERSION)" >> $(EUDEV_PKG)/.PKGINFO ; \
+ echo "arch=$(EUDEV_PKG_ARCH)" >> $(EUDEV_PKG)/.PKGINFO ; \
+ echo "distroname=$(EUDEV_PKG_DISTRO_NAME)" >> $(EUDEV_PKG)/.PKGINFO ; \
+ echo "distrover=$(EUDEV_PKG_DISTRO_VERSION)" >> $(EUDEV_PKG)/.PKGINFO ; \
+ echo "group=$(EUDEV_PKG_GROUP)" >> $(EUDEV_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(EUDEV_PKG_SHORT_DESCRIPTION)\"" >> $(EUDEV_PKG)/.PKGINFO ; \
+ echo "url=$(EUDEV_PKG_URL)" >> $(EUDEV_PKG)/.PKGINFO ; \
+ echo "license=$(EUDEV_PKG_LICENSE)" >> $(EUDEV_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(EUDEV_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 3.2.10/PATCHES
===================================================================
--- 3.2.10/PATCHES (nonexistent)
+++ 3.2.10/PATCHES (revision 5)
@@ -0,0 +1,5 @@
+
+../../../sources/packages/a/eudev/patches/eudev-3.2.10-bind-events.patch -p0
+../../../sources/packages/a/eudev/patches/eudev-3.2.10-cdrom-id.patch -p0
+../../../sources/packages/a/eudev/patches/eudev-3.2.10-ids-pl.patch -p0
+../../../sources/packages/a/eudev/patches/eudev-3.2.10-udev-default.patch -p0
Index: 3.2.10/config/modprobe.d/8139cp.conf
===================================================================
--- 3.2.10/config/modprobe.d/8139cp.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/8139cp.conf (revision 5)
@@ -0,0 +1,7 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Alternate 8139 driver. Some 8139 cards need this specific driver, though...
+blacklist 8139cp
+
Index: 3.2.10/config/modprobe.d/README
===================================================================
--- 3.2.10/config/modprobe.d/README (nonexistent)
+++ 3.2.10/config/modprobe.d/README (revision 5)
@@ -0,0 +1,11 @@
+# /etc/modprobe.d/README
+#
+# The monolithic "blacklist" file (and others) that used to be here in this
+# directory have been split into several more fine-grained files and moved
+# to the /lib/modprobe.d/ directory. Any file in /lib/modprobe.d/ will be
+# overridden by an identically named file in this directory (/etc/modprobe.d/)
+# or /run/modprobe.d/ (but since /run is on a tmpfs, it's not persistent
+# across reboots, so you probably don't want to use it).
+#
+# See "man modprobe.d" for more information.
+#
Index: 3.2.10/config/modprobe.d/bcm43xx.conf
===================================================================
--- 3.2.10/config/modprobe.d/bcm43xx.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/bcm43xx.conf (revision 5)
@@ -0,0 +1,7 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Deprecated BCM4318 driver.
+blacklist bcm43xx
+
Index: 3.2.10/config/modprobe.d/edac.conf
===================================================================
--- 3.2.10/config/modprobe.d/edac.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/edac.conf (revision 5)
@@ -0,0 +1,29 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Blacklist all EDAC (Error Detection And Correction) modules, as some hardware
+# implementations are buggy and will cause the kernel to hang or crash.
+# Feel free to copy this file to /etc/modprobe.d/ and comment out any modules
+# that you'd like to try. If it's unstable you'll likely know very quickly.
+
+blacklist amd64_edac_mod
+blacklist amd76x_edac
+blacklist e752x_edac
+blacklist e7xxx_edac
+blacklist i3000_edac
+blacklist i3200_edac
+blacklist i5000_edac
+blacklist i5100_edac
+blacklist i5400_edac
+blacklist i7300_edac
+blacklist i7core_edac
+blacklist i82860_edac
+blacklist i82875p_edac
+blacklist i82975x_edac
+blacklist ie31200_edac
+blacklist pnd2_edac
+blacklist r82600_edac
+blacklist sb_edac
+blacklist skx_edac
+blacklist x38_edac
Index: 3.2.10/config/modprobe.d/eepro100.conf
===================================================================
--- 3.2.10/config/modprobe.d/eepro100.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/eepro100.conf (revision 5)
@@ -0,0 +1,8 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Alternate Intel EtherExpress Pro/100 support driver. List it
+# here so it won't conflict with an already-loaded e100 module.
+blacklist eepro100
+
Index: 3.2.10/config/modprobe.d/eth1394.conf
===================================================================
--- 3.2.10/config/modprobe.d/eth1394.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/eth1394.conf (revision 5)
@@ -0,0 +1,8 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Ethernet over IEEE1394 module. In too many cases this will load
+# when there's no eth1394 device present (just an IEEE1394 port)
+blacklist eth1394
+
Index: 3.2.10/config/modprobe.d/evbug.conf
===================================================================
--- 3.2.10/config/modprobe.d/evbug.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/evbug.conf (revision 5)
@@ -0,0 +1,7 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+#evbug is a debug tool and should be loaded explicitly
+blacklist evbug
+
Index: 3.2.10/config/modprobe.d/framebuffers.conf
===================================================================
--- 3.2.10/config/modprobe.d/framebuffers.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/framebuffers.conf (revision 5)
@@ -0,0 +1,48 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Hardware specific video framebuffer modules. If the user wants
+# these, they can load them manually or de-blacklist them. Having
+# them load automatically may lead to funny side effects with
+# certain revisions of video hardware.
+blacklist arcfb
+blacklist aty128fb
+blacklist atyfb
+blacklist cirrusfb
+blacklist clgenfb
+blacklist cyber2000fb
+blacklist fbcon-cfb2
+blacklist fbcon-cfb4
+blacklist fbcon-hga
+blacklist fbcon-mfb
+blacklist fbcon-vga-planes
+blacklist fbgen
+blacklist hgafb
+blacklist i2c-matroxfb
+blacklist i810fb
+blacklist intelfb
+blacklist kyrofb
+blacklist matroxfb_DAC1064
+blacklist matroxfb_Ti3026
+blacklist matroxfb_accel
+blacklist matroxfb_base
+blacklist matroxfb_crtc2
+blacklist matroxfb_g450
+blacklist matroxfb_maven
+blacklist matroxfb_misc
+blacklist neofb
+blacklist nvidiafb
+blacklist pm2fb
+blacklist pm3fb
+blacklist radeonfb
+blacklist rivafb
+blacklist savagefb
+blacklist sisfb
+blacklist sstfb
+blacklist tdfxfb
+blacklist tridentfb
+blacklist vga16fb
+blacklist viafb
+blacklist virgefb
+
Index: 3.2.10/config/modprobe.d/hostap.conf
===================================================================
--- 3.2.10/config/modprobe.d/hostap.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/hostap.conf (revision 5)
@@ -0,0 +1,12 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Modules used to run a wireless adapter as an access point. These
+# conflict with the normal driver for the device, and so should be
+# loaded manually.
+blacklist hostap_cs
+blacklist hostap_pci
+blacklist hostap_plx
+blacklist hostap
+
Index: 3.2.10/config/modprobe.d/isapnp.conf
===================================================================
--- 3.2.10/config/modprobe.d/isapnp.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/isapnp.conf (revision 5)
@@ -0,0 +1,24 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# These aliases are here because many PnP modules do not provide them.
+#
+# NOTE: Commented out due to noise pollution from udev.
+# In the unlikely event that your machine needs these aliases, copy this
+# file to /etc/modprobe.d/isapnp.conf and uncomment them there.
+
+#alias pnp:dPNP0400 parport_pc
+#alias pnp:dPNP0401 parport_pc
+#alias pnp:dPNP0510 irtty-sir
+#alias pnp:dPNP0511 irtty-sir
+#alias pnp:dPNP0700 floppy
+#alias pnp:dPNP0B00 rtc
+#alias acpi:PNP0B00: rtc-cmos
+#alias acpi:PNP0B01: rtc-cmos
+#alias acpi:PNP0B02: rtc-cmos
+#alias pnp:dPNPB02F analog
+#alias pnp:dPNP0F13 psmouse
+#alias pnp:dPNP0800 pcspkr
+#alias pnp:dPNP0303 atkbd
+
Index: 3.2.10/config/modprobe.d/isdn.conf
===================================================================
--- 3.2.10/config/modprobe.d/isdn.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/isdn.conf (revision 5)
@@ -0,0 +1,11 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# These two come from the hwdata project
+# Bug numbers are Fedora/RH specific
+
+# ISDN - see bugs 154799, 159068
+blacklist hisax
+blacklist hisax_fcpcipnp
+
Index: 3.2.10/config/modprobe.d/oss.conf
===================================================================
--- 3.2.10/config/modprobe.d/oss.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/oss.conf (revision 5)
@@ -0,0 +1,61 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# OSS (Open Sound System) modules. This is the old and deprecated Linux
+# sound system. If you want to use OSS, remove the alsa-driver package
+# and cut out (or comment out) this list. With these modules
+# blacklisted ALSA will load by default.
+blacklist ac97
+blacklist ac97_codec
+blacklist aci
+blacklist ad1816
+blacklist ad1848
+blacklist ad1889
+blacklist adlib_card
+blacklist aedsp16
+blacklist ali5455
+blacklist awe_wave
+blacklist btaudio
+blacklist cmpci
+blacklist cs4232
+blacklist cs4281
+blacklist cs46xx
+blacklist emu10k1
+blacklist es1370
+blacklist es1371
+blacklist esssolo1
+blacklist forte
+blacklist gus
+blacklist i810_audio
+blacklist kahlua
+blacklist mad16
+blacklist maestro
+blacklist maestro3
+blacklist maui
+blacklist mpu401
+blacklist msnd
+blacklist msnd_classic
+blacklist msnd_pinnacle
+blacklist nm256_audio
+blacklist opl3
+blacklist opl3sa
+blacklist opl3sa2
+blacklist pas2
+blacklist pss
+blacklist rme96xx
+blacklist sb
+blacklist sb_lib
+blacklist sgalaxy
+blacklist sonicvibes
+blacklist sound
+blacklist sscape
+blacklist trident
+blacklist trix
+blacklist uart401
+blacklist uart6850
+blacklist v_midi
+blacklist via82cxxx_audio
+blacklist wavefront
+blacklist ymfpci
+
Index: 3.2.10/config/modprobe.d/pcspkr.conf
===================================================================
--- 3.2.10/config/modprobe.d/pcspkr.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/pcspkr.conf (revision 5)
@@ -0,0 +1,10 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Standard PC speaker support:
+# This is the standard driver for the PC motherboard speaker, capable of
+# outputting simple tones of a given frequency. Most users will have better
+# audio hardware and will want this module blacklisted.
+blacklist pcspkr
+
Index: 3.2.10/config/modprobe.d/psmouse.conf
===================================================================
--- 3.2.10/config/modprobe.d/psmouse.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/psmouse.conf (revision 5)
@@ -0,0 +1,10 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# PS/2 mouse support:
+# The default options when the psmouse module can cause problems with KVM
+# switches. If you experience this, you may want to uncomment the line
+# below to use a more basic mouse protocol with the psmouse module:
+#options psmouse proto=imps
+
Index: 3.2.10/config/modprobe.d/scsi-sata-controllers.conf
===================================================================
--- 3.2.10/config/modprobe.d/scsi-sata-controllers.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/scsi-sata-controllers.conf (revision 5)
@@ -0,0 +1,81 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# SCSI and SATA controller modules. Typically these are either
+# built into the kernel or loaded with an initrd already.
+blacklist 3w-xxxx
+blacklist 53c7,8xx
+blacklist AM53C974
+blacklist BusLogic
+blacklist NCR53c406a
+blacklist a100u2w
+blacklist advansys
+blacklist aha152x
+blacklist aha1542
+blacklist aha1740
+blacklist aic79xx
+blacklist aic7xxx
+blacklist aic7xxx_old
+blacklist aic94xx
+blacklist ata_piix
+blacklist atp870u
+blacklist cpqfc
+blacklist dc395x
+blacklist dmx3191d
+blacklist dpt_i2o
+blacklist dtc
+blacklist eata
+blacklist eata_dma
+blacklist eata_pio
+blacklist fdomain
+blacklist g_NCR5380
+blacklist g_NCR5380_mmio
+blacklist gdth
+blacklist ide-scsi
+blacklist imm
+blacklist in2000
+blacklist initio
+blacklist ipr
+blacklist ips
+blacklist libata
+blacklist megaraid
+blacklist ncr53c8xx
+blacklist nsp32
+blacklist osst
+blacklist pas16
+blacklist pci2000
+blacklist pci2220i
+blacklist ppa
+blacklist psi240i
+blacklist qla1280
+blacklist qla2100
+blacklist qla2200
+blacklist qla2300
+blacklist qla2322
+blacklist qla2xxx
+blacklist qla6312
+blacklist qla6322
+blacklist qlogicfas
+blacklist qlogicfas408
+blacklist qlogicfc
+blacklist qlogicisp
+blacklist seagate
+blacklist sim710
+blacklist sata_promise
+blacklist sata_sil
+blacklist sata_sis
+blacklist sata_svw
+blacklist sata_sx4
+blacklist sata_via
+blacklist sata_vsc
+blacklist scsi_debug
+blacklist scsi_transport_fc
+blacklist scsi_transport_spi
+blacklist sym53c416
+blacklist sym53c8xx
+blacklist sym53c8xx
+blacklist t128
+blacklist tmscsim
+blacklist u14-34f
+
Index: 3.2.10/config/modprobe.d/snd-pcsp.conf
===================================================================
--- 3.2.10/config/modprobe.d/snd-pcsp.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/snd-pcsp.conf (revision 5)
@@ -0,0 +1,10 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# ALSA/PCM support for the standard PC speaker:
+# This is an ALSA driver that attempts to output full PCM sound using the very
+# limited hardware of the built-in PC speaker. It doesn't work very well. Most
+# users will have better audio hardware and will want this module blacklisted.
+blacklist snd-pcsp
+
Index: 3.2.10/config/modprobe.d/sound-modems.conf
===================================================================
--- 3.2.10/config/modprobe.d/sound-modems.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/sound-modems.conf (revision 5)
@@ -0,0 +1,10 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# ALSA modules to support sound modems. These should be loaded manually
+# if needed. For most people they just break sound support...
+blacklist snd-atiixp-modem
+blacklist snd-intel8x0m
+blacklist snd-via82xx-modem
+
Index: 3.2.10/config/modprobe.d/tulip.conf
===================================================================
--- 3.2.10/config/modprobe.d/tulip.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/tulip.conf (revision 5)
@@ -0,0 +1,11 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# tulip ... de4x5, xircom_tulip_cb, dmfe (...) handle same devices
+blacklist de4x5
+
+# At least 2.4.3 and later xircom_tulip doesn't have that conflict
+# xircom_tulip_cb
+blacklist dmfe
+
Index: 3.2.10/config/modprobe.d/usb-controller.conf
===================================================================
--- 3.2.10/config/modprobe.d/usb-controller.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/usb-controller.conf (revision 5)
@@ -0,0 +1,9 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# The EHCI driver should be loaded before the ones for low speed controllers
+# or some devices may be confused when they are disconnected and reconnected.
+softdep uhci-hcd pre: ehci-hcd
+softdep ohci-hcd pre: ehci-hcd
+
Index: 3.2.10/config/modprobe.d/via-ircc.conf
===================================================================
--- 3.2.10/config/modprobe.d/via-ircc.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/via-ircc.conf (revision 5)
@@ -0,0 +1,7 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# The kernel lists this as "experimental", but for now it's "broken"
+blacklist via-ircc
+
Index: 3.2.10/config/modprobe.d/watchdog.conf
===================================================================
--- 3.2.10/config/modprobe.d/watchdog.conf (nonexistent)
+++ 3.2.10/config/modprobe.d/watchdog.conf (revision 5)
@@ -0,0 +1,70 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Blacklist all watchdog modules. Many motherboards hang with them, and
+# if you really need a watchdog, you probably know how to load the module.
+blacklist acquirewdt
+blacklist advantechwdt
+blacklist alim1535_wdt
+blacklist alim7101_wdt
+blacklist bcm7038_wdt
+blacklist cadence_wdt
+blacklist cpu5wdt
+blacklist da9062_wdt
+blacklist da9063_wdt
+blacklist dw_wdt
+blacklist ebc_c384_wdt
+blacklist eurotechwdt
+blacklist f71808e_wdt
+blacklist hpwdt
+blacklist i6300esb
+blacklist i8xx_tco
+blacklist iTCO_vendor_support
+blacklist iTCO_wdt
+blacklist ib700wdt
+blacklist ibmasr
+blacklist ie6xx_wdt
+blacklist it8712f_wdt
+blacklist it87_wdt
+blacklist machzwd
+blacklist max63xx_wdt
+blacklist mei_wdt
+blacklist mena21_wdt
+blacklist menf21bmc_wdt
+blacklist mixcomwd
+blacklist mlx_wdt
+blacklist ni903x_wdt
+blacklist nic7018_wdt
+blacklist nv_tco
+blacklist pc87413_wdt
+blacklist pcwd
+blacklist pcwd_pci
+blacklist pcwd_usb
+blacklist rave_sp_wdt
+blacklist retu_wdt
+blacklist rn5t618_wdt
+blacklist sbc60xxwdt
+blacklist sbc7240_wdt
+blacklist sbc8360
+blacklist sbc_epx_c3
+blacklist sbc_fitpc2_wdt
+blacklist sc1200wdt
+blacklist sc520_wdt
+blacklist sch311x_wdt
+blacklist scx200_wdt
+blacklist smsc37b787_wdt
+blacklist softdog
+blacklist sp5100_tco
+blacklist tqmx86_wdt
+blacklist via_wdt
+blacklist w83627hf_wdt
+blacklist w83697hf_wdt
+blacklist w83877f_wdt
+blacklist w83977f_wdt
+blacklist wafer5823wdt
+blacklist wdat_wdt
+blacklist wdt
+blacklist wdt_pci
+blacklist ziirave_wdt
+
Index: 3.2.10/config/modprobe.d
===================================================================
--- 3.2.10/config/modprobe.d (nonexistent)
+++ 3.2.10/config/modprobe.d (revision 5)
Property changes on: 3.2.10/config/modprobe.d
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 3.2.10/config/rc.d/rc.udev.new
===================================================================
--- 3.2.10/config/rc.d/rc.udev.new (nonexistent)
+++ 3.2.10/config/rc.d/rc.udev.new (revision 5)
@@ -0,0 +1,185 @@
+#!/bin/sh
+# This is a script to initialize udev, which populates the /dev
+# directory with device nodes, scans for devices, loads the
+# appropriate kernel modules, and configures the devices.
+
+PATH="/sbin:/bin"
+
+check_mounted() {
+ grep -E -q "^[^[:space:]]+ $1 $2" /proc/mounts
+ return $?
+}
+
+mount_devpts() {
+ if ! check_mounted /dev/pts devpts ; then
+ mkdir /dev/pts 2> /dev/null
+ mount -n -o mode=0620,gid=5 -t devpts devpts /dev/pts
+ fi
+}
+
+mount_devshm() {
+ if ! check_mounted /dev/shm tmpfs ; then
+ mkdir /dev/shm 2> /dev/null
+ mount /dev/shm
+ fi
+}
+
+case "$1" in
+ start)
+ # Sanity check #1, udev requires that the kernel support tmpfs:
+ if ! grep -wq tmpfs /proc/filesystems ; then
+ echo "Sorry, but you need tmpfs support in the kernel to use udev."
+ echo
+ echo "FATAL: Refusing to run /etc/rc.d/rc.udev."
+ exit 1
+ fi
+
+ # Sanity check #2, make sure that a 2.6.x kernel is new enough:
+ if [ "$(uname -r | cut -f 1,2 -d .)" = "2.6" ]; then
+ if [ "$(uname -r | cut -f 3 -d . | sed 's/[^[:digit:]].*//')" -lt "32" ]; then
+ echo "Sorry, but you need a 2.6.32+ kernel to use this udev."
+ echo "Your kernel version is only $(uname -r)."
+ echo
+ echo "FATAL: Refusing to run /etc/rc.d/rc.udev."
+ exit 1
+ fi
+ fi
+
+ # Sanity check #3, make sure the udev package was not removed. If udevd
+ # is not there, this will also shut off this script to prevent further
+ # problems:
+ if [ ! -x /sbin/udevd ]; then
+ chmod 0644 /etc/rc.d/rc.udev
+ echo "No udevd daemon found."
+ echo "Turning off udev: chmod 644 /etc/rc.d/rc.udev"
+ echo "FATAL: Refusing to run /etc/rc.d/rc.udev."
+ exit 1
+ fi
+
+ # Disable hotplug helper since udevd listens to netlink:
+ if [ -e /proc/sys/kernel/hotplug ]; then
+ echo "" > /proc/sys/kernel/hotplug
+ fi
+
+ if grep -qw devtmpfs /proc/filesystems ; then
+ if ! check_mounted /dev devtmpfs ; then
+ # umount shm if needed
+ check_mounted /dev/shm tmpfs && umount -l /dev/shm
+
+ # Umount pts if needed, we will remount it later:
+ check_mounted /dev/pts devpts && umount -l /dev/pts
+
+ # Mount tmpfs on /dev:
+ mount -n -t devtmpfs -o size=8M devtmpfs /dev
+ fi
+ else
+ # Mount tmpfs on /dev:
+ if ! check_mounted /dev tmpfs ; then
+ # umount shm if needed
+ check_mounted /dev/shm tmpfs && umount -l /dev/shm
+
+ # Umount pts if needed, we will remount it later:
+ check_mounted /dev/pts devpts && umount -l /dev/pts
+
+ # Mount tmpfs on /dev:
+ # the -n is because we don't want /dev umounted when
+ # someone (rc.[06]) calls umount -a
+ mount -n -o mode=0755 -t tmpfs -o size=8M tmpfs /dev
+ fi
+ fi
+
+ # Mount devpts
+ mount_devpts
+ mount_devshm
+
+ if ! /sbin/pidof udevd 1>/dev/null 2>/dev/null; then # start udevd
+ echo "Creating static nodes in /dev."
+ kmod static-nodes -f tmpfiles --output /run/static-nodes
+ grep "^d\ " /run/static-nodes | while read line ; do
+ mkdir -p -m $(echo $line | cut -f 3 -d ' ') $(echo $line | cut -f 2 -d ' ')
+ done
+ grep -v "^d\ " /run/static-nodes | while read line ; do
+ mknod -m $(echo $line | cut -f 3 -d ' ') \
+ $(echo $line | cut -f 2 -d ' ') \
+ $(echo $line | cut -b1 ) \
+ $(echo $line | cut -f 7 -d ' ' | cut -f 1 -d :) \
+ $(echo $line | cut -f 7 -d ' ' | cut -f 2 -d :) 2> /dev/null
+ done
+ rm -f /run/static-nodes
+ # Add any system defined additional device nodes:
+ cp --preserve=all --recursive --update /lib/udev/devices/* /dev 2> /dev/null
+ # Add any locally defined additional device nodes:
+ cp --preserve=all --recursive --update /etc/udev/devices/* /dev 2> /dev/null
+ echo "Starting udevd: /sbin/udevd --daemon"
+ /sbin/udevd --daemon
+ # Since udev is just now being started we want to use add events:
+ echo "Triggering udev events: /sbin/udevadm trigger --action=add"
+ # Call udevtrigger and udevsettle to do the device configuration:
+ /sbin/udevadm trigger --type=subsystems --action=add
+ /sbin/udevadm trigger --type=devices --action=add
+ else # trigger changes for already running udevd
+ # If the persistent network rules file does not exist, trigger an add event:
+ if [ ! -r /etc/udev/rules.d/70-persistent-net.rules ]; then
+ # Test that we can actually write to the directory first:
+ if touch /etc/udev/rules.d/testfile 2> /dev/null ; then
+ rm -f /etc/udev/rules.d/testfile
+ # This should add persistent net rules:
+ echo "Triggering udev to write persistent rules to /etc/udev/rules.d/"
+ /sbin/udevadm trigger --type=devices --action=add
+ sleep 3
+ # Create the files if they don't exist at this point.
+ # If a machine does not have a network device or an optical
+ # device, we don't want to waste time trying to generate
+ # rules at every boot.
+ # To force another attempt, delete the file(s).
+ touch /etc/udev/rules.d/70-persistent-net.rules
+ fi
+ fi
+ # Update the hardware database index (/etc/udev/hwdb.bin), if possible:
+ if touch /etc/udev/testfile 2> /dev/null ; then
+ rm -f /etc/udev/testfile
+ echo "Updating hardware database index: /sbin/udevadm hwdb --update"
+ /sbin/udevadm hwdb --update
+ fi
+ # Since udevd is running, most of the time we only need change events:
+ echo "Triggering udev events: /sbin/udevadm trigger --action=change"
+ /sbin/udevadm trigger --type=subsystems --action=change
+ /sbin/udevadm trigger --type=devices --action=change
+ fi
+ /sbin/udevadm settle --timeout=120
+ ;;
+ stop)
+ echo "Stopping udevd is STRONGLY discouraged and not supported."
+ echo "If you are sure you want to do this, use 'force-stop' instead."
+ ;;
+ force-stop)
+ echo "Stopping udevd"
+ udevadm control --exit
+ killall udevd 2>/dev/null
+ ;;
+ restart)
+ echo "Restarting udevd is STRONGLY discouraged and not supported."
+ echo "If you are sure you want to do this, use 'force-restart' instead."
+ ;;
+ force-restart)
+ echo "Restarting udevd"
+ udevadm control --exit
+ sleep 3
+ udevd --daemon
+ ;;
+ reload)
+ echo "Reloading udev rules"
+ udevadm control --reload
+ ;;
+ force-reload)
+ echo "Updating all available device nodes in /dev"
+ udevadm control --reload
+ rm -rf /dev/.udev /dev/disk
+ cp --preserve=all --recursive --update /lib/udev/devices/* /dev 2> /dev/null
+ ;;
+
+ *)
+ echo "Usage: $0 {start|stop|restart|reload|force-reload}"
+ exit 1
+ ;;
+esac
Index: 3.2.10/config/rc.d
===================================================================
--- 3.2.10/config/rc.d (nonexistent)
+++ 3.2.10/config/rc.d (revision 5)
Property changes on: 3.2.10/config/rc.d
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 3.2.10/config/rules.d/40-radix.rules
===================================================================
--- 3.2.10/config/rules.d/40-radix.rules (nonexistent)
+++ 3.2.10/config/rules.d/40-radix.rules (revision 5)
@@ -0,0 +1,24 @@
+# /lib/udev/rules.d/40-radix.rules
+#
+# Radix custom udev rules
+# Also see the following Radix-provided custom rules files:
+# 65-permissions.rules and 90-network.rules
+#
+# Any change in this file will be overwritten in upgrades. Put your
+# custom rules somewhere else (90-local.rules is a good idea).
+#
+# See the udev man page to know the parameters you can use in udev
+# rules.
+#
+
+# input devices
+KERNEL=="mice", SYMLINK+="mouse"
+
+# Set rfkill device writable by netdev group
+KERNEL=="rfkill", GROUP:="netdev", MODE:="0664"
+
+# Mount fusectl filesystem
+KERNEL=="fuse", ACTION=="add", RUN+="/bin/mount -t fusectl fusectl /sys/fs/fuse/connections"
+
+# Set default perms for /dev/ppp:
+KERNEL=="ppp", MODE="0660", GROUP="dialout", OPTIONS+="static_node=ppp"
Index: 3.2.10/config/rules.d/65-permissions.rules
===================================================================
--- 3.2.10/config/rules.d/65-permissions.rules (nonexistent)
+++ 3.2.10/config/rules.d/65-permissions.rules (revision 5)
@@ -0,0 +1,39 @@
+# Radix permission rules
+#
+# These rules are here instead of 40-radix.rules because
+# many of them need to run after the block section in
+# 50-udev.default.rules
+#
+# Remember, in any upgrade, this file will be overwritten.
+# Put your custom rules somewhere else (90-local.rules is
+# a good idea).
+#
+
+# all disks with group disk
+KERNEL!="fd*", SUBSYSTEM=="block", GROUP="disk"
+
+# put all removable devices in group "plugdev"
+KERNEL=="sd*[!0-9]", ATTR{removable}=="1", GROUP="plugdev"
+KERNEL=="sd*[0-9]", ATTRS{removable}=="1", GROUP="plugdev"
+
+# Many hot-pluggable devices (ZIP, Jazz, LS-120, etc...)
+# need to be in plugdev, too.
+KERNEL=="diskonkey*", GROUP="plugdev"
+KERNEL=="jaz*", GROUP="plugdev"
+KERNEL=="pocketzip*", GROUP="plugdev"
+KERNEL=="zip*", GROUP="plugdev"
+KERNEL=="ls120", GROUP="plugdev"
+KERNEL=="microdrive*", GROUP="plugdev"
+
+# CD group and permissions
+ENV{ID_CDROM}=="?*", GROUP="cdrom", MODE="0660"
+KERNEL=="pktcdvd", GROUP="cdrom", MODE="0660"
+KERNEL=="pktcdvd[0-9]*", GROUP="cdrom", MODE="0660"
+# permissions for SCSI sg devices
+SUBSYSTEMS=="scsi", KERNEL=="s[gt][0-9]*", ATTRS{type}=="5", GROUP="cdrom", MODE="0660"
+
+# Make DRI video devices usable by anyone in group "video":
+KERNEL=="card[0-9]*",GROUP:="video"
+
+# Make the real time clock readable by all, and writable by root:
+KERNEL=="rtc|rtc0", MODE="0644"
Index: 3.2.10/config/rules.d
===================================================================
--- 3.2.10/config/rules.d (nonexistent)
+++ 3.2.10/config/rules.d (revision 5)
Property changes on: 3.2.10/config/rules.d
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 3.2.10/config/udev.conf
===================================================================
--- 3.2.10/config/udev.conf (nonexistent)
+++ 3.2.10/config/udev.conf (revision 5)
@@ -0,0 +1,8 @@
+# /etc/udev/udev.conf
+
+# This file can be used to override some of udev's default values
+# See udev(7) for details
+
+# udev_log - The initial syslog(3) priority: "err", "info", "debug"
+udev_log="err"
+
Index: 3.2.10/config
===================================================================
--- 3.2.10/config (nonexistent)
+++ 3.2.10/config (revision 5)
Property changes on: 3.2.10/config
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 3.2.10/eudev-pkg-description.in
===================================================================
--- 3.2.10/eudev-pkg-description.in (nonexistent)
+++ 3.2.10/eudev-pkg-description.in (revision 5)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+eudev: eudev @VERSION@ (dynamic device directory system)
+eudev:
+eudev: udev provides a dynamic device directory containing only the files
+eudev: for the devices which are actually present. It creates or removes
+eudev: device node files usually located in the /dev directory.
+eudev:
+eudev: eudev is a project started by Gentoo developers as a fork of
+eudev: git://anongit.freedesktop.org/systemd/systemd with the aim of
+eudev: isolating udev from any particular flavor of system initialization.
+eudev: Homepage: http://www.gentoo.org/proj/en/eudev/
+eudev:
Index: 3.2.10/eudev-pkg-install.sh
===================================================================
--- 3.2.10/eudev-pkg-install.sh (nonexistent)
+++ 3.2.10/eudev-pkg-install.sh (revision 5)
@@ -0,0 +1,75 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ # Keep same perms on rc.udev.new:
+ if [ -e etc/rc.d/rc.udev ]; then
+ cp -a etc/rc.d/rc.udev etc/rc.d/rc.udev.new.incoming
+ cat etc/rc.d/rc.udev.new > etc/rc.d/rc.udev.new.incoming
+ mv etc/rc.d/rc.udev.new.incoming etc/rc.d/rc.udev.new
+ fi
+
+ # There's no reason for a user to edit rc.udev, so overwrite it:
+ if [ -r etc/rc.d/rc.udev.new ]; then
+ mv etc/rc.d/rc.udev.new etc/rc.d/rc.udev
+ fi
+
+ # This should catch *all* files in /etc/modprobe.d/ and move them over to
+ # have .conf extensions
+ for modfile in `ls etc/modprobe.d/ | grep -v "\.\(conf\|bak\|orig\|new\)"`; do
+ if [ "$modfile" = README ]; then
+ true # do nothing
+ elif [ -e etc/modprobe.d/$modfile -a ! -e etc/modprobe.d/$modfile.conf ]; then
+ mv etc/modprobe.d/$modfile etc/modprobe.d/$modfile.conf
+ elif [ -e etc/modprobe.d/$modfile -a -e etc/modprobe.d/$modfile.conf ]; then
+ mv etc/modprobe.d/$modfile etc/modprobe.d/$modfile.bak
+ fi
+ done
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: 3.2.10/eudev-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 3.2.10
===================================================================
--- 3.2.10 (nonexistent)
+++ 3.2.10 (revision 5)
Property changes on: 3.2.10
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: .
===================================================================
--- . (nonexistent)
+++ . (revision 5)
Property changes on: .
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
383 Commits
1 Branch
1 Tag