Index: radix-1.9/X11/net/libnice/0.1.21/libnice-pkg-description.in
===================================================================
--- radix-1.9/X11/net/libnice/0.1.21/libnice-pkg-description.in (revision 60)
+++ radix-1.9/X11/net/libnice/0.1.21/libnice-pkg-description.in (nonexistent)
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
-# make exactly 11 lines for the formatting to be correct. It's also
-# customary to leave one space after the ':'.
-
- |-----handy-ruler------------------------------------------------------|
-libnice: libnice @VERSION@ (Interactive Connectivity library)
-libnice:
-libnice: libnice is an implementation of the IETF draft Interactive
-libnice: Connectivity Establishment standard (ICE). ICE is useful for
-libnice: applications that want to establish peer-to-peer UDP data streams.
-libnice: Existing standards that use ICE include the Session Initiation
-libnice: Protocol (SIP) and Jingle, XMPP extension for audio/video calls.
-libnice:
-libnice: Homepage: https://libnice.freedesktop.org
-libnice:
-libnice:
Index: radix-1.9/X11/net/libnice/0.1.21/Makefile
===================================================================
--- radix-1.9/X11/net/libnice/0.1.21/Makefile (revision 60)
+++ radix-1.9/X11/net/libnice/0.1.21/Makefile (nonexistent)
@@ -1,320 +0,0 @@
-
-COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
-COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
-COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
-COMPONENT_TARGETS += $(HARDWARE_CB1X)
-COMPONENT_TARGETS += $(HARDWARE_CB2X)
-COMPONENT_TARGETS += $(HARDWARE_CB3X)
-COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
-COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
-COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
-COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
-COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
-COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
-COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
-COMPONENT_TARGETS += $(HARDWARE_POIN2)
-COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
-COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
-COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
-COMPONENT_TARGETS += $(HARDWARE_M201)
-COMPONENT_TARGETS += $(HARDWARE_MXV)
-COMPONENT_TARGETS += $(HARDWARE_P201)
-COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
-COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
-COMPONENT_TARGETS += $(HARDWARE_P212)
-COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
-COMPONENT_TARGETS += $(HARDWARE_Q201)
-COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
-COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
-COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
-COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
-COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
-COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
-COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
-COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
-COMPONENT_TARGETS += $(HARDWARE_CI20)
-COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
-COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
-COMPONENT_TARGETS += $(HARDWARE_S824L)
-COMPONENT_TARGETS += $(HARDWARE_VESNIN)
-COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
-COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
-COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
-COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
-COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
-COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
-COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
-
-
-NEED_ABS_PATH = true
-COMPONENT_IS_3PP = true
-
-
-include ../../../../build-system/constants.mk
-
-
-SOURCE_REQUIRES = sources/packages/n/libnice
-
-REQUIRES = libs/glib2/2.76.0
-REQUIRES += X11/libs/gstreamer/1.22.0
-REQUIRES += net/gnutls/3.8.0
-
-# ======= __END_OF_REQUIRES__ =======
-
-
-version = 0.1.21
-tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/n/libnice/libnice-$(version).tar.gz
-SRC_ARCHIVE = $(tar_gz_archive)
-SRC_DIR = $(TARGET_BUILD_DIR)/libnice-$(version)
-src_dir_name = libnice-$(version)
-src_done = $(TARGET_BUILD_DIR)/.source_done
-
-PATCHES = PATCHES
-
-build_dir = $(TARGET_BUILD_DIR)/build
-build_target = $(TARGET_BUILD_DIR)/.build_done
-install_target = $(TARGET_BUILD_DIR)/.install_done
-
-cross_file = $(TARGET_BUILD_DIR)/$(TARGET)-cross
-
-
-####### Targets
-
-PKG_GROUP = xnet
-
-#
-# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
-#
-LIBNICE_PKG_NAME = libnice
-LIBNICE_PKG_VERSION = 0.1.21
-LIBNICE_PKG_ARCH = $(PKGARCH)
-LIBNICE_PKG_DISTRO_NAME = $(DISTRO_NAME)
-LIBNICE_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
-LIBNICE_PKG_GROUP = $(PKG_GROUP)
-### |---handy-ruler-------------------------------|
-LIBNICE_PKG_SHORT_DESCRIPTION = Interactive Connectivity library
-LIBNICE_PKG_URL = $(BUG_URL)
-LIBNICE_PKG_LICENSE = LGPLv2.1
-LIBNICE_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(LIBNICE_PKG_NAME)-pkg-description
-LIBNICE_PKG_DESCRIPTION_FILE_IN = $(LIBNICE_PKG_NAME)-pkg-description.in
-LIBNICE_PKG_INSTALL_SCRIPT = $(LIBNICE_PKG_NAME)-pkg-install.sh
-
-LIBNICE_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(LIBNICE_PKG_NAME)-package
-
-pkg_basename = $(LIBNICE_PKG_NAME)-$(LIBNICE_PKG_VERSION)-$(LIBNICE_PKG_ARCH)-$(LIBNICE_PKG_DISTRO_NAME)-$(LIBNICE_PKG_DISTRO_VERSION)
-
-pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
-pkg_signature = $(call sign-name,$(pkg_archive))
-pkg_description = $(call desc-name,$(pkg_archive))
-products = $(call pkg-files,$(pkg_archive))
-
-BUILD_TARGETS = $(build_target)
-BUILD_TARGETS += $(install_target)
-
-PRODUCT_TARGETS = $(products)
-
-ROOTFS_TARGETS = $(pkg_archive)
-
-
-include ../../../../build-system/core.mk
-
-
-env_sysroot = DESTDIR=$(LIBNICE_PKG)
-
-
-#
-# https://mesonbuild.com/Reference-tables.html :
-# =============================================
-#
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_A1X_GLIBC) $(TOOLCHAIN_A2X_GLIBC) \
- $(TOOLCHAIN_H3_GLIBC) $(TOOLCHAIN_RK328X_GLIBC) \
- $(TOOLCHAIN_S8XX_GLIBC) $(TOOLCHAIN_IMX6_GLIBC) \
- $(TOOLCHAIN_AM335X_GLIBC) $(TOOLCHAIN_OMAP543X_GLIBC)),)
-cpu_name = arm
-endian = little
-endif
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_H5_GLIBC) $(TOOLCHAIN_RK33XX_GLIBC) \
- $(TOOLCHAIN_RK339X_GLIBC) $(TOOLCHAIN_RK358X_GLIBC) \
- $(TOOLCHAIN_S9XX_GLIBC) \
- $(TOOLCHAIN_A311X_GLIBC) $(TOOLCHAIN_M1000_GLIBC)),)
-cpu_name = aarch64
-endian = little
-endif
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_JZ47XX_GLIBC) $(TOOLCHAIN_P5600_GLIBC)),)
-cpu_name = mips
-endian = little
-endif
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8_GLIBC) $(TOOLCHAIN_POWER9_GLIBC)),)
-cpu_name = ppc64
-endian = big
-endif
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8LE_GLIBC) $(TOOLCHAIN_POWER9LE_GLIBC)),)
-cpu_name = ppc64
-endian = little
-endif
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_RISCV64_GLIBC)),)
-cpu_name = riscv64
-endian = little
-endif
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_I586_GLIBC) $(TOOLCHAIN_I686_GLIBC)),)
-cpu_name = x86
-endian = little
-endif
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_X86_64_GLIBC)),)
-cpu_name = x86_64
-endian = little
-endif
-
-
-ifeq ($(__ENABLE_STATIC__),yes)
-extra_configure_switches += --default-library=both
-else
-extra_configure_switches += --default-library=shared
-endif
-
-
-extra_configure_switches += -Dgupnp=disabled
-extra_configure_switches += -Dgstreamer=enabled
-extra_configure_switches += -Dcrypto-library=gnutls
-
-extra_configure_switches += -Dintrospection=disabled
-extra_configure_switches += -Dexamples=disabled
-
-extra_configure_switches += -Dgtk_doc=disabled
-
-
-TARGET_BIN_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)
-
-LDFLAGS += -Wl,-rpath,$(TARGET_BIN_RPATH)
-
-
-####### Dependencies
-
-$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
- $(UNPACK_SRC_ARCHIVE)
- $(APPLY_PATCHES)
- @touch $@
-
-$(build_target): $(src_done)
- @mkdir -p $(build_dir)
- @echo "" > $(cross_file)
- @echo "[build_machine]" >> $(cross_file)
- @echo "system = '$(shell uname -s | tr 'L' 'l')'" >> $(cross_file)
- @echo "cpu_family = '$(shell uname -m)'" >> $(cross_file)
- @echo "cpu = '$(shell uname -m)'" >> $(cross_file)
- @echo "endian = '$(shell lscpu | grep Endian | tr -s ' ' | cut -f3 -d' ' | tr 'L' 'l')'" >> $(cross_file)
- @echo "" >> $(cross_file)
- @echo "[host_machine]" >> $(cross_file)
- @echo "system = 'linux'" >> $(cross_file)
- @echo "cpu_family = '$(cpu_name)'" >> $(cross_file)
- @echo "cpu = '$(cpu_name)'" >> $(cross_file)
- @echo "endian = '$(endian)'" >> $(cross_file)
- @echo "" >> $(cross_file)
- @echo "[target_machine]" >> $(cross_file)
- @echo "system = 'linux'" >> $(cross_file)
- @echo "cpu_family = '$(cpu_name)'" >> $(cross_file)
- @echo "cpu = '$(cpu_name)'" >> $(cross_file)
- @echo "endian = '$(endian)'" >> $(cross_file)
- @echo "" >> $(cross_file)
- @echo "[binaries]" >> $(cross_file)
- @echo "c = '$(TOOLCHAIN_PATH)/bin/$(TARGET)-gcc'" >> $(cross_file)
- @echo "cpp = '$(TOOLCHAIN_PATH)/bin/$(TARGET)-g++'" >> $(cross_file)
- @echo "ar = '$(AR)'" >> $(cross_file)
- @echo "strip = '$(STRIP)'" >> $(cross_file)
- @echo "pkgconfig = 'pkg-config'" >> $(cross_file)
- @echo "" >> $(cross_file)
- @meson setup \
- --prefix=/usr \
- --libdir=lib$(LIBSUFFIX) \
- --libexecdir=/usr/libexec \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --includedir=/usr/include \
- --datadir=/usr/share \
- --mandir=/usr/share/man \
- --sysconfdir=/etc \
- --localstatedir=/var \
- --buildtype=release \
- -Dc_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(CFLAGS)" | tr -s ' '`" \
- -Dc_link_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(LDFLAGS)" | tr -s ' '`" \
- -Dcpp_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(CFLAGS)" | tr -s ' '`" \
- -Dcpp_link_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(LDFLAGS)" | tr -s ' '`" \
- -Dtests=disabled \
- $(extra_configure_switches) \
- --cross-file=$(cross_file) $(SRC_DIR) $(build_dir)
- @cd $(build_dir) && ninja -v
- @touch $@
-
-$(install_target): $(build_target)
- @mkdir -p $(LIBNICE_PKG)
- @cd $(build_dir) && $(env_sysroot) ninja install
- # ======= Install Documentation =======
- @if [ -d $(LIBNICE_PKG)/usr/share/man ]; then \
- ( cd $(LIBNICE_PKG)/usr/share/man ; \
- for manpagedir in `find . -type d -name "man*"` ; do \
- ( cd $$manpagedir ; \
- for eachpage in `find . -type l -maxdepth 1` ; do \
- ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
- rm $$eachpage ; \
- done ; \
- gzip -9 *.? ; \
- ) \
- done \
- ) \
- fi
- @mkdir -p $(LIBNICE_PKG)/usr/doc/$(src_dir_name)
- @cp -a $(SRC_DIR)/AUTHORS $(SRC_DIR)/COPYING* \
- $(LIBNICE_PKG)/usr/doc/$(src_dir_name)
- @mkdir -p $(LIBNICE_PKG)/usr/share/doc/$(src_dir_name)
- @( cd $(SRC_DIR) ; \
- cp -a AUTHORS COPYING* README TODO \
- $(LIBNICE_PKG)/usr/share/doc/$(src_dir_name) ; \
- )
- @( cd $(SRC_DIR) ; \
- if [ -r NEWS ]; then \
- DOCSDIR=`echo $(LIBNICE_PKG)/usr/share/doc/$(src_dir_name)` ; \
- cat NEWS | head -n 1000 > $$DOCSDIR/NEWS ; \
- touch -r NEWS $$DOCSDIR/NEWS ; \
- fi \
- )
- # ======= Install the same to $(TARGET_DEST_DIR) =======
- $(call install-into-devenv, $(LIBNICE_PKG))
- # ======= tune pkg-config *.pc search path to the target destination for development =======
- @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
- sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" nice.pc ; \
- )
- # ======= Strip binaries =======
- @( cd $(LIBNICE_PKG); \
- find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
- find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
- )
-ifeq ($(__ENABLE_STATIC__),yes)
- @( cd $(LIBNICE_PKG) ; \
- find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
- )
-endif
- @touch $@
-
-$(LIBNICE_PKG_DESCRIPTION_FILE): $(LIBNICE_PKG_DESCRIPTION_FILE_IN)
- @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
-
-$(pkg_certificate) : $(pkg_archive) ;
-$(pkg_signature) : $(pkg_archive) ;
-$(pkg_description) : $(pkg_archive) ;
-
-$(pkg_archive): $(install_target) $(LIBNICE_PKG_DESCRIPTION_FILE) $(LIBNICE_PKG_INSTALL_SCRIPT)
- @cp $(LIBNICE_PKG_DESCRIPTION_FILE) $(LIBNICE_PKG)/.DESCRIPTION
- @cp $(LIBNICE_PKG_INSTALL_SCRIPT) $(LIBNICE_PKG)/.INSTALL
- @$(BUILD_PKG_REQUIRES) $(LIBNICE_PKG)/.REQUIRES
- @echo "pkgname=$(LIBNICE_PKG_NAME)" > $(LIBNICE_PKG)/.PKGINFO ; \
- echo "pkgver=$(LIBNICE_PKG_VERSION)" >> $(LIBNICE_PKG)/.PKGINFO ; \
- echo "arch=$(LIBNICE_PKG_ARCH)" >> $(LIBNICE_PKG)/.PKGINFO ; \
- echo "distroname=$(LIBNICE_PKG_DISTRO_NAME)" >> $(LIBNICE_PKG)/.PKGINFO ; \
- echo "distrover=$(LIBNICE_PKG_DISTRO_VERSION)" >> $(LIBNICE_PKG)/.PKGINFO ; \
- echo "group=$(LIBNICE_PKG_GROUP)" >> $(LIBNICE_PKG)/.PKGINFO ; \
- echo "short_description=\"$(LIBNICE_PKG_SHORT_DESCRIPTION)\"" >> $(LIBNICE_PKG)/.PKGINFO ; \
- echo "url=$(LIBNICE_PKG_URL)" >> $(LIBNICE_PKG)/.PKGINFO ; \
- echo "license=$(LIBNICE_PKG_LICENSE)" >> $(LIBNICE_PKG)/.PKGINFO
- @$(PSEUDO) sh -c "cd $(LIBNICE_PKG) && \
- chown -R root:root . && \
- $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: radix-1.9/X11/net/libnice/0.1.21/libnice-pkg-install.sh
===================================================================
--- radix-1.9/X11/net/libnice/0.1.21/libnice-pkg-install.sh (revision 60)
+++ radix-1.9/X11/net/libnice/0.1.21/libnice-pkg-install.sh (nonexistent)
@@ -1,53 +0,0 @@
-#!/bin/sh
-
-# Preserve new files
-install_file() {
- NEW="$1"
- OLD="`dirname $NEW`/`basename $NEW .new`"
- # If there's no file by that name, mv it over:
- if [ ! -r $OLD ]; then
- mv $NEW $OLD
- elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
- rm $NEW
- fi
- # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-
-# arg 1: the new package version
-pre_install() {
- /bin/true
-}
-
-# arg 1: the new package version
-post_install() {
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-pre_update() {
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-post_update() {
- post_install
-}
-
-# arg 1: the old package version
-pre_remove() {
- /bin/true
-}
-
-# arg 1: the old package version
-post_remove() {
- /bin/true
-}
-
-
-operation=$1
-shift
-
-$operation $*
Property changes on: radix-1.9/X11/net/libnice/0.1.21/libnice-pkg-install.sh
___________________________________________________________________
Deleted: svn:executable
## -1 +0,0 ##
-*
\ No newline at end of property
Index: radix-1.9/X11/net/libnice/0.1.21
===================================================================
--- radix-1.9/X11/net/libnice/0.1.21 (revision 60)
+++ radix-1.9/X11/net/libnice/0.1.21 (nonexistent)
Property changes on: radix-1.9/X11/net/libnice/0.1.21
___________________________________________________________________
Deleted: svn:ignore
## -1,74 +0,0 ##
-
-# install dir
-dist
-
-# Target build dirs
-.a1x-newlib
-.a2x-newlib
-.at91sam7s-newlib
-
-.build-machine
-
-.a1x-glibc
-.a2x-glibc
-.h3-glibc
-.h5-glibc
-.i586-glibc
-.i686-glibc
-.imx6-glibc
-.jz47xx-glibc
-.makefile
-.am335x-glibc
-.omap543x-glibc
-.p5600-glibc
-.power8-glibc
-.power8le-glibc
-.power9-glibc
-.power9le-glibc
-.m1000-glibc
-.riscv64-glibc
-.rk328x-glibc
-.rk33xx-glibc
-.rk339x-glibc
-.rk358x-glibc
-.s8xx-glibc
-.s9xx-glibc
-.x86_64-glibc
-
-# Hidden files (each file)
-.makefile
-.dist
-.rootfs
-
-# src & hw requires
-.src_requires
-.src_requires_depend
-.requires
-.requires_depend
-
-# Tarballs
-*.gz
-*.bz2
-*.lz
-*.xz
-*.tgz
-*.txz
-
-# Signatures
-*.asc
-*.sig
-*.sign
-*.sha1sum
-
-# Patches
-*.patch
-
-# Descriptions
-*.dsc
-*.txt
-
-# Default linux config files
-*.defconfig
-
-# backup copies
-*~
Index: radix-1.9/net/libnice/0.1.21/Makefile
===================================================================
--- radix-1.9/net/libnice/0.1.21/Makefile (nonexistent)
+++ radix-1.9/net/libnice/0.1.21/Makefile (revision 61)
@@ -0,0 +1,319 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/n/libnice
+
+REQUIRES = libs/glib2/2.76.0
+REQUIRES += net/gnutls/3.8.0
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 0.1.21
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/n/libnice/libnice-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/libnice-$(version)
+src_dir_name = libnice-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+cross_file = $(TARGET_BUILD_DIR)/$(TARGET)-cross
+
+
+####### Targets
+
+PKG_GROUP = net
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+LIBNICE_PKG_NAME = libnice
+LIBNICE_PKG_VERSION = 0.1.21
+LIBNICE_PKG_ARCH = $(PKGARCH)
+LIBNICE_PKG_DISTRO_NAME = $(DISTRO_NAME)
+LIBNICE_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+LIBNICE_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+LIBNICE_PKG_SHORT_DESCRIPTION = Interactive Connectivity library
+LIBNICE_PKG_URL = $(BUG_URL)
+LIBNICE_PKG_LICENSE = LGPLv2.1
+LIBNICE_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(LIBNICE_PKG_NAME)-pkg-description
+LIBNICE_PKG_DESCRIPTION_FILE_IN = $(LIBNICE_PKG_NAME)-pkg-description.in
+LIBNICE_PKG_INSTALL_SCRIPT = $(LIBNICE_PKG_NAME)-pkg-install.sh
+
+LIBNICE_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(LIBNICE_PKG_NAME)-package
+
+pkg_basename = $(LIBNICE_PKG_NAME)-$(LIBNICE_PKG_VERSION)-$(LIBNICE_PKG_ARCH)-$(LIBNICE_PKG_DISTRO_NAME)-$(LIBNICE_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(LIBNICE_PKG)
+
+
+#
+# https://mesonbuild.com/Reference-tables.html :
+# =============================================
+#
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_A1X_GLIBC) $(TOOLCHAIN_A2X_GLIBC) \
+ $(TOOLCHAIN_H3_GLIBC) $(TOOLCHAIN_RK328X_GLIBC) \
+ $(TOOLCHAIN_S8XX_GLIBC) $(TOOLCHAIN_IMX6_GLIBC) \
+ $(TOOLCHAIN_AM335X_GLIBC) $(TOOLCHAIN_OMAP543X_GLIBC)),)
+cpu_name = arm
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_H5_GLIBC) $(TOOLCHAIN_RK33XX_GLIBC) \
+ $(TOOLCHAIN_RK339X_GLIBC) $(TOOLCHAIN_RK358X_GLIBC) \
+ $(TOOLCHAIN_S9XX_GLIBC) \
+ $(TOOLCHAIN_A311X_GLIBC) $(TOOLCHAIN_M1000_GLIBC)),)
+cpu_name = aarch64
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_JZ47XX_GLIBC) $(TOOLCHAIN_P5600_GLIBC)),)
+cpu_name = mips
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8_GLIBC) $(TOOLCHAIN_POWER9_GLIBC)),)
+cpu_name = ppc64
+endian = big
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8LE_GLIBC) $(TOOLCHAIN_POWER9LE_GLIBC)),)
+cpu_name = ppc64
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_RISCV64_GLIBC)),)
+cpu_name = riscv64
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_I586_GLIBC) $(TOOLCHAIN_I686_GLIBC)),)
+cpu_name = x86
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_X86_64_GLIBC)),)
+cpu_name = x86_64
+endian = little
+endif
+
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --default-library=both
+else
+extra_configure_switches += --default-library=shared
+endif
+
+
+extra_configure_switches += -Dgupnp=disabled
+extra_configure_switches += -Dgstreamer=disabled
+extra_configure_switches += -Dcrypto-library=gnutls
+
+extra_configure_switches += -Dintrospection=disabled
+extra_configure_switches += -Dexamples=disabled
+
+extra_configure_switches += -Dgtk_doc=disabled
+
+
+TARGET_BIN_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_BIN_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @echo "" > $(cross_file)
+ @echo "[build_machine]" >> $(cross_file)
+ @echo "system = '$(shell uname -s | tr 'L' 'l')'" >> $(cross_file)
+ @echo "cpu_family = '$(shell uname -m)'" >> $(cross_file)
+ @echo "cpu = '$(shell uname -m)'" >> $(cross_file)
+ @echo "endian = '$(shell lscpu | grep Endian | tr -s ' ' | cut -f3 -d' ' | tr 'L' 'l')'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[host_machine]" >> $(cross_file)
+ @echo "system = 'linux'" >> $(cross_file)
+ @echo "cpu_family = '$(cpu_name)'" >> $(cross_file)
+ @echo "cpu = '$(cpu_name)'" >> $(cross_file)
+ @echo "endian = '$(endian)'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[target_machine]" >> $(cross_file)
+ @echo "system = 'linux'" >> $(cross_file)
+ @echo "cpu_family = '$(cpu_name)'" >> $(cross_file)
+ @echo "cpu = '$(cpu_name)'" >> $(cross_file)
+ @echo "endian = '$(endian)'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[binaries]" >> $(cross_file)
+ @echo "c = '$(TOOLCHAIN_PATH)/bin/$(TARGET)-gcc'" >> $(cross_file)
+ @echo "cpp = '$(TOOLCHAIN_PATH)/bin/$(TARGET)-g++'" >> $(cross_file)
+ @echo "ar = '$(AR)'" >> $(cross_file)
+ @echo "strip = '$(STRIP)'" >> $(cross_file)
+ @echo "pkgconfig = 'pkg-config'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @meson setup \
+ --prefix=/usr \
+ --libdir=lib$(LIBSUFFIX) \
+ --libexecdir=/usr/libexec \
+ --bindir=/usr/bin \
+ --sbindir=/usr/sbin \
+ --includedir=/usr/include \
+ --datadir=/usr/share \
+ --mandir=/usr/share/man \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --buildtype=release \
+ -Dc_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(CFLAGS)" | tr -s ' '`" \
+ -Dc_link_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(LDFLAGS)" | tr -s ' '`" \
+ -Dcpp_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(CFLAGS)" | tr -s ' '`" \
+ -Dcpp_link_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(LDFLAGS)" | tr -s ' '`" \
+ -Dtests=disabled \
+ $(extra_configure_switches) \
+ --cross-file=$(cross_file) $(SRC_DIR) $(build_dir)
+ @cd $(build_dir) && ninja -v
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(LIBNICE_PKG)
+ @cd $(build_dir) && $(env_sysroot) ninja install
+ # ======= Install Documentation =======
+ @if [ -d $(LIBNICE_PKG)/usr/share/man ]; then \
+ ( cd $(LIBNICE_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(LIBNICE_PKG)/usr/doc/$(src_dir_name)
+ @cp -a $(SRC_DIR)/AUTHORS $(SRC_DIR)/COPYING* \
+ $(LIBNICE_PKG)/usr/doc/$(src_dir_name)
+ @mkdir -p $(LIBNICE_PKG)/usr/share/doc/$(src_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a AUTHORS COPYING* README TODO \
+ $(LIBNICE_PKG)/usr/share/doc/$(src_dir_name) ; \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r NEWS ]; then \
+ DOCSDIR=`echo $(LIBNICE_PKG)/usr/share/doc/$(src_dir_name)` ; \
+ cat NEWS | head -n 1000 > $$DOCSDIR/NEWS ; \
+ touch -r NEWS $$DOCSDIR/NEWS ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(LIBNICE_PKG))
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" nice.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(LIBNICE_PKG); \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(LIBNICE_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ @touch $@
+
+$(LIBNICE_PKG_DESCRIPTION_FILE): $(LIBNICE_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(LIBNICE_PKG_DESCRIPTION_FILE) $(LIBNICE_PKG_INSTALL_SCRIPT)
+ @cp $(LIBNICE_PKG_DESCRIPTION_FILE) $(LIBNICE_PKG)/.DESCRIPTION
+ @cp $(LIBNICE_PKG_INSTALL_SCRIPT) $(LIBNICE_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(LIBNICE_PKG)/.REQUIRES
+ @echo "pkgname=$(LIBNICE_PKG_NAME)" > $(LIBNICE_PKG)/.PKGINFO ; \
+ echo "pkgver=$(LIBNICE_PKG_VERSION)" >> $(LIBNICE_PKG)/.PKGINFO ; \
+ echo "arch=$(LIBNICE_PKG_ARCH)" >> $(LIBNICE_PKG)/.PKGINFO ; \
+ echo "distroname=$(LIBNICE_PKG_DISTRO_NAME)" >> $(LIBNICE_PKG)/.PKGINFO ; \
+ echo "distrover=$(LIBNICE_PKG_DISTRO_VERSION)" >> $(LIBNICE_PKG)/.PKGINFO ; \
+ echo "group=$(LIBNICE_PKG_GROUP)" >> $(LIBNICE_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(LIBNICE_PKG_SHORT_DESCRIPTION)\"" >> $(LIBNICE_PKG)/.PKGINFO ; \
+ echo "url=$(LIBNICE_PKG_URL)" >> $(LIBNICE_PKG)/.PKGINFO ; \
+ echo "license=$(LIBNICE_PKG_LICENSE)" >> $(LIBNICE_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(LIBNICE_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: radix-1.9/net/libnice/0.1.21/PATCHES
===================================================================
Index: radix-1.9/net/libnice/0.1.21/libnice-pkg-description.in
===================================================================
--- radix-1.9/net/libnice/0.1.21/libnice-pkg-description.in (nonexistent)
+++ radix-1.9/net/libnice/0.1.21/libnice-pkg-description.in (revision 61)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+libnice: libnice @VERSION@ (Interactive Connectivity library)
+libnice:
+libnice: libnice is an implementation of the IETF draft Interactive
+libnice: Connectivity Establishment standard (ICE). ICE is useful for
+libnice: applications that want to establish peer-to-peer UDP data streams.
+libnice: Existing standards that use ICE include the Session Initiation
+libnice: Protocol (SIP) and Jingle, XMPP extension for audio/video calls.
+libnice:
+libnice: Homepage: https://libnice.freedesktop.org
+libnice:
+libnice:
Index: radix-1.9/net/libnice/0.1.21/libnice-pkg-install.sh
===================================================================
--- radix-1.9/net/libnice/0.1.21/libnice-pkg-install.sh (nonexistent)
+++ radix-1.9/net/libnice/0.1.21/libnice-pkg-install.sh (revision 61)
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: radix-1.9/net/libnice/0.1.21/libnice-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: radix-1.9/net/libnice/0.1.21
===================================================================
--- radix-1.9/net/libnice/0.1.21 (nonexistent)
+++ radix-1.9/net/libnice/0.1.21 (revision 61)
Property changes on: radix-1.9/net/libnice/0.1.21
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/net/libnice/0.1.21-ppc32/Makefile
===================================================================
--- radix-1.9/net/libnice/0.1.21-ppc32/Makefile (nonexistent)
+++ radix-1.9/net/libnice/0.1.21-ppc32/Makefile (revision 61)
@@ -0,0 +1,213 @@
+
+COMPONENT_TARGETS = $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+CREATE_PPC32_PACKAGE = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/n/libnice
+
+REQUIRES = net/libnice/0.1.21
+REQUIRES = libs/glib2/2.76.0-ppc32
+REQUIRES += net/gnutls/3.8.0-ppc32
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 0.1.21
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/n/libnice/libnice-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/libnice-$(version)
+src_dir_name = libnice-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+cross_file = $(TARGET_BUILD_DIR)/$(TARGET32)-cross
+
+
+####### Targets
+
+PKG_GROUP = net
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+LIBNICE_32_PKG_NAME = libnice-x32
+LIBNICE_32_PKG_VERSION = 0.1.21
+LIBNICE_32_PKG_ARCH = $(PKGARCH)
+LIBNICE_32_PKG_DISTRO_NAME = $(DISTRO_NAME)
+LIBNICE_32_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+LIBNICE_32_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+LIBNICE_32_PKG_SHORT_DESCRIPTION = Interactive Connectivity library
+LIBNICE_32_PKG_URL = $(BUG_URL)
+LIBNICE_32_PKG_LICENSE = LGPLv2.1
+LIBNICE_32_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(LIBNICE_32_PKG_NAME)-pkg-description
+LIBNICE_32_PKG_DESCRIPTION_FILE_IN = $(LIBNICE_32_PKG_NAME)-pkg-description.in
+LIBNICE_32_PKG_INSTALL_SCRIPT = $(LIBNICE_32_PKG_NAME)-pkg-install.sh
+
+LIBNICE_32_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(LIBNICE_32_PKG_NAME)-package
+
+pkg_basename = $(LIBNICE_32_PKG_NAME)-$(LIBNICE_32_PKG_VERSION)-$(LIBNICE_32_PKG_ARCH)-$(LIBNICE_32_PKG_DISTRO_NAME)-$(LIBNICE_32_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(LIBNICE_32_PKG)
+
+
+cpu_name = ppc
+endian = big
+
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --default-library=both
+else
+extra_configure_switches += --default-library=shared
+endif
+
+
+extra_configure_switches += -Dgupnp=disabled
+extra_configure_switches += -Dgstreamer=disabled
+extra_configure_switches += -Dcrypto-library=gnutls
+
+extra_configure_switches += -Dintrospection=disabled
+extra_configure_switches += -Dexamples=disabled
+
+extra_configure_switches += -Dgtk_doc=disabled
+
+
+TARGET_BIN_RPATH = /lib$(MULTILIB_PPC32_SUFFIX):/usr/lib$(MULTILIB_PPC32_SUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_BIN_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @echo "" > $(cross_file)
+ @echo "[build_machine]" >> $(cross_file)
+ @echo "system = '$(shell uname -s | tr 'L' 'l')'" >> $(cross_file)
+ @echo "cpu_family = '$(shell uname -m)'" >> $(cross_file)
+ @echo "cpu = '$(shell uname -m)'" >> $(cross_file)
+ @echo "endian = '$(shell lscpu | grep Endian | tr -s ' ' | cut -f3 -d' ' | tr 'L' 'l')'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[host_machine]" >> $(cross_file)
+ @echo "system = 'linux'" >> $(cross_file)
+ @echo "cpu_family = '$(cpu_name)'" >> $(cross_file)
+ @echo "cpu = '$(cpu_name)'" >> $(cross_file)
+ @echo "endian = '$(endian)'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[target_machine]" >> $(cross_file)
+ @echo "system = 'linux'" >> $(cross_file)
+ @echo "cpu_family = '$(cpu_name)'" >> $(cross_file)
+ @echo "cpu = '$(cpu_name)'" >> $(cross_file)
+ @echo "endian = '$(endian)'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[binaries]" >> $(cross_file)
+ @echo "c = '$(TOOLCHAIN_PATH)/bin/$(TARGET)-gcc'" >> $(cross_file)
+ @echo "cpp = '$(TOOLCHAIN_PATH)/bin/$(TARGET)-g++'" >> $(cross_file)
+ @echo "ar = '$(AR)'" >> $(cross_file)
+ @echo "strip = '$(STRIP)'" >> $(cross_file)
+ @echo "pkgconfig = 'pkg-config'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @meson setup \
+ --prefix=/usr \
+ --libdir=lib$(MULTILIB_PPC32_SUFFIX) \
+ --libexecdir=/usr/libexec/32 \
+ --bindir=/usr/bin/32 \
+ --sbindir=/usr/sbin \
+ --includedir=/usr/include \
+ --datadir=/usr/share \
+ --mandir=/usr/share/man \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --buildtype=release \
+ -Dc_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(CFLAGS)" | tr -s ' '`" \
+ -Dc_link_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) -m32 $(LDFLAGS)" | tr -s ' '`" \
+ -Dcpp_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(CFLAGS)" | tr -s ' '`" \
+ -Dcpp_link_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) -m32 $(LDFLAGS)" | tr -s ' '`" \
+ -Dtests=disabled \
+ $(extra_configure_switches) \
+ --cross-file=$(cross_file) $(SRC_DIR) $(build_dir)
+ @cd $(build_dir) && ninja -v
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(LIBNICE_32_PKG)
+ @cd $(build_dir) && $(env_sysroot) ninja install
+ @rm -rf $(LIBNICE_32_PKG)/usr/include
+ @rm -rf $(LIBNICE_32_PKG)/usr/share
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(LIBNICE_32_PKG))
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_PPC32_SUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" nice.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(LIBNICE_32_PKG); \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(LIBNICE_32_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ @touch $@
+
+$(LIBNICE_32_PKG_DESCRIPTION_FILE): $(LIBNICE_32_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(LIBNICE_32_PKG_DESCRIPTION_FILE) $(LIBNICE_32_PKG_INSTALL_SCRIPT)
+ @cp $(LIBNICE_32_PKG_DESCRIPTION_FILE) $(LIBNICE_32_PKG)/.DESCRIPTION
+ @cp $(LIBNICE_32_PKG_INSTALL_SCRIPT) $(LIBNICE_32_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(LIBNICE_32_PKG)/.REQUIRES
+ @echo "pkgname=$(LIBNICE_32_PKG_NAME)" > $(LIBNICE_32_PKG)/.PKGINFO ; \
+ echo "pkgver=$(LIBNICE_32_PKG_VERSION)" >> $(LIBNICE_32_PKG)/.PKGINFO ; \
+ echo "arch=$(LIBNICE_32_PKG_ARCH)" >> $(LIBNICE_32_PKG)/.PKGINFO ; \
+ echo "distroname=$(LIBNICE_32_PKG_DISTRO_NAME)" >> $(LIBNICE_32_PKG)/.PKGINFO ; \
+ echo "distrover=$(LIBNICE_32_PKG_DISTRO_VERSION)" >> $(LIBNICE_32_PKG)/.PKGINFO ; \
+ echo "group=$(LIBNICE_32_PKG_GROUP)" >> $(LIBNICE_32_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(LIBNICE_32_PKG_SHORT_DESCRIPTION)\"" >> $(LIBNICE_32_PKG)/.PKGINFO ; \
+ echo "url=$(LIBNICE_32_PKG_URL)" >> $(LIBNICE_32_PKG)/.PKGINFO ; \
+ echo "license=$(LIBNICE_32_PKG_LICENSE)" >> $(LIBNICE_32_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(LIBNICE_32_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: radix-1.9/net/libnice/0.1.21-ppc32/PATCHES
===================================================================
Index: radix-1.9/net/libnice/0.1.21-ppc32/libnice-x32-pkg-description.in
===================================================================
--- radix-1.9/net/libnice/0.1.21-ppc32/libnice-x32-pkg-description.in (nonexistent)
+++ radix-1.9/net/libnice/0.1.21-ppc32/libnice-x32-pkg-description.in (revision 61)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+libnice-x32: libnice-x32 @VERSION@ (Interactive Connectivity library)
+libnice-x32:
+libnice-x32: libnice is an implementation of the IETF draft Interactive
+libnice-x32: Connectivity Establishment standard (ICE). ICE is useful for
+libnice-x32: applications that want to establish peer-to-peer UDP data streams.
+libnice-x32: Existing standards that use ICE include the Session Initiation
+libnice-x32: Protocol (SIP) and Jingle, XMPP extension for audio/video calls.
+libnice-x32:
+libnice-x32: Homepage: https://libnice.freedesktop.org
+libnice-x32:
+libnice-x32:
Index: radix-1.9/net/libnice/0.1.21-ppc32/libnice-x32-pkg-install.sh
===================================================================
--- radix-1.9/net/libnice/0.1.21-ppc32/libnice-x32-pkg-install.sh (nonexistent)
+++ radix-1.9/net/libnice/0.1.21-ppc32/libnice-x32-pkg-install.sh (revision 61)
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: radix-1.9/net/libnice/0.1.21-ppc32/libnice-x32-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: radix-1.9/net/libnice/0.1.21-ppc32
===================================================================
--- radix-1.9/net/libnice/0.1.21-ppc32 (nonexistent)
+++ radix-1.9/net/libnice/0.1.21-ppc32 (revision 61)
Property changes on: radix-1.9/net/libnice/0.1.21-ppc32
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/net/libnice/0.1.21-x86_32/Makefile
===================================================================
--- radix-1.9/net/libnice/0.1.21-x86_32/Makefile (nonexistent)
+++ radix-1.9/net/libnice/0.1.21-x86_32/Makefile (revision 61)
@@ -0,0 +1,210 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC64)
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+CREATE_X86_32_PACKAGE = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/n/libnice
+
+REQUIRES = net/libnice/0.1.21
+REQUIRES = libs/glib2/2.76.0-x86_32
+REQUIRES += net/gnutls/3.8.0-x86_32
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 0.1.21
+tar_gz_archive = $(SRC_PACKAGE_PATH)/packages/n/libnice/libnice-$(version).tar.gz
+SRC_ARCHIVE = $(tar_gz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/libnice-$(version)
+src_dir_name = libnice-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+cross_file = $(TARGET_BUILD_DIR)/$(TARGET32)-cross
+
+
+####### Targets
+
+PKG_GROUP = net
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+LIBNICE_32_PKG_NAME = libnice-x32
+LIBNICE_32_PKG_VERSION = 0.1.21
+LIBNICE_32_PKG_ARCH = $(PKGARCH)
+LIBNICE_32_PKG_DISTRO_NAME = $(DISTRO_NAME)
+LIBNICE_32_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+LIBNICE_32_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+LIBNICE_32_PKG_SHORT_DESCRIPTION = Interactive Connectivity library
+LIBNICE_32_PKG_URL = $(BUG_URL)
+LIBNICE_32_PKG_LICENSE = LGPLv2.1
+LIBNICE_32_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(LIBNICE_32_PKG_NAME)-pkg-description
+LIBNICE_32_PKG_DESCRIPTION_FILE_IN = $(LIBNICE_32_PKG_NAME)-pkg-description.in
+LIBNICE_32_PKG_INSTALL_SCRIPT = $(LIBNICE_32_PKG_NAME)-pkg-install.sh
+
+LIBNICE_32_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(LIBNICE_32_PKG_NAME)-package
+
+pkg_basename = $(LIBNICE_32_PKG_NAME)-$(LIBNICE_32_PKG_VERSION)-$(LIBNICE_32_PKG_ARCH)-$(LIBNICE_32_PKG_DISTRO_NAME)-$(LIBNICE_32_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(LIBNICE_32_PKG)
+
+
+cpu_name = x86
+endian = little
+
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --default-library=both
+else
+extra_configure_switches += --default-library=shared
+endif
+
+
+extra_configure_switches += -Dgupnp=disabled
+extra_configure_switches += -Dgstreamer=disabled
+extra_configure_switches += -Dcrypto-library=gnutls
+
+extra_configure_switches += -Dintrospection=disabled
+extra_configure_switches += -Dexamples=disabled
+
+extra_configure_switches += -Dgtk_doc=disabled
+
+
+TARGET_BIN_RPATH = /lib$(MULTILIB_X86_32_SUFFIX):/usr/lib$(MULTILIB_X86_32_SUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_BIN_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @echo "" > $(cross_file)
+ @echo "[build_machine]" >> $(cross_file)
+ @echo "system = '$(shell uname -s | tr 'L' 'l')'" >> $(cross_file)
+ @echo "cpu_family = '$(shell uname -m)'" >> $(cross_file)
+ @echo "cpu = '$(shell uname -m)'" >> $(cross_file)
+ @echo "endian = '$(shell lscpu | grep Endian | tr -s ' ' | cut -f3 -d' ' | tr 'L' 'l')'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[host_machine]" >> $(cross_file)
+ @echo "system = 'linux'" >> $(cross_file)
+ @echo "cpu_family = '$(cpu_name)'" >> $(cross_file)
+ @echo "cpu = '$(cpu_name)'" >> $(cross_file)
+ @echo "endian = '$(endian)'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[target_machine]" >> $(cross_file)
+ @echo "system = 'linux'" >> $(cross_file)
+ @echo "cpu_family = '$(cpu_name)'" >> $(cross_file)
+ @echo "cpu = '$(cpu_name)'" >> $(cross_file)
+ @echo "endian = '$(endian)'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[binaries]" >> $(cross_file)
+ @echo "c = '$(TOOLCHAIN_PATH)/bin/$(TARGET)-gcc'" >> $(cross_file)
+ @echo "cpp = '$(TOOLCHAIN_PATH)/bin/$(TARGET)-g++'" >> $(cross_file)
+ @echo "ar = '$(AR)'" >> $(cross_file)
+ @echo "strip = '$(STRIP)'" >> $(cross_file)
+ @echo "pkgconfig = 'pkg-config'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @meson setup \
+ --prefix=/usr \
+ --libdir=lib$(MULTILIB_X86_32_SUFFIX) \
+ --libexecdir=/usr/libexec/32 \
+ --bindir=/usr/bin/32 \
+ --sbindir=/usr/sbin \
+ --includedir=/usr/include \
+ --datadir=/usr/share \
+ --mandir=/usr/share/man \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --buildtype=release \
+ -Dc_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(CFLAGS)" | tr -s ' '`" \
+ -Dc_link_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) -m32 $(LDFLAGS)" | tr -s ' '`" \
+ -Dcpp_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(CFLAGS)" | tr -s ' '`" \
+ -Dcpp_link_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) -m32 $(LDFLAGS)" | tr -s ' '`" \
+ -Dtests=disabled \
+ $(extra_configure_switches) \
+ --cross-file=$(cross_file) $(SRC_DIR) $(build_dir)
+ @cd $(build_dir) && ninja -v
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(LIBNICE_32_PKG)
+ @cd $(build_dir) && $(env_sysroot) ninja install
+ @rm -rf $(LIBNICE_32_PKG)/usr/include
+ @rm -rf $(LIBNICE_32_PKG)/usr/share
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(LIBNICE_32_PKG))
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_X86_32_SUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" nice.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(LIBNICE_32_PKG); \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(LIBNICE_32_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ @touch $@
+
+$(LIBNICE_32_PKG_DESCRIPTION_FILE): $(LIBNICE_32_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(LIBNICE_32_PKG_DESCRIPTION_FILE) $(LIBNICE_32_PKG_INSTALL_SCRIPT)
+ @cp $(LIBNICE_32_PKG_DESCRIPTION_FILE) $(LIBNICE_32_PKG)/.DESCRIPTION
+ @cp $(LIBNICE_32_PKG_INSTALL_SCRIPT) $(LIBNICE_32_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(LIBNICE_32_PKG)/.REQUIRES
+ @echo "pkgname=$(LIBNICE_32_PKG_NAME)" > $(LIBNICE_32_PKG)/.PKGINFO ; \
+ echo "pkgver=$(LIBNICE_32_PKG_VERSION)" >> $(LIBNICE_32_PKG)/.PKGINFO ; \
+ echo "arch=$(LIBNICE_32_PKG_ARCH)" >> $(LIBNICE_32_PKG)/.PKGINFO ; \
+ echo "distroname=$(LIBNICE_32_PKG_DISTRO_NAME)" >> $(LIBNICE_32_PKG)/.PKGINFO ; \
+ echo "distrover=$(LIBNICE_32_PKG_DISTRO_VERSION)" >> $(LIBNICE_32_PKG)/.PKGINFO ; \
+ echo "group=$(LIBNICE_32_PKG_GROUP)" >> $(LIBNICE_32_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(LIBNICE_32_PKG_SHORT_DESCRIPTION)\"" >> $(LIBNICE_32_PKG)/.PKGINFO ; \
+ echo "url=$(LIBNICE_32_PKG_URL)" >> $(LIBNICE_32_PKG)/.PKGINFO ; \
+ echo "license=$(LIBNICE_32_PKG_LICENSE)" >> $(LIBNICE_32_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(LIBNICE_32_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: radix-1.9/net/libnice/0.1.21-x86_32/PATCHES
===================================================================
Index: radix-1.9/net/libnice/0.1.21-x86_32/libnice-x32-pkg-description.in
===================================================================
--- radix-1.9/net/libnice/0.1.21-x86_32/libnice-x32-pkg-description.in (nonexistent)
+++ radix-1.9/net/libnice/0.1.21-x86_32/libnice-x32-pkg-description.in (revision 61)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+libnice-x32: libnice-x32 @VERSION@ (Interactive Connectivity library)
+libnice-x32:
+libnice-x32: libnice is an implementation of the IETF draft Interactive
+libnice-x32: Connectivity Establishment standard (ICE). ICE is useful for
+libnice-x32: applications that want to establish peer-to-peer UDP data streams.
+libnice-x32: Existing standards that use ICE include the Session Initiation
+libnice-x32: Protocol (SIP) and Jingle, XMPP extension for audio/video calls.
+libnice-x32:
+libnice-x32: Homepage: https://libnice.freedesktop.org
+libnice-x32:
+libnice-x32:
Index: radix-1.9/net/libnice/0.1.21-x86_32/libnice-x32-pkg-install.sh
===================================================================
--- radix-1.9/net/libnice/0.1.21-x86_32/libnice-x32-pkg-install.sh (nonexistent)
+++ radix-1.9/net/libnice/0.1.21-x86_32/libnice-x32-pkg-install.sh (revision 61)
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: radix-1.9/net/libnice/0.1.21-x86_32/libnice-x32-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: radix-1.9/net/libnice/0.1.21-x86_32
===================================================================
--- radix-1.9/net/libnice/0.1.21-x86_32 (nonexistent)
+++ radix-1.9/net/libnice/0.1.21-x86_32 (revision 61)
Property changes on: radix-1.9/net/libnice/0.1.21-x86_32
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/products/X11/Makefile
===================================================================
--- radix-1.9/products/X11/Makefile (revision 60)
+++ radix-1.9/products/X11/Makefile (revision 61)
@@ -743,7 +743,6 @@
####### Desktop networking:
#######
REQUIRES += X11/net/nm-applet/1.30.0
-REQUIRES += X11/net/libnice/0.1.21
#######
####### applications:
Index: radix-1.9/products/base/Makefile
===================================================================
--- radix-1.9/products/base/Makefile (revision 60)
+++ radix-1.9/products/base/Makefile (revision 61)
@@ -1151,6 +1151,14 @@
REQUIRES += libs/libsoup3/3.4.2-x86_32
endif
+REQUIRES += net/libnice/0.1.21
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8_GLIBC) $(TOOLCHAIN_POWER9_GLIBC)),)
+REQUIRES += net/libnice/0.1.21-ppc32
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_X86_64_GLIBC)),)
+REQUIRES += net/libnice/0.1.21-x86_32
+endif
+
REQUIRES += net/nss-pam-ldapd/0.9.11
ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8_GLIBC) $(TOOLCHAIN_POWER9_GLIBC)),)
REQUIRES += net/nss-pam-ldapd/0.9.11-ppc32
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
383 Commits
1 Branch
1 Tag