Index: radix-1.9/X11/net/avahi/0.8/avahi-pkg-install.sh
===================================================================
--- radix-1.9/X11/net/avahi/0.8/avahi-pkg-install.sh (revision 333)
+++ radix-1.9/X11/net/avahi/0.8/avahi-pkg-install.sh (revision 334)
@@ -44,7 +44,7 @@
fi
# Reload messagebus daemon:
- if [ -r proc/sys/kernel/osrelease -a -x etc/rc.d/rc.messagebus ] ; then
+ if [ -r proc/sys/kernel/osrelease -a ! -r /etc/system-installer -a -x etc/rc.d/rc.messagebus ] ; then
chroot . /etc/rc.d/rc.messagebus reload 1> /dev/null 2> /dev/null
fi
}
Index: radix-1.9/app/cryptsetup/2.6.1/Makefile
===================================================================
--- radix-1.9/app/cryptsetup/2.6.1/Makefile (nonexistent)
+++ radix-1.9/app/cryptsetup/2.6.1/Makefile (revision 334)
@@ -0,0 +1,303 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/a/cryptsetup
+
+REQUIRES = app/util-linux/2.38.1
+REQUIRES += app/lvm2/2.03.11
+REQUIRES += net/openssl/1.1.1r
+REQUIRES += libs/argon2/20190702
+REQUIRES += libs/libssh/0.9.5
+REQUIRES += libs/json-c/0.15
+REQUIRES += libs/popt/1.18
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 2.6.1
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/a/cryptsetup/cryptsetup-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/cryptsetup-$(version)
+src_dir_name = cryptsetup-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = app
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+CRYPTSETUP_PKG_NAME = cryptsetup
+CRYPTSETUP_PKG_VERSION = 2.6.1
+CRYPTSETUP_PKG_ARCH = $(PKGARCH)
+CRYPTSETUP_PKG_DISTRO_NAME = $(DISTRO_NAME)
+CRYPTSETUP_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+CRYPTSETUP_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+CRYPTSETUP_PKG_SHORT_DESCRIPTION = utility for setting up encrypted filesystems
+CRYPTSETUP_PKG_URL = $(BUG_URL)
+CRYPTSETUP_PKG_LICENSE = GPLv2
+CRYPTSETUP_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(CRYPTSETUP_PKG_NAME)-pkg-description
+CRYPTSETUP_PKG_DESCRIPTION_FILE_IN = $(CRYPTSETUP_PKG_NAME)-pkg-description.in
+CRYPTSETUP_PKG_INSTALL_SCRIPT = $(CRYPTSETUP_PKG_NAME)-pkg-install.sh
+
+CRYPTSETUP_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(CRYPTSETUP_PKG_NAME)-package
+
+pkg_basename = $(CRYPTSETUP_PKG_NAME)-$(CRYPTSETUP_PKG_VERSION)-$(CRYPTSETUP_PKG_ARCH)-$(CRYPTSETUP_PKG_DISTRO_NAME)-$(CRYPTSETUP_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(CRYPTSETUP_PKG)
+
+extra_configure_switches = --libdir=/usr/lib$(LIBSUFFIX)
+extra_configure_switches += --datadir=/usr/share
+extra_configure_switches += --docdir=/usr/share/doc/$(src_dir_name)
+extra_configure_switches += --mandir=/usr/share/man
+
+extra_configure_switches += --sysconfdir=/etc
+extra_configure_switches += --localstatedir=/var
+
+extra_configure_switches += --enable-cryptsetup-reencrypt
+extra_configure_switches += --enable-libargon2
+extra_configure_switches += --disable-asciidoc
+
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+TARGET_BIN_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_LIB_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @cd $(SRC_DIR) && \
+ $(BUILD_ENVIRONMENT) ./configure \
+ --prefix=/usr \
+ --exec-prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET) \
+ $(extra_configure_switches)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(CRYPTSETUP_PKG)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(env_sysroot)
+ # ======= Add the rc script: =======
+ @mkdir -p $(CRYPTSETUP_PKG)/etc/rc.d
+ @cat $(CURDIR)/rc.d/rc.luks > $(CRYPTSETUP_PKG)/etc/rc.d/rc.luks.new
+ @chmod 644 $(CRYPTSETUP_PKG)/etc/rc.d/rc.luks.new
+ # ======= Move the cryptsetup binary to /sbin: =======
+ @mkdir -p $(CRYPTSETUP_PKG)/sbin
+ @( cd $(CRYPTSETUP_PKG)/usr/sbin ; \
+ mv cryptsetup ../../sbin ; \
+ ln -sf ../../sbin/cryptsetup . ; \
+ )
+ # ======= Install Documentation =======
+ @( cd $(CRYPTSETUP_PKG)/usr/share/man/man8 ; \
+ for file in *.8 ; do \
+ ln=`head -n 1 $$file` ; \
+ if [ "`echo $$ln | grep '^\.so '`" != "" ] ; then \
+ origin=`echo $$ln | cut -f 2 -d ' '` ; \
+ origin=`basename $$origin` ; \
+ rm -f $$file ; \
+ ln -sf $$origin $$file ; \
+ fi ; \
+ done ; \
+ )
+ @if [ -d $(CRYPTSETUP_PKG)/usr/share/man ]; then \
+ ( cd $(CRYPTSETUP_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(CRYPTSETUP_PKG)/usr/doc/$(src_dir_name)
+ @cp -a $(SRC_DIR)/AUTHORS $(SRC_DIR)/COPYING* \
+ $(CRYPTSETUP_PKG)/usr/doc/$(src_dir_name)
+ @mkdir -p $(CRYPTSETUP_PKG)/usr/share/doc/$(src_dir_name)/docs
+ @( cd $(SRC_DIR) ; \
+ cp -a AUTHORS COPYING* FAQ.md README.md \
+ $(CRYPTSETUP_PKG)/usr/share/doc/$(src_dir_name) \
+ )
+ @( cd $(SRC_DIR)/docs ; \
+ cp -a examples *.txt *.pdf v$(version)-ReleaseNotes \
+ $(CRYPTSETUP_PKG)/usr/share/doc/$(src_dir_name)/docs \
+ )
+ # ======= remove target path from target libtool *.la files =======
+ @( cd $(CRYPTSETUP_PKG)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libcryptsetup.la ; \
+ )
+ @( cd $(CRYPTSETUP_PKG)/usr/lib$(LIBSUFFIX)/cryptsetup ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libcryptsetup-token-ssh.la ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(CRYPTSETUP_PKG))
+ # ======= tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcryptsetup.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libcryptsetup.la ; \
+ )
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/cryptsetup ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcryptsetup-token-ssh.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libcryptsetup-token-ssh.la ; \
+ )
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcryptsetup.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(CRYPTSETUP_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(CRYPTSETUP_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target binaries =======
+ @( cd $(CRYPTSETUP_PKG) ; \
+ for file in `find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_BIN_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(CRYPTSETUP_PKG)/usr/lib$(LIBSUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(CRYPTSETUP_PKG_DESCRIPTION_FILE): $(CRYPTSETUP_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(CRYPTSETUP_PKG_DESCRIPTION_FILE) $(CRYPTSETUP_PKG_INSTALL_SCRIPT)
+ @cp $(CRYPTSETUP_PKG_DESCRIPTION_FILE) $(CRYPTSETUP_PKG)/.DESCRIPTION
+ @cp $(CRYPTSETUP_PKG_INSTALL_SCRIPT) $(CRYPTSETUP_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(CRYPTSETUP_PKG)/.REQUIRES
+ @echo "pkgname=$(CRYPTSETUP_PKG_NAME)" > $(CRYPTSETUP_PKG)/.PKGINFO ; \
+ echo "pkgver=$(CRYPTSETUP_PKG_VERSION)" >> $(CRYPTSETUP_PKG)/.PKGINFO ; \
+ echo "arch=$(CRYPTSETUP_PKG_ARCH)" >> $(CRYPTSETUP_PKG)/.PKGINFO ; \
+ echo "distroname=$(CRYPTSETUP_PKG_DISTRO_NAME)" >> $(CRYPTSETUP_PKG)/.PKGINFO ; \
+ echo "distrover=$(CRYPTSETUP_PKG_DISTRO_VERSION)" >> $(CRYPTSETUP_PKG)/.PKGINFO ; \
+ echo "group=$(CRYPTSETUP_PKG_GROUP)" >> $(CRYPTSETUP_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(CRYPTSETUP_PKG_SHORT_DESCRIPTION)\"" >> $(CRYPTSETUP_PKG)/.PKGINFO ; \
+ echo "url=$(CRYPTSETUP_PKG_URL)" >> $(CRYPTSETUP_PKG)/.PKGINFO ; \
+ echo "license=$(CRYPTSETUP_PKG_LICENSE)" >> $(CRYPTSETUP_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(CRYPTSETUP_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: radix-1.9/app/cryptsetup/2.6.1/PATCHES
===================================================================
Index: radix-1.9/app/cryptsetup/2.6.1/cryptsetup-pkg-description.in
===================================================================
--- radix-1.9/app/cryptsetup/2.6.1/cryptsetup-pkg-description.in (nonexistent)
+++ radix-1.9/app/cryptsetup/2.6.1/cryptsetup-pkg-description.in (revision 334)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+cryptsetup: cryptsetup @VERSION@ (utility for setting up encrypted filesystems)
+cryptsetup:
+cryptsetup: LUKS is a standard for cross-platform hard disk encryption.
+cryptsetup: It provides secure management of multiple userpasswords and
+cryptsetup: stores setup information in the partition header. LUKS for dm-crypt
+cryptsetup: is now implemented in cryptsetup replacing the original cryptsetup.
+cryptsetup: It provides all the functionally of the original version plus all
+cryptsetup: LUKS features.
+cryptsetup:
+cryptsetup: Homepage: https://gitlab.com/cryptsetup/cryptsetup
+cryptsetup:
Index: radix-1.9/app/cryptsetup/2.6.1/cryptsetup-pkg-install.sh
===================================================================
--- radix-1.9/app/cryptsetup/2.6.1/cryptsetup-pkg-install.sh (nonexistent)
+++ radix-1.9/app/cryptsetup/2.6.1/cryptsetup-pkg-install.sh (revision 334)
@@ -0,0 +1,64 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+ NEW="$1"
+ OLD="$(dirname $NEW)/$(basename $NEW .new)"
+ if [ -e $OLD ]; then
+ cp -a $OLD ${NEW}.incoming
+ cat $NEW > ${NEW}.incoming
+ mv ${NEW}.incoming $NEW
+ fi
+ install_file $NEW
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ preserve_perms etc/rc.d/rc.luks.new
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: radix-1.9/app/cryptsetup/2.6.1/cryptsetup-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: radix-1.9/app/cryptsetup/2.6.1/rc.d/rc.luks
===================================================================
--- radix-1.9/app/cryptsetup/2.6.1/rc.d/rc.luks (nonexistent)
+++ radix-1.9/app/cryptsetup/2.6.1/rc.d/rc.luks (revision 334)
@@ -0,0 +1,90 @@
+#!/bin/bash
+# Open any volumes created by cryptsetup.
+#
+# Some notes on /etc/crypttab in Slackware:
+# Only LUKS formatted volumes are supported (except for swap)
+# crypttab follows the following format:
+# <luks_name> <device> <password> <options>
+#
+# <luks_name>: This is the name of your LUKS volume.
+# For example: crypt-home
+#
+# <device>: This is the device containing your LUKS volume.
+# For example: /dev/sda2
+#
+# <password>: This is either the volume password in plain text, or the name of
+# a key file. Use 'none' to interactively enter password on boot.
+#
+# <options>: Comma-separated list of options. Note that there must be a
+# password field for any options to be picked up (use a password of 'none' to
+# get a password prompt at boot). The following options are supported:
+#
+# discard -- this will cause --allow-discards to be passed to the cryptsetup
+# program while opening the LUKS volume.
+#
+# ro -- this will cause --readonly to be passed to the cryptsetup program while
+# opening the LUKS volume.
+#
+# swap -- this option cannot be used with other options. The device given will
+# be formatted as a new encrypted volume with a random key on boot, and used as
+# swap.
+#
+# keyscript=<path/to/script> -- get the password from the named script's stdout.
+# The only parameter sent to script is the <password> field, but the script can
+# ignore it.
+#
+
+if [ -f /etc/crypttab -a -x /sbin/cryptsetup ]; then
+ # First, check for device-mapper support.
+ if ! grep -wq device-mapper /proc/devices ; then
+ # If device-mapper exists as a module, try to load it.
+ # Try to load a device-mapper kernel module:
+ /sbin/modprobe -q dm-mod
+ fi
+ # NOTE: we only support LUKS formatted volumes (except for swap)!
+ # The input for this loop comes from after the "done" below, so that we can
+ # use fd3 and keep stdin functional for password entry or in case a keyscript
+ # requires it:
+ while read line <&3; do
+ eval LUKSARRAY=( $line )
+ LUKS="${LUKSARRAY[0]}"
+ DEV="${LUKSARRAY[1]}"
+ PASS="${LUKSARRAY[2]}"
+ OPTS="${LUKSARRAY[3]}"
+ KEYSCRIPT="$(echo $OPTS | sed -n 's/.*keyscript=\([^,]*\).*/\1/p')"
+ LUKSOPTS=""
+ if echo $OPTS | grep -wq ro ; then LUKSOPTS="${LUKSOPTS} --readonly" ; fi
+ if echo $OPTS | grep -wq discard ; then LUKSOPTS="${LUKSOPTS} --allow-discards" ; fi
+ # Skip LUKS volumes that were already unlocked (in the initrd):
+ /sbin/cryptsetup status $LUKS 2>/dev/null | head -n 1 | grep -q "is active" && continue
+ if /sbin/cryptsetup isLuks $DEV 2>/dev/null ; then
+ if [ -z "${LUKSOPTS}" ]; then
+ echo "Unlocking LUKS encrypted volume '${LUKS}' on device '$DEV':"
+ else
+ echo "Unlocking LUKS encrypted volume '${LUKS}' on device '$DEV' with options '${LUKSOPTS}':"
+ fi
+ if [ -x "${KEYSCRIPT}" ]; then
+ # A password was outputted by a script
+ ${KEYSCRIPT} "${PASS}" | /sbin/cryptsetup ${LUKSOPTS} luksOpen $DEV $LUKS
+ echo
+ elif [ -n "${PASS}" -a "${PASS}" != "none" ]; then
+ if [ -f "${PASS}" ]; then
+ # A password was given a key-file filename
+ /sbin/cryptsetup ${LUKSOPTS} --key-file=${PASS} luksOpen $DEV $LUKS
+ else
+ # A password was provided in plain text
+ echo "${PASS}" | /sbin/cryptsetup ${LUKSOPTS} luksOpen $DEV $LUKS
+ fi
+ else
+ # No password was given, or a password of 'none' was given
+ /sbin/cryptsetup ${LUKSOPTS} luksOpen $DEV $LUKS
+ fi
+ elif echo $OPTS | grep -wq swap ; then
+ # If any of the volumes is to be used as encrypted swap,
+ # then encrypt it using a random key and run mkswap:
+ echo "Creating encrypted swap volume '${LUKS}' on device '$DEV':"
+ /sbin/cryptsetup --batch-mode --cipher=aes --key-file=/dev/urandom --key-size=256 create $LUKS $DEV
+ mkswap /dev/mapper/$LUKS
+ fi
+ done 3< <(grep -vE '^(#|$)' /etc/crypttab)
+fi
Index: radix-1.9/app/cryptsetup/2.6.1
===================================================================
--- radix-1.9/app/cryptsetup/2.6.1 (nonexistent)
+++ radix-1.9/app/cryptsetup/2.6.1 (revision 334)
Property changes on: radix-1.9/app/cryptsetup/2.6.1
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/app/ndctl/78/Makefile
===================================================================
--- radix-1.9/app/ndctl/78/Makefile (nonexistent)
+++ radix-1.9/app/ndctl/78/Makefile (revision 334)
@@ -0,0 +1,332 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/a/ndctl
+
+REQUIRES = libs/iniparser/4.1
+REQUIRES += libs/keyutils/1.6.3
+REQUIRES += libs/eudev/3.2.10
+REQUIRES += libs/json-c/0.15
+REQUIRES += app/kmod/30
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 78
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/a/ndctl/ndctl-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/ndctl-$(version)
+src_dir_name = ndctl-$(version)
+doc_dir_name = ndctl-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+build_docs_dir = $(TARGET_BUILD_DIR)/build-docs
+
+cross_file = $(TARGET_BUILD_DIR)/$(TARGET)-cross
+
+
+####### Targets
+
+PKG_GROUP = app
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+NDCTL_PKG_NAME = ndctl
+NDCTL_PKG_VERSION = 78
+NDCTL_PKG_ARCH = $(PKGARCH)
+NDCTL_PKG_DISTRO_NAME = $(DISTRO_NAME)
+NDCTL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+NDCTL_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+NDCTL_PKG_SHORT_DESCRIPTION = non-volatile memory device utility library
+NDCTL_PKG_URL = $(BUG_URL)
+NDCTL_PKG_LICENSE = GPLv2
+NDCTL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(NDCTL_PKG_NAME)-pkg-description
+NDCTL_PKG_DESCRIPTION_FILE_IN = $(NDCTL_PKG_NAME)-pkg-description.in
+NDCTL_PKG_INSTALL_SCRIPT = $(NDCTL_PKG_NAME)-pkg-install.sh
+
+NDCTL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(NDCTL_PKG_NAME)-package
+
+pkg_basename = $(NDCTL_PKG_NAME)-$(NDCTL_PKG_VERSION)-$(NDCTL_PKG_ARCH)-$(NDCTL_PKG_DISTRO_NAME)-$(NDCTL_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(NDCTL_PKG)
+
+
+#
+# https://mesonbuild.com/Reference-tables.html :
+# =============================================
+#
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_A1X_GLIBC) $(TOOLCHAIN_A2X_GLIBC) \
+ $(TOOLCHAIN_H3_GLIBC) $(TOOLCHAIN_RK328X_GLIBC) \
+ $(TOOLCHAIN_S8XX_GLIBC) $(TOOLCHAIN_IMX6_GLIBC) \
+ $(TOOLCHAIN_AM335X_GLIBC) $(TOOLCHAIN_OMAP543X_GLIBC)),)
+cpu_name = arm
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_H5_GLIBC) $(TOOLCHAIN_RK33XX_GLIBC) \
+ $(TOOLCHAIN_RK339X_GLIBC) $(TOOLCHAIN_RK358X_GLIBC) \
+ $(TOOLCHAIN_S9XX_GLIBC) \
+ $(TOOLCHAIN_A311X_GLIBC) $(TOOLCHAIN_M1000_GLIBC)),)
+cpu_name = aarch64
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_JZ47XX_GLIBC) $(TOOLCHAIN_P5600_GLIBC)),)
+cpu_name = mips
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8_GLIBC) $(TOOLCHAIN_POWER9_GLIBC)),)
+cpu_name = ppc64
+endian = big
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8LE_GLIBC) $(TOOLCHAIN_POWER9LE_GLIBC)),)
+cpu_name = ppc64
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_RISCV64_GLIBC)),)
+cpu_name = riscv64
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_I586_GLIBC) $(TOOLCHAIN_I686_GLIBC)),)
+cpu_name = x86
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_X86_64_GLIBC)),)
+cpu_name = x86_64
+endian = little
+endif
+
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --default-library=both
+else
+extra_configure_switches += --default-library=shared
+endif
+
+
+extra_configure_switches += -Dsystemd=disabled
+extra_configure_switches += -Dlibtracefs=disabled
+
+
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_LIB_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @echo "" > $(cross_file)
+ @echo "[build_machine]" >> $(cross_file)
+ @echo "system = '$(shell uname -s | tr 'L' 'l')'" >> $(cross_file)
+ @echo "cpu_family = '$(shell uname -m)'" >> $(cross_file)
+ @echo "cpu = '$(shell uname -m)'" >> $(cross_file)
+ @echo "endian = '$(shell lscpu | grep Endian | tr -s ' ' | cut -f3 -d' ' | tr 'L' 'l')'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[host_machine]" >> $(cross_file)
+ @echo "system = 'linux'" >> $(cross_file)
+ @echo "cpu_family = '$(cpu_name)'" >> $(cross_file)
+ @echo "cpu = '$(cpu_name)'" >> $(cross_file)
+ @echo "endian = '$(endian)'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[target_machine]" >> $(cross_file)
+ @echo "system = 'linux'" >> $(cross_file)
+ @echo "cpu_family = '$(cpu_name)'" >> $(cross_file)
+ @echo "cpu = '$(cpu_name)'" >> $(cross_file)
+ @echo "endian = '$(endian)'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[binaries]" >> $(cross_file)
+ @echo "c = '$(TOOLCHAIN_PATH)/bin/$(TARGET)-gcc'" >> $(cross_file)
+ @echo "cpp = '$(TOOLCHAIN_PATH)/bin/$(TARGET)-g++'" >> $(cross_file)
+ @echo "ar = '$(AR)'" >> $(cross_file)
+ @echo "strip = '$(STRIP)'" >> $(cross_file)
+ @echo "pkgconfig = 'pkg-config'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @meson setup \
+ --prefix=/usr \
+ --libdir=lib$(LIBSUFFIX) \
+ --libexecdir=/usr/libexec \
+ --bindir=/usr/bin \
+ --sbindir=/usr/sbin \
+ --includedir=/usr/include \
+ --datadir=/usr/share \
+ --mandir=/usr/share/man \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --buildtype=release \
+ -Dc_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(CFLAGS)" | tr -s ' '`" \
+ -Dc_link_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(LDFLAGS)" | tr -s ' '`" \
+ -Dcpp_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(CFLAGS)" | tr -s ' '`" \
+ -Dcpp_link_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(LDFLAGS)" | tr -s ' '`" \
+ $(extra_configure_switches) \
+ --cross-file=$(cross_file) $(SRC_DIR) $(build_dir)
+ @cd $(build_dir) && ninja -v
+ @touch $@
+
+$(install_target): $(build_target)
+ @cd $(build_dir) && $(env_sysroot) ninja install
+ @mkdir $(NDCTL_PKG)/lib
+ @mv $(NDCTL_PKG)/etc/modprobe.d $(NDCTL_PKG)/lib
+ @( cd $(NDCTL_PKG)/etc ; \
+ for file in ndctl.conf.d/ndctl.conf ndctl.conf.d/monitor.conf daxctl.conf.d/daxctl.example.conf ; do \
+ mv $${file} $${file}.new ; \
+ done ; \
+ )
+ # ======= Install Documentation =======
+ @if [ -d $(NDCTL_PKG)/usr/share/man ]; then \
+ ( cd $(NDCTL_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(NDCTL_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(SRC_DIR)/COPYING \
+ $(NDCTL_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(NDCTL_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a COPYING README.md \
+ $(NDCTL_PKG)/usr/share/doc/$(doc_dir_name) \
+ )
+ # ======= Install ChangeLog file =======
+ @( cd $(SRC_DIR) ; \
+ if [ -r NEWS ]; then \
+ DOCSDIR=`echo $(NDCTL_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat NEWS | head -n 1000 > $$DOCSDIR/NEWS ; \
+ touch -r NEWS $$DOCSDIR/NEWS ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(NDCTL_PKG))
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcxl.pc libdaxctl.pc libndctl.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(NDCTL_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(NDCTL_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ @touch $@
+
+$(NDCTL_PKG_DESCRIPTION_FILE): $(NDCTL_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(NDCTL_PKG_DESCRIPTION_FILE) $(NDCTL_PKG_INSTALL_SCRIPT)
+ @cp $(NDCTL_PKG_DESCRIPTION_FILE) $(NDCTL_PKG)/.DESCRIPTION
+ @cp $(NDCTL_PKG_INSTALL_SCRIPT) $(NDCTL_PKG)/.INSTALL
+ @chmod a+x $(NDCTL_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(NDCTL_PKG)/.REQUIRES
+ @echo "pkgname=$(NDCTL_PKG_NAME)" > $(NDCTL_PKG)/.PKGINFO ; \
+ echo "pkgver=$(NDCTL_PKG_VERSION)" >> $(NDCTL_PKG)/.PKGINFO ; \
+ echo "arch=$(NDCTL_PKG_ARCH)" >> $(NDCTL_PKG)/.PKGINFO ; \
+ echo "distroname=$(NDCTL_PKG_DISTRO_NAME)" >> $(NDCTL_PKG)/.PKGINFO ; \
+ echo "distrover=$(NDCTL_PKG_DISTRO_VERSION)" >> $(NDCTL_PKG)/.PKGINFO ; \
+ echo "group=$(NDCTL_PKG_GROUP)" >> $(NDCTL_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(NDCTL_PKG_SHORT_DESCRIPTION)\"" >> $(NDCTL_PKG)/.PKGINFO ; \
+ echo "url=$(NDCTL_PKG_URL)" >> $(NDCTL_PKG)/.PKGINFO ; \
+ echo "license=$(NDCTL_PKG_LICENSE)" >> $(NDCTL_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(NDCTL_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: radix-1.9/app/ndctl/78/PATCHES
===================================================================
Index: radix-1.9/app/ndctl/78/ndctl-pkg-description.in
===================================================================
--- radix-1.9/app/ndctl/78/ndctl-pkg-description.in (nonexistent)
+++ radix-1.9/app/ndctl/78/ndctl-pkg-description.in (revision 334)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+ndctl: ndctl @VERSION@ (non-volatile memory device utility library)
+ndctl:
+ndctl: ndctl is a utility library for managing the LIBNVDIMM
+ndctl: (non-volatile memory device) subsystem in the Linux kernel.
+ndctl:
+ndctl:
+ndctl:
+ndctl: Homepage: https://github.com/pmem/ndctl
+ndctl:
+ndctl:
+ndctl:
Index: radix-1.9/app/ndctl/78/ndctl-pkg-install.sh
===================================================================
--- radix-1.9/app/ndctl/78/ndctl-pkg-install.sh (nonexistent)
+++ radix-1.9/app/ndctl/78/ndctl-pkg-install.sh (revision 334)
@@ -0,0 +1,55 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ install_file etc/ndctl.conf.d/ndctl.conf.new
+ install_file etc/ndctl.conf.d/monitor.conf.new
+ install_file etc/daxctl.conf.d/daxctl.example.conf.new
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: radix-1.9/app/ndctl/78/ndctl-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: radix-1.9/app/ndctl/78
===================================================================
--- radix-1.9/app/ndctl/78 (nonexistent)
+++ radix-1.9/app/ndctl/78 (revision 334)
Property changes on: radix-1.9/app/ndctl/78
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/app/parted/3.6/Makefile
===================================================================
--- radix-1.9/app/parted/3.6/Makefile (nonexistent)
+++ radix-1.9/app/parted/3.6/Makefile (revision 334)
@@ -0,0 +1,281 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/GNU/parted
+
+REQUIRES = app/util-linux/2.38.1
+REQUIRES += app/lvm2/2.03.11
+REQUIRES += libs/readline/8.2
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 3.6
+tar_xz_archive = $(SRC_PACKAGE_PATH)/GNU/parted/parted-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/parted-$(version)
+src_dir_name = parted-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = app
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+PARTED_PKG_NAME = parted
+PARTED_PKG_VERSION = 3.6
+PARTED_PKG_ARCH = $(PKGARCH)
+PARTED_PKG_DISTRO_NAME = $(DISTRO_NAME)
+PARTED_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+PARTED_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+PARTED_PKG_SHORT_DESCRIPTION = GNU disk partitioning tool
+PARTED_PKG_URL = $(BUG_URL)
+PARTED_PKG_LICENSE = GPLv2
+PARTED_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(PARTED_PKG_NAME)-pkg-description
+PARTED_PKG_DESCRIPTION_FILE_IN = $(PARTED_PKG_NAME)-pkg-description.in
+PARTED_PKG_INSTALL_SCRIPT = $(PARTED_PKG_NAME)-pkg-install.sh
+
+PARTED_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(PARTED_PKG_NAME)-package
+
+pkg_basename = $(PARTED_PKG_NAME)-$(PARTED_PKG_VERSION)-$(PARTED_PKG_ARCH)-$(PARTED_PKG_DISTRO_NAME)-$(PARTED_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(PARTED_PKG)
+
+
+extra_configure_switches = --libdir=/usr/lib$(LIBSUFFIX)
+extra_configure_switches += --docdir=/usr/share/doc/$(src_dir_name)
+extra_configure_switches += --infodir=/usr/share/info
+extra_configure_switches += --mandir=/usr/share/man
+
+extra_configure_switches += --with-readline
+extra_configure_switches += --enable-device-mapper=yes
+extra_configure_switches += --disable-rpath
+
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+TARGET_BIN_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_LIB_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @cd $(build_dir) && \
+ $(BUILD_ENVIRONMENT) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET) \
+ $(extra_configure_switches)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(PARTED_PKG)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(env_sysroot)
+ # ======= Install Documentation =======
+ @rm -f $(PARTED_PKG)/usr/share/info/dir
+ @gzip -9 $(PARTED_PKG)/usr/share/info/*
+ @if [ -d $(PARTED_PKG)/usr/share/man ]; then \
+ ( cd $(PARTED_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(PARTED_PKG)/usr/doc/$(src_dir_name)
+ @cp -a $(SRC_DIR)/AUTHORS $(SRC_DIR)/COPYING \
+ $(PARTED_PKG)/usr/doc/$(src_dir_name)
+ @mkdir -p $(PARTED_PKG)/usr/share/doc/$(src_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a AUTHORS COPYING INSTALL README THANKS TODO doc/{API,FAT} \
+ $(PARTED_PKG)/usr/share/doc/$(src_dir_name) ; \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r ChangeLog ]; then \
+ DOCSDIR=`echo $(PARTED_PKG)/usr/share/doc/$(src_dir_name)` ; \
+ cat ChangeLog | head -n 1000 > $$DOCSDIR/ChangeLog ; \
+ touch -r ChangeLog $$DOCSDIR/ChangeLog ; \
+ fi \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r NEWS ]; then \
+ DOCSDIR=`echo $(PARTED_PKG)/usr/share/doc/$(src_dir_name)` ; \
+ cat NEWS | head -n 1000 > $$DOCSDIR/NEWS ; \
+ touch -r NEWS $$DOCSDIR/NEWS ; \
+ fi \
+ )
+ # ======= remove toolchain path from target libtool *.la files =======
+ @( cd $(PARTED_PKG)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libparted-fs-resize.la libparted.la ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(PARTED_PKG))
+ # ======= tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libparted-fs-resize.la libparted.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libparted-fs-resize.la libparted.la ; \
+ )
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libparted-fs-resize.pc libparted.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(PARTED_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(PARTED_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target binaries =======
+ @( cd $(PARTED_PKG)/usr ; \
+ for file in `find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_BIN_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(PARTED_PKG)/usr/lib$(LIBSUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(PARTED_PKG_DESCRIPTION_FILE): $(PARTED_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(PARTED_PKG_DESCRIPTION_FILE) $(PARTED_PKG_INSTALL_SCRIPT)
+ @cp $(PARTED_PKG_DESCRIPTION_FILE) $(PARTED_PKG)/.DESCRIPTION
+ @cp $(PARTED_PKG_INSTALL_SCRIPT) $(PARTED_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(PARTED_PKG)/.REQUIRES
+ @echo "pkgname=$(PARTED_PKG_NAME)" > $(PARTED_PKG)/.PKGINFO ; \
+ echo "pkgver=$(PARTED_PKG_VERSION)" >> $(PARTED_PKG)/.PKGINFO ; \
+ echo "arch=$(PARTED_PKG_ARCH)" >> $(PARTED_PKG)/.PKGINFO ; \
+ echo "distroname=$(PARTED_PKG_DISTRO_NAME)" >> $(PARTED_PKG)/.PKGINFO ; \
+ echo "distrover=$(PARTED_PKG_DISTRO_VERSION)" >> $(PARTED_PKG)/.PKGINFO ; \
+ echo "group=$(PARTED_PKG_GROUP)" >> $(PARTED_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(PARTED_PKG_SHORT_DESCRIPTION)\"" >> $(PARTED_PKG)/.PKGINFO ; \
+ echo "url=$(PARTED_PKG_URL)" >> $(PARTED_PKG)/.PKGINFO ; \
+ echo "license=$(PARTED_PKG_LICENSE)" >> $(PARTED_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(PARTED_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: radix-1.9/app/parted/3.6/PATCHES
===================================================================
Index: radix-1.9/app/parted/3.6/parted-pkg-description.in
===================================================================
--- radix-1.9/app/parted/3.6/parted-pkg-description.in (nonexistent)
+++ radix-1.9/app/parted/3.6/parted-pkg-description.in (revision 334)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+parted: parted @VERSION@ (GNU disk partitioning tool)
+parted:
+parted: GNU Parted is a program for creating, destroying, resizing, checking
+parted: and copying partitions, and the filesystems on them. This is useful
+parted: for creating space for new operating systems, reorganizing disk
+parted: usage, copying data between hard disks, and disk imaging.
+parted:
+parted:
+parted:
+parted:
+parted:
Index: radix-1.9/app/parted/3.6/parted-pkg-install.sh
===================================================================
--- radix-1.9/app/parted/3.6/parted-pkg-install.sh (nonexistent)
+++ radix-1.9/app/parted/3.6/parted-pkg-install.sh (revision 334)
@@ -0,0 +1,69 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ #
+ # NOTE:
+ # 'install-info' can work using relative paths and we can make use build machine
+ # utility during installation to the some partition and use target 'install-info'
+ # during installation directly on the running target machine.
+ #
+ if [ -x /usr/bin/install-info ] ; then
+ install-info --info-dir=usr/share/info usr/share/info/parted.info.gz 2>/dev/null
+ elif ! grep "(parted)" usr/share/info/dir 1> /dev/null 2> /dev/null ; then
+ cat << EOF >> usr/share/info/dir
+
+System administration
+* parted: (parted). GNU partitioning software
+EOF
+ fi
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ if [ -x /usr/bin/install-info ] ; then
+ install-info --delete --info-file=usr/share/info/parted.info.gz --dir-file=usr/share/info/dir 2> /dev/null || /bin/true
+ fi
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: radix-1.9/app/parted/3.6/parted-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: radix-1.9/app/parted/3.6
===================================================================
--- radix-1.9/app/parted/3.6 (nonexistent)
+++ radix-1.9/app/parted/3.6 (revision 334)
Property changes on: radix-1.9/app/parted/3.6
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/app/udisks2/2.10.1/Makefile
===================================================================
--- radix-1.9/app/udisks2/2.10.1/Makefile (nonexistent)
+++ radix-1.9/app/udisks2/2.10.1/Makefile (revision 334)
@@ -0,0 +1,307 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/a/udisks
+
+REQUIRES = libs/glib2/2.76.0
+REQUIRES += libs/gobject-introspection/1.76.1
+REQUIRES += dev/vala/0.56.6
+REQUIRES += libs/libatasmart/0.19
+REQUIRES += libs/libblockdev/3.0.4
+REQUIRES += libs/libgudev/236
+REQUIRES += libs/polkit/123
+REQUIRES += app/acl/2.3.1
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 2.10.1
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/a/udisks/udisks-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/udisks-$(version)
+src_dir_name = udisks-$(version)
+doc_dir_name = udisks2-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = app
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+UDISKS_PKG_NAME = udisks2
+UDISKS_PKG_VERSION = 2.10.1
+UDISKS_PKG_ARCH = $(PKGARCH)
+UDISKS_PKG_DISTRO_NAME = $(DISTRO_NAME)
+UDISKS_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+UDISKS_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+UDISKS_PKG_SHORT_DESCRIPTION = storage device daemon v2
+UDISKS_PKG_URL = $(BUG_URL)
+UDISKS_PKG_LICENSE = GPLv2
+UDISKS_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(UDISKS_PKG_NAME)-pkg-description
+UDISKS_PKG_DESCRIPTION_FILE_IN = $(UDISKS_PKG_NAME)-pkg-description.in
+UDISKS_PKG_INSTALL_SCRIPT = $(UDISKS_PKG_NAME)-pkg-install.sh
+
+UDISKS_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(UDISKS_PKG_NAME)-package
+
+pkg_basename = $(UDISKS_PKG_NAME)-$(UDISKS_PKG_VERSION)-$(UDISKS_PKG_ARCH)-$(UDISKS_PKG_DISTRO_NAME)-$(UDISKS_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(UDISKS_PKG)
+
+
+extra_configure_switches = --libdir=/usr/lib$(LIBSUFFIX)
+extra_configure_switches += --docdir=/usr/share/doc/$(doc_dir_name)
+extra_configure_switches += --mandir=/usr/share/man
+
+extra_configure_switches += --sysconfdir=/etc
+extra_configure_switches += --localstatedir=/var
+
+extra_configure_switches += --enable-introspection=yes
+
+extra_configure_switches += --enable-lvm2
+extra_configure_switches += --enable-btrfs
+extra_configure_switches += --enable-bcache
+
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+PYTHON3_VERSION = 3.10
+
+python_environment = PYTHON=$(PYTHON3)
+python_environment += PYTHONPATH='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/gobject-introspection:$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/python$(PYTHON3_VERSION)/lib-dynload'
+
+
+CFLAGS += -Wno-deprecated-declarations -Wno-maybe-uninitialized -Wno-pointer-sign
+CFLAGS += -w -Wno-unused-but-set-variable -Wno-unused-result -Wno-strict-aliasing
+
+TARGET_BIN_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_BIN_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @cd $(SRC_DIR) && \
+ $(BUILD_ENVIRONMENT) $(python_environment) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET) \
+ $(extra_configure_switches)
+ @( cd $(SRC_DIR) ; \
+ env -i $(MAKE) $(python_environment) VAPIGEN=/usr/bin/vapigen ; \
+ )
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(UDISKS_PKG)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) install $(env_sysroot)
+ @mv $(UDISKS_PKG)/etc/udisks2/udisks2.conf{,.new}
+ # ======= Install interface declaration: =======
+ @mkdir -p $(UDISKS_PKG)/usr/share/dbus-1/interfaces/
+ @cat $(SRC_DIR)/data/org.freedesktop.UDisks2.xml \
+ > $(UDISKS_PKG)/usr/share/dbus-1/interfaces/org.freedesktop.UDisks2.xml
+ # ======= Add default policy files for udisks2 events: =======
+ @mkdir -p $(UDISKS_PKG)/usr/share/polkit-1/rules.d/
+ @cat $(CURDIR)/rules.d/20-plugdev-group-mount-override.rules \
+ > $(UDISKS_PKG)/usr/share/polkit-1/rules.d/20-plugdev-group-mount-override.rules
+ # ======= Install Documentation =======
+ @if [ -d $(UDISKS_PKG)/usr/share/man ]; then \
+ ( cd $(UDISKS_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(UDISKS_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(SRC_DIR)/AUTHORS $(SRC_DIR)/COPYING \
+ $(UDISKS_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(UDISKS_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a AUTHORS COPYING HACKING README.md \
+ $(UDISKS_PKG)/usr/share/doc/$(doc_dir_name) \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r NEWS ]; then \
+ DOCSDIR=`echo $(UDISKS_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat NEWS | head -n 1000 > $$DOCSDIR/NEWS ; \
+ touch -r NEWS $$DOCSDIR/NEWS ; \
+ fi \
+ )
+ # ======= remove toolchain path from target libtool *.la files =======
+ @( cd $(UDISKS_PKG)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libudisks2.la ; \
+ )
+ @( cd $(UDISKS_PKG)/usr/lib$(LIBSUFFIX)/udisks2/modules ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libudisks2_btrfs.la libudisks2_lvm2.la ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(UDISKS_PKG))
+ # ======= tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libudisks2.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libudisks2.la ; \
+ )
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/udisks2/modules ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libudisks2_btrfs.la libudisks2_lvm2.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libudisks2_btrfs.la libudisks2_lvm2.la ; \
+ )
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,^prefix=/usr,prefix=$(TARGET_DEST_DIR)/usr,g" udisks2-btrfs.pc udisks2-lvm2.pc udisks2.pc ; \
+ sed -i "s,^libdir=/usr,libdir=$(TARGET_DEST_DIR)/usr,g" udisks2-btrfs.pc udisks2-lvm2.pc udisks2.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(UDISKS_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(UDISKS_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target binaries =======
+ @( cd $(UDISKS_PKG)/usr ; \
+ for file in `find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_BIN_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(UDISKS_PKG)/usr/lib$(LIBSUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(UDISKS_PKG_DESCRIPTION_FILE): $(UDISKS_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(UDISKS_PKG_DESCRIPTION_FILE) $(UDISKS_PKG_INSTALL_SCRIPT)
+ @cp $(UDISKS_PKG_DESCRIPTION_FILE) $(UDISKS_PKG)/.DESCRIPTION
+ @cp $(UDISKS_PKG_INSTALL_SCRIPT) $(UDISKS_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(UDISKS_PKG)/.REQUIRES
+ @echo "pkgname=$(UDISKS_PKG_NAME)" > $(UDISKS_PKG)/.PKGINFO ; \
+ echo "pkgver=$(UDISKS_PKG_VERSION)" >> $(UDISKS_PKG)/.PKGINFO ; \
+ echo "arch=$(UDISKS_PKG_ARCH)" >> $(UDISKS_PKG)/.PKGINFO ; \
+ echo "distroname=$(UDISKS_PKG_DISTRO_NAME)" >> $(UDISKS_PKG)/.PKGINFO ; \
+ echo "distrover=$(UDISKS_PKG_DISTRO_VERSION)" >> $(UDISKS_PKG)/.PKGINFO ; \
+ echo "group=$(UDISKS_PKG_GROUP)" >> $(UDISKS_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(UDISKS_PKG_SHORT_DESCRIPTION)\"" >> $(UDISKS_PKG)/.PKGINFO ; \
+ echo "url=$(UDISKS_PKG_URL)" >> $(UDISKS_PKG)/.PKGINFO ; \
+ echo "license=$(UDISKS_PKG_LICENSE)" >> $(UDISKS_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(UDISKS_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: radix-1.9/app/udisks2/2.10.1/PATCHES
===================================================================
Index: radix-1.9/app/udisks2/2.10.1/rules.d/20-plugdev-group-mount-override.rules
===================================================================
--- radix-1.9/app/udisks2/2.10.1/rules.d/20-plugdev-group-mount-override.rules (nonexistent)
+++ radix-1.9/app/udisks2/2.10.1/rules.d/20-plugdev-group-mount-override.rules (revision 334)
@@ -0,0 +1,16 @@
+/* http://udisks.freedesktop.org/docs/latest/udisks-polkit-actions.html */
+
+polkit.addRule(function(action, subject) {
+ if (action.id == "org.freedesktop.udisks2.filesystem-mount" &&
+ subject.isInGroup("plugdev")) {
+ return polkit.Result.YES;
+ }
+});
+
+polkit.addRule(function(action, subject) {
+ if (action.id == "org.freedesktop.udisks2.eject-media" &&
+ subject.isInGroup("plugdev")) {
+ return polkit.Result.YES;
+ }
+});
+
Index: radix-1.9/app/udisks2/2.10.1/udisks2-pkg-description.in
===================================================================
--- radix-1.9/app/udisks2/2.10.1/udisks2-pkg-description.in (nonexistent)
+++ radix-1.9/app/udisks2/2.10.1/udisks2-pkg-description.in (revision 334)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+udisks2: udisks2 @VERSION@ (storage device daemon v2)
+udisks2:
+udisks2: The udisks project provides a storage daemon that implements D-Bus
+udisks2: interfaces that can be used to query and manipulate storage devices.
+udisks2:
+udisks2: It also includes a command-line tool, udisks(1), that can be used
+udisks2: to query and control the daemon.
+udisks2:
+udisks2: Homepage: https://www.freedesktop.org/wiki/Software/udisks
+udisks2:
+udisks2:
Index: radix-1.9/app/udisks2/2.10.1/udisks2-pkg-install.sh
===================================================================
--- radix-1.9/app/udisks2/2.10.1/udisks2-pkg-install.sh (nonexistent)
+++ radix-1.9/app/udisks2/2.10.1/udisks2-pkg-install.sh (revision 334)
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ install_file etc/udisks2/udisks2.conf.new
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: radix-1.9/app/udisks2/2.10.1/udisks2-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: radix-1.9/app/udisks2/2.10.1
===================================================================
--- radix-1.9/app/udisks2/2.10.1 (nonexistent)
+++ radix-1.9/app/udisks2/2.10.1 (revision 334)
Property changes on: radix-1.9/app/udisks2/2.10.1
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/libs/iniparser/4.1/Makefile
===================================================================
--- radix-1.9/libs/iniparser/4.1/Makefile (nonexistent)
+++ radix-1.9/libs/iniparser/4.1/Makefile (revision 334)
@@ -0,0 +1,220 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/iniparser
+
+ifeq ($(__USE_BUILT_GCC_LIBS__),yes)
+REQUIRES = dev/gcc/12.2.0
+else
+REQUIRES = libs/glibc/2.37
+endif
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 4.1
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/iniparser/iniparser-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/iniparser-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = libs
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+INIPARSER_PKG_NAME = iniparser
+INIPARSER_PKG_VERSION = 4.1
+INIPARSER_PKG_ARCH = $(PKGARCH)
+INIPARSER_PKG_DISTRO_NAME = $(DISTRO_NAME)
+INIPARSER_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+INIPARSER_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+INIPARSER_PKG_SHORT_DESCRIPTION = ini file parsing library
+INIPARSER_PKG_URL = $(BUG_URL)
+INIPARSER_PKG_LICENSE = GPLv2
+INIPARSER_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(INIPARSER_PKG_NAME)-pkg-description
+INIPARSER_PKG_DESCRIPTION_FILE_IN = $(INIPARSER_PKG_NAME)-pkg-description.in
+INIPARSER_PKG_INSTALL_SCRIPT = $(INIPARSER_PKG_NAME)-pkg-install.sh
+
+INIPARSER_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(INIPARSER_PKG_NAME)-package
+
+pkg_basename = $(INIPARSER_PKG_NAME)-$(INIPARSER_PKG_VERSION)-$(INIPARSER_PKG_ARCH)-$(INIPARSER_PKG_DISTRO_NAME)-$(INIPARSER_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(INIPARSER_PKG)
+
+
+CFLAGS += -Wno-format-overflow
+
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_LIB_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @( cd $(SRC_DIR) ; \
+ sed -i 's,^LDFLAGS,#LDFLAGS,' Makefile ; \
+ )
+ @touch $@
+
+$(build_target): $(src_done)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE)
+ @touch $@
+
+$(install_target): $(build_target)
+ # ======= Install: =======
+ @mkdir -p $(INIPARSER_PKG)/usr/include
+ @cp -a $(SRC_DIR)/src/iniparser.h $(SRC_DIR)/src/dictionary.h $(INIPARSER_PKG)/usr/include
+ @mkdir -p $(INIPARSER_PKG)/usr/lib$(LIBSUFFIX)
+ @cp -a $(SRC_DIR)/libiniparser.so.1 $(INIPARSER_PKG)/usr/lib$(LIBSUFFIX)
+ @( cd $(INIPARSER_PKG)/usr/lib$(LIBSUFFIX) ; \
+ ln -sf libiniparser.so.1 libiniparser.so ; \
+ )
+ # ======= Install Documentation =======
+ @if [ -d $(INIPARSER_PKG)/usr/share/man ]; then \
+ ( cd $(INIPARSER_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(INIPARSER_PKG)/usr/doc/iniparser-$(version)
+ @( cd $(SRC_DIR) ; \
+ cp -a AUTHORS LICENSE \
+ $(INIPARSER_PKG)/usr/doc/iniparser-$(version) ; \
+ )
+ @mkdir -p $(INIPARSER_PKG)/usr/share/doc/iniparser-$(version)
+ @( cd $(SRC_DIR) ; \
+ cp -a AUTHORS FAQ-en.md LICENSE INSTALL README.md example html \
+ $(INIPARSER_PKG)/usr/share/doc/iniparser-$(version) ; \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r NEWS ]; then \
+ DOCSDIR=`echo $(INIPARSER_PKG)/usr/share/doc/iniparser-$(version)` ; \
+ cat NEWS | head -n 1000 > $$DOCSDIR/NEWS ; \
+ touch -r NEWS $$DOCSDIR/NEWS ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(INIPARSER_PKG))
+ # ======= Strip binaries =======
+ @( cd $(INIPARSER_PKG) ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ @touch $@
+
+$(INIPARSER_PKG_DESCRIPTION_FILE): $(INIPARSER_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(INIPARSER_PKG_DESCRIPTION_FILE) $(INIPARSER_PKG_INSTALL_SCRIPT)
+ @cp $(INIPARSER_PKG_DESCRIPTION_FILE) $(INIPARSER_PKG)/.DESCRIPTION
+ @cp $(INIPARSER_PKG_INSTALL_SCRIPT) $(INIPARSER_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(INIPARSER_PKG)/.REQUIRES
+ @echo "pkgname=$(INIPARSER_PKG_NAME)" > $(INIPARSER_PKG)/.PKGINFO ; \
+ echo "pkgver=$(INIPARSER_PKG_VERSION)" >> $(INIPARSER_PKG)/.PKGINFO ; \
+ echo "arch=$(INIPARSER_PKG_ARCH)" >> $(INIPARSER_PKG)/.PKGINFO ; \
+ echo "distroname=$(INIPARSER_PKG_DISTRO_NAME)" >> $(INIPARSER_PKG)/.PKGINFO ; \
+ echo "distrover=$(INIPARSER_PKG_DISTRO_VERSION)" >> $(INIPARSER_PKG)/.PKGINFO ; \
+ echo "group=$(INIPARSER_PKG_GROUP)" >> $(INIPARSER_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(INIPARSER_PKG_SHORT_DESCRIPTION)\"" >> $(INIPARSER_PKG)/.PKGINFO ; \
+ echo "url=$(INIPARSER_PKG_URL)" >> $(INIPARSER_PKG)/.PKGINFO ; \
+ echo "license=$(INIPARSER_PKG_LICENSE)" >> $(INIPARSER_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(INIPARSER_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: radix-1.9/libs/iniparser/4.1/PATCHES
===================================================================
Index: radix-1.9/libs/iniparser/4.1/iniparser-pkg-description.in
===================================================================
--- radix-1.9/libs/iniparser/4.1/iniparser-pkg-description.in (nonexistent)
+++ radix-1.9/libs/iniparser/4.1/iniparser-pkg-description.in (revision 334)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+iniparser: iniparser @VERSION@ (ini file parsing library)
+iniparser:
+iniparser: iniParser is a simple C library offering ini file parsing services.
+iniparser: The library is pretty small (less than 1500 lines of C) and robust,
+iniparser: and does not depend on any other external library to compile. It is
+iniparser: written in ANSI C and should compile easily on most platforms.
+iniparser:
+iniparser: Homepage: https://github.com/ndevilla/iniparser
+iniparser:
+iniparser:
+iniparser:
Index: radix-1.9/libs/iniparser/4.1/iniparser-pkg-install.sh
===================================================================
--- radix-1.9/libs/iniparser/4.1/iniparser-pkg-install.sh (nonexistent)
+++ radix-1.9/libs/iniparser/4.1/iniparser-pkg-install.sh (revision 334)
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: radix-1.9/libs/iniparser/4.1/iniparser-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: radix-1.9/libs/iniparser/4.1
===================================================================
--- radix-1.9/libs/iniparser/4.1 (nonexistent)
+++ radix-1.9/libs/iniparser/4.1 (revision 334)
Property changes on: radix-1.9/libs/iniparser/4.1
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/libs/libatasmart/0.19/Makefile
===================================================================
--- radix-1.9/libs/libatasmart/0.19/Makefile (nonexistent)
+++ radix-1.9/libs/libatasmart/0.19/Makefile (revision 334)
@@ -0,0 +1,272 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/libatasmart
+
+REQUIRES = libs/eudev/3.2.10
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 0.19
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/libatasmart/libatasmart-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/libatasmart-$(version)
+src_dir_name = libatasmart-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = libs
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+ATASMART_PKG_NAME = libatasmart
+ATASMART_PKG_VERSION = 0.19
+ATASMART_PKG_ARCH = $(PKGARCH)
+ATASMART_PKG_DISTRO_NAME = $(DISTRO_NAME)
+ATASMART_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+ATASMART_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+ATASMART_PKG_SHORT_DESCRIPTION = ATA S.M.A.R.T. library
+ATASMART_PKG_URL = $(BUG_URL)
+ATASMART_PKG_LICENSE = LGPLv2.1
+ATASMART_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(ATASMART_PKG_NAME)-pkg-description
+ATASMART_PKG_DESCRIPTION_FILE_IN = $(ATASMART_PKG_NAME)-pkg-description.in
+ATASMART_PKG_INSTALL_SCRIPT = $(ATASMART_PKG_NAME)-pkg-install.sh
+
+ATASMART_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(ATASMART_PKG_NAME)-package
+
+pkg_basename = $(ATASMART_PKG_NAME)-$(ATASMART_PKG_VERSION)-$(ATASMART_PKG_ARCH)-$(ATASMART_PKG_DISTRO_NAME)-$(ATASMART_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(ATASMART_PKG)
+
+
+extra_configure_switches = --libdir=/usr/lib$(LIBSUFFIX)
+extra_configure_switches += --docdir=/usr/share/doc/$(src_dir_name)
+extra_configure_switches += --infodir=/usr/share/info
+extra_configure_switches += --mandir=/usr/share/man
+
+extra_configure_switches += --sysconfdir=/etc
+extra_configure_switches += --localstatedir=/var
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+extra_environment = CC_FOR_BUILD=gcc
+extra_environment += BUILD_CFLAGS=-I/usr/include
+extra_environment += BUILD_LDFLAGS=-L/usr/lib$(BUILD_MULTILIB_SUFFIX)
+
+
+TARGET_BIN_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_BIN_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @cp -a $(CONFIG_GUESS) $(CONFIG_SUB) $(SRC_DIR)/build-aux
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @cd $(build_dir) && \
+ $(BUILD_ENVIRONMENT) $(extra_environment) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET) \
+ $(extra_configure_switches)
+ @( cd $(build_dir)/strpool ; \
+ echo "`pwd`" ; \
+ sed -i 's,^\(CFLAGS =\).*,\1 -I/usr/include,' Makefile ; \
+ sed -i 's,^\(CPP =\).*,\1 gcc -E,' Makefile ; \
+ )
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(ATASMART_PKG)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(env_sysroot)
+ # ======= Install Documentation =======
+ @if [ -d $(ATASMART_PKG)/usr/share/man ]; then \
+ ( cd $(ATASMART_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(ATASMART_PKG)/usr/doc/$(src_dir_name)
+ @cp -a $(SRC_DIR)/LGPL \
+ $(ATASMART_PKG)/usr/doc/$(src_dir_name)
+ @mkdir -p $(ATASMART_PKG)/usr/share/doc/$(src_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a LGPL README \
+ $(ATASMART_PKG)/usr/share/doc/$(src_dir_name) ; \
+ )
+ # ====== remove toolchain path from target libtool *.la files ======
+ @( cd $(ATASMART_PKG)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libatasmart.la ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(ATASMART_PKG))
+ # ======= tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libatasmart.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libatasmart.la ; \
+ )
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libatasmart.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(ATASMART_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(ATASMART_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target binaries =======
+ @( cd $(ATASMART_PKG)/usr ; \
+ for file in `find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_BIN_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(ATASMART_PKG)/usr/lib$(LIBSUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(ATASMART_PKG_DESCRIPTION_FILE): $(ATASMART_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(ATASMART_PKG_DESCRIPTION_FILE) $(ATASMART_PKG_INSTALL_SCRIPT)
+ @cp $(ATASMART_PKG_DESCRIPTION_FILE) $(ATASMART_PKG)/.DESCRIPTION
+ @cp $(ATASMART_PKG_INSTALL_SCRIPT) $(ATASMART_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(ATASMART_PKG)/.REQUIRES
+ @echo "pkgname=$(ATASMART_PKG_NAME)" > $(ATASMART_PKG)/.PKGINFO ; \
+ echo "pkgver=$(ATASMART_PKG_VERSION)" >> $(ATASMART_PKG)/.PKGINFO ; \
+ echo "arch=$(ATASMART_PKG_ARCH)" >> $(ATASMART_PKG)/.PKGINFO ; \
+ echo "distroname=$(ATASMART_PKG_DISTRO_NAME)" >> $(ATASMART_PKG)/.PKGINFO ; \
+ echo "distrover=$(ATASMART_PKG_DISTRO_VERSION)" >> $(ATASMART_PKG)/.PKGINFO ; \
+ echo "group=$(ATASMART_PKG_GROUP)" >> $(ATASMART_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(ATASMART_PKG_SHORT_DESCRIPTION)\"" >> $(ATASMART_PKG)/.PKGINFO ; \
+ echo "url=$(ATASMART_PKG_URL)" >> $(ATASMART_PKG)/.PKGINFO ; \
+ echo "license=$(ATASMART_PKG_LICENSE)" >> $(ATASMART_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(ATASMART_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: radix-1.9/libs/libatasmart/0.19/PATCHES
===================================================================
Index: radix-1.9/libs/libatasmart/0.19/libatasmart-pkg-description.in
===================================================================
--- radix-1.9/libs/libatasmart/0.19/libatasmart-pkg-description.in (nonexistent)
+++ radix-1.9/libs/libatasmart/0.19/libatasmart-pkg-description.in (revision 334)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+libatasmart: libatasmart @VERSION@ (ATA S.M.A.R.T. library)
+libatasmart:
+libatasmart: libatasmart is a lean, small and clean implementation of an ATA
+libatasmart: S.M.A.R.T. ((Self-Monitoring, Analysis and Reporting Technology)
+libatasmart: reading and parsing library. S.M.A.R.T. is a system used by hard
+libatasmart: drives to monitor factors that may impact drive reliability in
+libatasmart: the hope of predicting a drive failure before it occurs.
+libatasmart:
+libatasmart: Homepage: http://0pointer.de/blog/projects/being-smart.html
+libatasmart:
+libatasmart:
Index: radix-1.9/libs/libatasmart/0.19/libatasmart-pkg-install.sh
===================================================================
--- radix-1.9/libs/libatasmart/0.19/libatasmart-pkg-install.sh (nonexistent)
+++ radix-1.9/libs/libatasmart/0.19/libatasmart-pkg-install.sh (revision 334)
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: radix-1.9/libs/libatasmart/0.19/libatasmart-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: radix-1.9/libs/libatasmart/0.19
===================================================================
--- radix-1.9/libs/libatasmart/0.19 (nonexistent)
+++ radix-1.9/libs/libatasmart/0.19 (revision 334)
Property changes on: radix-1.9/libs/libatasmart/0.19
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/libs/libblockdev/3.0.4/Makefile
===================================================================
--- radix-1.9/libs/libblockdev/3.0.4/Makefile (nonexistent)
+++ radix-1.9/libs/libblockdev/3.0.4/Makefile (revision 334)
@@ -0,0 +1,335 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/libblockdev
+
+REQUIRES = libs/glib2/2.76.0
+REQUIRES += libs/gobject-introspection/1.76.1
+REQUIRES += dev/vala/0.56.6
+REQUIRES += libs/libbytesize/2.10
+REQUIRES += libs/volume_key/0.3.12
+REQUIRES += libs/keyutils/1.6.3
+REQUIRES += libs/libnvme/1.7.1
+REQUIRES += app/parted/3.6
+REQUIRES += app/ndctl/78
+REQUIRES += app/mdadm/4.1
+REQUIRES += app/cryptsetup/2.6.1
+REQUIRES += app/e2fsprogs/1.46.2
+REQUIRES += app/btrfs-progs/5.15.1
+REQUIRES += app/xfsprogs/5.10.0
+REQUIRES += app/dosfstools/4.2
+REQUIRES += app/lvm2/2.03.11
+REQUIRES += app/kmod/30
+REQUIRES += net/nss/3.93
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 3.0.4
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/libblockdev/libblockdev-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/libblockdev-$(version)
+src_dir_name = libblockdev-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = libs
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+BLOCKDEV_PKG_NAME = libblockdev
+BLOCKDEV_PKG_VERSION = 3.0.4
+BLOCKDEV_PKG_ARCH = $(PKGARCH)
+BLOCKDEV_PKG_DISTRO_NAME = $(DISTRO_NAME)
+BLOCKDEV_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+BLOCKDEV_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+BLOCKDEV_PKG_SHORT_DESCRIPTION = library for manipulating block devices
+BLOCKDEV_PKG_URL = $(BUG_URL)
+BLOCKDEV_PKG_LICENSE = LGPLv2.1
+BLOCKDEV_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(BLOCKDEV_PKG_NAME)-pkg-description
+BLOCKDEV_PKG_DESCRIPTION_FILE_IN = $(BLOCKDEV_PKG_NAME)-pkg-description.in
+BLOCKDEV_PKG_INSTALL_SCRIPT = $(BLOCKDEV_PKG_NAME)-pkg-install.sh
+
+BLOCKDEV_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(BLOCKDEV_PKG_NAME)-package
+
+pkg_basename = $(BLOCKDEV_PKG_NAME)-$(BLOCKDEV_PKG_VERSION)-$(BLOCKDEV_PKG_ARCH)-$(BLOCKDEV_PKG_DISTRO_NAME)-$(BLOCKDEV_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(BLOCKDEV_PKG)
+
+
+extra_configure_switches = --libdir=/usr/lib$(LIBSUFFIX)
+extra_configure_switches += --docdir=/usr/share/doc/$(src_dir_name)
+extra_configure_switches += --mandir=/usr/share/man
+
+extra_configure_switches += --sysconfdir=/etc
+extra_configure_switches += --localstatedir=/var
+
+extra_configure_switches += --enable-introspection=yes
+
+extra_configure_switches += --with-python3=yes
+extra_configure_switches += --enable-debug=no
+extra_configure_switches += --enable-tests=no
+
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+PYTHON3_VERSION = 3.10
+
+python_environment = PYTHON=$(PYTHON3)
+python_environment += PYTHONPATH='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/gobject-introspection:$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/python$(PYTHON3_VERSION)/lib-dynload'
+
+
+CFLAGS += -Wno-deprecated-declarations -Wno-maybe-uninitialized -Wno-pointer-sign
+CFLAGS += -w -Wno-unused-but-set-variable -Wno-unused-result -Wno-strict-aliasing
+
+TARGET_BIN_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_BIN_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @cd $(SRC_DIR) && \
+ $(BUILD_ENVIRONMENT) $(python_environment) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET) \
+ $(extra_configure_switches)
+ @( cd $(SRC_DIR) ; \
+ env -i $(MAKE) $(python_environment) VAPIGEN=/usr/bin/vapigen GIR_EXTRA_LIBS_PATH=../plugins/.libs:../utils/.libs ; \
+ )
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(BLOCKDEV_PKG)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) install $(env_sysroot)
+ @mv $(BLOCKDEV_PKG)/etc/libblockdev/3/conf.d/00-default.cfg{,.new}
+ @mv $(BLOCKDEV_PKG)/etc/libblockdev/3/conf.d/10-lvm-dbus.cfg{,.new}
+ # ======= Install Documentation =======
+ @if [ -d $(BLOCKDEV_PKG)/usr/share/man ]; then \
+ ( cd $(BLOCKDEV_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(BLOCKDEV_PKG)/usr/doc/$(src_dir_name)
+ @cp -a $(SRC_DIR)/LICENSE \
+ $(BLOCKDEV_PKG)/usr/doc/$(src_dir_name)
+ @mkdir -p $(BLOCKDEV_PKG)/usr/share/doc/$(src_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a LICENSE README* \
+ $(BLOCKDEV_PKG)/usr/share/doc/$(src_dir_name) \
+ )
+ @ln -sf ../../gtk-doc/html/libblockdev $(BLOCKDEV_PKG)/usr/share/doc/$(src_dir_name)/html
+ @( cd $(SRC_DIR) ; \
+ if [ -r NEWS.rst ]; then \
+ DOCSDIR=`echo $(BLOCKDEV_PKG)/usr/share/doc/$(src_dir_name)` ; \
+ cat NEWS.rst | head -n 1000 > $$DOCSDIR/NEWS.rst ; \
+ touch -r NEWS.rst $$DOCSDIR/NEWS.rst ; \
+ fi \
+ )
+ # ======= remove toolchain path from target libtool *.la files =======
+ @( cd $(BLOCKDEV_PKG)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,-L./../utils/ ,,g" libbd_btrfs.la libbd_crypto.la \
+ libbd_fs.la libbd_loop.la \
+ libbd_lvm-dbus.la libbd_lvm.la \
+ libbd_mdraid.la libbd_mpath.la \
+ libbd_nvdimm.la libbd_nvme.la \
+ libbd_part.la libbd_swap.la \
+ libbd_utils.la libblockdev.la ; \
+ sed -i "s,-L./../../utils/ ,,g" libbd_btrfs.la libbd_crypto.la \
+ libbd_fs.la libbd_loop.la \
+ libbd_lvm-dbus.la libbd_lvm.la \
+ libbd_mdraid.la libbd_mpath.la \
+ libbd_nvdimm.la libbd_nvme.la \
+ libbd_part.la libbd_swap.la \
+ libbd_utils.la libblockdev.la ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libbd_btrfs.la libbd_crypto.la \
+ libbd_fs.la libbd_loop.la \
+ libbd_lvm-dbus.la libbd_lvm.la \
+ libbd_mdraid.la libbd_mpath.la \
+ libbd_nvdimm.la libbd_nvme.la \
+ libbd_part.la libbd_swap.la \
+ libbd_utils.la libblockdev.la ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(BLOCKDEV_PKG))
+ # ======= tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libbd_btrfs.la libbd_crypto.la \
+ libbd_fs.la libbd_loop.la \
+ libbd_lvm-dbus.la libbd_lvm.la \
+ libbd_mdraid.la libbd_mpath.la \
+ libbd_nvdimm.la libbd_nvme.la \
+ libbd_part.la libbd_swap.la \
+ libbd_utils.la libblockdev.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libbd_btrfs.la libbd_crypto.la \
+ libbd_fs.la libbd_loop.la \
+ libbd_lvm-dbus.la libbd_lvm.la \
+ libbd_mdraid.la libbd_mpath.la \
+ libbd_nvdimm.la libbd_nvme.la \
+ libbd_part.la libbd_swap.la \
+ libbd_utils.la libblockdev.la ; \
+ )
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,^prefix=/usr,prefix=$(TARGET_DEST_DIR)/usr,g" blockdev-utils.pc blockdev.pc ; \
+ sed -i "s,^libdir=/usr,libdir=$(TARGET_DEST_DIR)/usr,g" blockdev-utils.pc blockdev.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(BLOCKDEV_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(BLOCKDEV_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target binaries =======
+ @( cd $(BLOCKDEV_PKG)/usr/bin ; \
+ for file in `find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_BIN_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(BLOCKDEV_PKG)/usr/lib$(LIBSUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(BLOCKDEV_PKG_DESCRIPTION_FILE): $(BLOCKDEV_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(BLOCKDEV_PKG_DESCRIPTION_FILE) $(BLOCKDEV_PKG_INSTALL_SCRIPT)
+ @cp $(BLOCKDEV_PKG_DESCRIPTION_FILE) $(BLOCKDEV_PKG)/.DESCRIPTION
+ @cp $(BLOCKDEV_PKG_INSTALL_SCRIPT) $(BLOCKDEV_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(BLOCKDEV_PKG)/.REQUIRES
+ @echo "pkgname=$(BLOCKDEV_PKG_NAME)" > $(BLOCKDEV_PKG)/.PKGINFO ; \
+ echo "pkgver=$(BLOCKDEV_PKG_VERSION)" >> $(BLOCKDEV_PKG)/.PKGINFO ; \
+ echo "arch=$(BLOCKDEV_PKG_ARCH)" >> $(BLOCKDEV_PKG)/.PKGINFO ; \
+ echo "distroname=$(BLOCKDEV_PKG_DISTRO_NAME)" >> $(BLOCKDEV_PKG)/.PKGINFO ; \
+ echo "distrover=$(BLOCKDEV_PKG_DISTRO_VERSION)" >> $(BLOCKDEV_PKG)/.PKGINFO ; \
+ echo "group=$(BLOCKDEV_PKG_GROUP)" >> $(BLOCKDEV_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(BLOCKDEV_PKG_SHORT_DESCRIPTION)\"" >> $(BLOCKDEV_PKG)/.PKGINFO ; \
+ echo "url=$(BLOCKDEV_PKG_URL)" >> $(BLOCKDEV_PKG)/.PKGINFO ; \
+ echo "license=$(BLOCKDEV_PKG_LICENSE)" >> $(BLOCKDEV_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(BLOCKDEV_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: radix-1.9/libs/libblockdev/3.0.4/PATCHES
===================================================================
Index: radix-1.9/libs/libblockdev/3.0.4/libblockdev-pkg-description.in
===================================================================
--- radix-1.9/libs/libblockdev/3.0.4/libblockdev-pkg-description.in (nonexistent)
+++ radix-1.9/libs/libblockdev/3.0.4/libblockdev-pkg-description.in (revision 334)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+libblockdev: libblockdev @VERSION@ (library for manipulating block devices)
+libblockdev:
+libblockdev: libblockdev is a library for manipulating block devices.
+libblockdev:
+libblockdev: Homepage: https://github.com/storaged-project/libblockdev
+libblockdev:
+libblockdev:
+libblockdev:
+libblockdev:
+libblockdev:
+libblockdev:
Index: radix-1.9/libs/libblockdev/3.0.4/libblockdev-pkg-install.sh
===================================================================
--- radix-1.9/libs/libblockdev/3.0.4/libblockdev-pkg-install.sh (nonexistent)
+++ radix-1.9/libs/libblockdev/3.0.4/libblockdev-pkg-install.sh (revision 334)
@@ -0,0 +1,54 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ install_file etc/libblockdev/3/conf.d/00-default.cfg.new
+ install_file etc/libblockdev/3/conf.d/10-lvm-dbus.cfg.new
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: radix-1.9/libs/libblockdev/3.0.4/libblockdev-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: radix-1.9/libs/libblockdev/3.0.4
===================================================================
--- radix-1.9/libs/libblockdev/3.0.4 (nonexistent)
+++ radix-1.9/libs/libblockdev/3.0.4 (revision 334)
Property changes on: radix-1.9/libs/libblockdev/3.0.4
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/libs/libbytesize/2.10/Makefile
===================================================================
--- radix-1.9/libs/libbytesize/2.10/Makefile (nonexistent)
+++ radix-1.9/libs/libbytesize/2.10/Makefile (revision 334)
@@ -0,0 +1,262 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/libbytesize
+
+REQUIRES = libs/mpfr/4.1.0
+REQUIRES += libs/pcre2/10.36
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 2.10
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/libbytesize/libbytesize-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/libbytesize-$(version)
+src_dir_name = libbytesize-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = libs
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+BYTESIZE_PKG_NAME = libbytesize
+BYTESIZE_PKG_VERSION = 2.10
+BYTESIZE_PKG_ARCH = $(PKGARCH)
+BYTESIZE_PKG_DISTRO_NAME = $(DISTRO_NAME)
+BYTESIZE_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+BYTESIZE_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+BYTESIZE_PKG_SHORT_DESCRIPTION = library for working with big sizes in bytes
+BYTESIZE_PKG_URL = $(BUG_URL)
+BYTESIZE_PKG_LICENSE = LGPLv2.1
+BYTESIZE_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(BYTESIZE_PKG_NAME)-pkg-description
+BYTESIZE_PKG_DESCRIPTION_FILE_IN = $(BYTESIZE_PKG_NAME)-pkg-description.in
+BYTESIZE_PKG_INSTALL_SCRIPT = $(BYTESIZE_PKG_NAME)-pkg-install.sh
+
+BYTESIZE_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(BYTESIZE_PKG_NAME)-package
+
+pkg_basename = $(BYTESIZE_PKG_NAME)-$(BYTESIZE_PKG_VERSION)-$(BYTESIZE_PKG_ARCH)-$(BYTESIZE_PKG_DISTRO_NAME)-$(BYTESIZE_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(BYTESIZE_PKG)
+
+
+extra_configure_switches = --libdir=/usr/lib$(LIBSUFFIX)
+extra_configure_switches += --docdir=/usr/share/doc/$(src_dir_name)
+extra_configure_switches += --infodir=/usr/share/info
+extra_configure_switches += --mandir=/usr/share/man
+
+extra_configure_switches += --sysconfdir=/etc
+extra_configure_switches += --localstatedir=/var
+
+extra_configure_switches += --with-python3
+extra_configure_switches += --with-gtk-doc=no
+
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_LIB_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @cd $(build_dir) && \
+ $(BUILD_ENVIRONMENT) $(extra_environment) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET) \
+ $(extra_configure_switches)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(BYTESIZE_PKG)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(env_sysroot)
+ # ======= Install Documentation =======
+ @if [ -d $(BYTESIZE_PKG)/usr/share/man ]; then \
+ ( cd $(BYTESIZE_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(BYTESIZE_PKG)/usr/doc/$(src_dir_name)
+ @cp -a $(SRC_DIR)/LICENSE \
+ $(BYTESIZE_PKG)/usr/doc/$(src_dir_name)
+ @mkdir -p $(BYTESIZE_PKG)/usr/share/doc/$(src_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a LICENSE README.md \
+ $(BYTESIZE_PKG)/usr/share/doc/$(src_dir_name) ; \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r NEWS.rst ]; then \
+ DOCSDIR=`echo $(BYTESIZE_PKG)/usr/share/doc/$(src_dir_name)` ; \
+ cat NEWS.rst | head -n 1000 > $$DOCSDIR/NEWS.rst ; \
+ touch -r NEWS.rst $$DOCSDIR/NEWS.rst ; \
+ fi \
+ )
+ # ====== remove toolchain path from target libtool *.la files ======
+ @( cd $(BYTESIZE_PKG)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libbytesize.la ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(BYTESIZE_PKG))
+ # ======= tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libbytesize.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libbytesize.la ; \
+ )
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" bytesize.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(BYTESIZE_PKG) ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(BYTESIZE_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(BYTESIZE_PKG)/usr/lib$(LIBSUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(BYTESIZE_PKG_DESCRIPTION_FILE): $(BYTESIZE_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(BYTESIZE_PKG_DESCRIPTION_FILE) $(BYTESIZE_PKG_INSTALL_SCRIPT)
+ @cp $(BYTESIZE_PKG_DESCRIPTION_FILE) $(BYTESIZE_PKG)/.DESCRIPTION
+ @cp $(BYTESIZE_PKG_INSTALL_SCRIPT) $(BYTESIZE_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(BYTESIZE_PKG)/.REQUIRES
+ @echo "pkgname=$(BYTESIZE_PKG_NAME)" > $(BYTESIZE_PKG)/.PKGINFO ; \
+ echo "pkgver=$(BYTESIZE_PKG_VERSION)" >> $(BYTESIZE_PKG)/.PKGINFO ; \
+ echo "arch=$(BYTESIZE_PKG_ARCH)" >> $(BYTESIZE_PKG)/.PKGINFO ; \
+ echo "distroname=$(BYTESIZE_PKG_DISTRO_NAME)" >> $(BYTESIZE_PKG)/.PKGINFO ; \
+ echo "distrover=$(BYTESIZE_PKG_DISTRO_VERSION)" >> $(BYTESIZE_PKG)/.PKGINFO ; \
+ echo "group=$(BYTESIZE_PKG_GROUP)" >> $(BYTESIZE_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(BYTESIZE_PKG_SHORT_DESCRIPTION)\"" >> $(BYTESIZE_PKG)/.PKGINFO ; \
+ echo "url=$(BYTESIZE_PKG_URL)" >> $(BYTESIZE_PKG)/.PKGINFO ; \
+ echo "license=$(BYTESIZE_PKG_LICENSE)" >> $(BYTESIZE_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(BYTESIZE_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: radix-1.9/libs/libbytesize/2.10/PATCHES
===================================================================
Index: radix-1.9/libs/libbytesize/2.10/libbytesize-pkg-description.in
===================================================================
--- radix-1.9/libs/libbytesize/2.10/libbytesize-pkg-description.in (nonexistent)
+++ radix-1.9/libs/libbytesize/2.10/libbytesize-pkg-description.in (revision 334)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+libbytesize: libbytesize @VERSION@ (library for working with big sizes in bytes)
+libbytesize:
+libbytesize: libbytesize is a library providing a C class for working with
+libbytesize: arbitrary sizes in bytes.
+libbytesize:
+libbytesize:
+libbytesize:
+libbytesize: Homepage: https://github.com/storaged-project/libbytesize
+libbytesize:
+libbytesize:
+libbytesize:
Index: radix-1.9/libs/libbytesize/2.10/libbytesize-pkg-install.sh
===================================================================
--- radix-1.9/libs/libbytesize/2.10/libbytesize-pkg-install.sh (nonexistent)
+++ radix-1.9/libs/libbytesize/2.10/libbytesize-pkg-install.sh (revision 334)
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: radix-1.9/libs/libbytesize/2.10/libbytesize-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: radix-1.9/libs/libbytesize/2.10
===================================================================
--- radix-1.9/libs/libbytesize/2.10 (nonexistent)
+++ radix-1.9/libs/libbytesize/2.10 (revision 334)
Property changes on: radix-1.9/libs/libbytesize/2.10
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/libs/libnvme/1.7.1/Makefile
===================================================================
--- radix-1.9/libs/libnvme/1.7.1/Makefile (nonexistent)
+++ radix-1.9/libs/libnvme/1.7.1/Makefile (revision 334)
@@ -0,0 +1,353 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/libnvme
+
+REQUIRES = dev/python3/3.10.8
+REQUIRES += app/dbus/1.13.18
+REQUIRES += libs/keyutils/1.6.3
+REQUIRES += libs/json-c/0.15
+REQUIRES += net/openssl/1.1.1r
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 1.7.1
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/libnvme/libnvme-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/libnvme-$(version)
+src_dir_name = libnvme-$(version)
+doc_dir_name = libnvme-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+build_docs_dir = $(TARGET_BUILD_DIR)/build-docs
+
+cross_file = $(TARGET_BUILD_DIR)/$(TARGET)-cross
+
+
+####### Targets
+
+PKG_GROUP = libs
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+LIBNVME_PKG_NAME = libnvme
+LIBNVME_PKG_VERSION = 1.7.1
+LIBNVME_PKG_ARCH = $(PKGARCH)
+LIBNVME_PKG_DISTRO_NAME = $(DISTRO_NAME)
+LIBNVME_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+LIBNVME_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+LIBNVME_PKG_SHORT_DESCRIPTION = NVMe development C library
+LIBNVME_PKG_URL = $(BUG_URL)
+LIBNVME_PKG_LICENSE = LGPLv2.1
+LIBNVME_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(LIBNVME_PKG_NAME)-pkg-description
+LIBNVME_PKG_DESCRIPTION_FILE_IN = $(LIBNVME_PKG_NAME)-pkg-description.in
+LIBNVME_PKG_INSTALL_SCRIPT = $(LIBNVME_PKG_NAME)-pkg-install.sh
+
+LIBNVME_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(LIBNVME_PKG_NAME)-package
+
+pkg_basename = $(LIBNVME_PKG_NAME)-$(LIBNVME_PKG_VERSION)-$(LIBNVME_PKG_ARCH)-$(LIBNVME_PKG_DISTRO_NAME)-$(LIBNVME_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(LIBNVME_PKG)
+
+
+#
+# https://mesonbuild.com/Reference-tables.html :
+# =============================================
+#
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_A1X_GLIBC) $(TOOLCHAIN_A2X_GLIBC) \
+ $(TOOLCHAIN_H3_GLIBC) $(TOOLCHAIN_RK328X_GLIBC) \
+ $(TOOLCHAIN_S8XX_GLIBC) $(TOOLCHAIN_IMX6_GLIBC) \
+ $(TOOLCHAIN_AM335X_GLIBC) $(TOOLCHAIN_OMAP543X_GLIBC)),)
+cpu_name = arm
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_H5_GLIBC) $(TOOLCHAIN_RK33XX_GLIBC) \
+ $(TOOLCHAIN_RK339X_GLIBC) $(TOOLCHAIN_RK358X_GLIBC) \
+ $(TOOLCHAIN_S9XX_GLIBC) \
+ $(TOOLCHAIN_A311X_GLIBC) $(TOOLCHAIN_M1000_GLIBC)),)
+cpu_name = aarch64
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_JZ47XX_GLIBC) $(TOOLCHAIN_P5600_GLIBC)),)
+cpu_name = mips
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8_GLIBC) $(TOOLCHAIN_POWER9_GLIBC)),)
+cpu_name = ppc64
+endian = big
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8LE_GLIBC) $(TOOLCHAIN_POWER9LE_GLIBC)),)
+cpu_name = ppc64
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_RISCV64_GLIBC)),)
+cpu_name = riscv64
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_I586_GLIBC) $(TOOLCHAIN_I686_GLIBC)),)
+cpu_name = x86
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_X86_64_GLIBC)),)
+cpu_name = x86_64
+endian = little
+endif
+
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --default-library=both
+else
+extra_configure_switches += --default-library=shared
+endif
+
+
+extra_configure_switches += -Dversion-tag=''
+extra_configure_switches += -Dhtmldir=''
+extra_configure_switches += -Drstdir=''
+
+extra_configure_switches += -Ddocs=man
+extra_configure_switches += -Ddocs-build=true
+extra_configure_switches += -Dtests=false
+
+extra_configure_switches += -Dpython=enabled
+extra_configure_switches += -Dopenssl=enabled
+extra_configure_switches += -Dlibdbus=enabled
+extra_configure_switches += -Djson-c=enabled
+extra_configure_switches += -Dkeyutils=enabled
+
+
+PYTHON3_VERSION = 3.10
+
+python_environment = PYTHON=$(PYTHON3)
+python_environment += PYTHONPATH='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/gobject-introspection:$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/python$(PYTHON3_VERSION)/lib-dynload'
+
+
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_LIB_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @echo "" > $(cross_file)
+ @echo "[build_machine]" >> $(cross_file)
+ @echo "system = '$(shell uname -s | tr 'L' 'l')'" >> $(cross_file)
+ @echo "cpu_family = '$(shell uname -m)'" >> $(cross_file)
+ @echo "cpu = '$(shell uname -m)'" >> $(cross_file)
+ @echo "endian = '$(shell lscpu | grep Endian | tr -s ' ' | cut -f3 -d' ' | tr 'L' 'l')'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[host_machine]" >> $(cross_file)
+ @echo "system = 'linux'" >> $(cross_file)
+ @echo "cpu_family = '$(cpu_name)'" >> $(cross_file)
+ @echo "cpu = '$(cpu_name)'" >> $(cross_file)
+ @echo "endian = '$(endian)'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[target_machine]" >> $(cross_file)
+ @echo "system = 'linux'" >> $(cross_file)
+ @echo "cpu_family = '$(cpu_name)'" >> $(cross_file)
+ @echo "cpu = '$(cpu_name)'" >> $(cross_file)
+ @echo "endian = '$(endian)'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[binaries]" >> $(cross_file)
+ @echo "c = '$(TOOLCHAIN_PATH)/bin/$(TARGET)-gcc'" >> $(cross_file)
+ @echo "cpp = '$(TOOLCHAIN_PATH)/bin/$(TARGET)-g++'" >> $(cross_file)
+ @echo "ar = '$(AR)'" >> $(cross_file)
+ @echo "strip = '$(STRIP)'" >> $(cross_file)
+ @echo "pkgconfig = 'pkg-config'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @$(python_environment) \
+ meson setup \
+ --prefix=/usr \
+ --libdir=lib$(LIBSUFFIX) \
+ --libexecdir=/usr/libexec \
+ --bindir=/usr/bin \
+ --sbindir=/usr/sbin \
+ --includedir=/usr/include \
+ --datadir=/usr/share \
+ --mandir=/usr/share/man \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --buildtype=release \
+ -Dc_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(CFLAGS)" | tr -s ' '`" \
+ -Dc_link_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(LDFLAGS)" | tr -s ' '`" \
+ -Dcpp_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(CFLAGS)" | tr -s ' '`" \
+ -Dcpp_link_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(LDFLAGS)" | tr -s ' '`" \
+ $(extra_configure_switches) \
+ --cross-file=$(cross_file) $(SRC_DIR) $(build_dir)
+ @cd $(build_dir) && ninja -v
+ @touch $@
+
+$(install_target): $(build_target)
+ @cd $(build_dir) && $(env_sysroot) ninja install
+ # ======= Install Documentation =======
+ @if [ -d $(LIBNVME_PKG)/usr/share/man ]; then \
+ ( cd $(LIBNVME_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(LIBNVME_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(SRC_DIR)/COPYING \
+ $(LIBNVME_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(LIBNVME_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a COPYING README.md \
+ $(LIBNVME_PKG)/usr/share/doc/$(doc_dir_name) \
+ )
+ # ======= Install ChangeLog file =======
+ @( cd $(SRC_DIR) ; \
+ if [ -r NEWS ]; then \
+ DOCSDIR=`echo $(LIBNVME_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat NEWS | head -n 1000 > $$DOCSDIR/NEWS ; \
+ touch -r NEWS $$DOCSDIR/NEWS ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(LIBNVME_PKG))
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libnvme-mi.pc libnvme.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(LIBNVME_PKG) ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(LIBNVME_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(LIBNVME_PKG)/usr/lib$(LIBSUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(LIBNVME_PKG_DESCRIPTION_FILE): $(LIBNVME_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(LIBNVME_PKG_DESCRIPTION_FILE) $(LIBNVME_PKG_INSTALL_SCRIPT)
+ @cp $(LIBNVME_PKG_DESCRIPTION_FILE) $(LIBNVME_PKG)/.DESCRIPTION
+ @cp $(LIBNVME_PKG_INSTALL_SCRIPT) $(LIBNVME_PKG)/.INSTALL
+ @chmod a+x $(LIBNVME_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(LIBNVME_PKG)/.REQUIRES
+ @echo "pkgname=$(LIBNVME_PKG_NAME)" > $(LIBNVME_PKG)/.PKGINFO ; \
+ echo "pkgver=$(LIBNVME_PKG_VERSION)" >> $(LIBNVME_PKG)/.PKGINFO ; \
+ echo "arch=$(LIBNVME_PKG_ARCH)" >> $(LIBNVME_PKG)/.PKGINFO ; \
+ echo "distroname=$(LIBNVME_PKG_DISTRO_NAME)" >> $(LIBNVME_PKG)/.PKGINFO ; \
+ echo "distrover=$(LIBNVME_PKG_DISTRO_VERSION)" >> $(LIBNVME_PKG)/.PKGINFO ; \
+ echo "group=$(LIBNVME_PKG_GROUP)" >> $(LIBNVME_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(LIBNVME_PKG_SHORT_DESCRIPTION)\"" >> $(LIBNVME_PKG)/.PKGINFO ; \
+ echo "url=$(LIBNVME_PKG_URL)" >> $(LIBNVME_PKG)/.PKGINFO ; \
+ echo "license=$(LIBNVME_PKG_LICENSE)" >> $(LIBNVME_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(LIBNVME_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: radix-1.9/libs/libnvme/1.7.1/PATCHES
===================================================================
Index: radix-1.9/libs/libnvme/1.7.1/libnvme-pkg-description.in
===================================================================
--- radix-1.9/libs/libnvme/1.7.1/libnvme-pkg-description.in (nonexistent)
+++ radix-1.9/libs/libnvme/1.7.1/libnvme-pkg-description.in (revision 334)
@@ -0,0 +1,20 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+libnvme: libnvme @VERSION@ (NVMe development C library)
+libnvme:
+libnvme: libnvme provides type definitions for NVMe specification
+libnvme: structures, enumerations, and bit fields, helper functions
+libnvme: to construct, dispatch, and decode commands and payloads,
+libnvme: and utilities to connect, scan, and manage nvme devices
+libnvme: on a Linux system.
+libnvme:
+libnvme: Sources: https://github.com/linux-nvme/libnvme
+libnvme:
+libnvme:
+
Index: radix-1.9/libs/libnvme/1.7.1/libnvme-pkg-install.sh
===================================================================
--- radix-1.9/libs/libnvme/1.7.1/libnvme-pkg-install.sh (nonexistent)
+++ radix-1.9/libs/libnvme/1.7.1/libnvme-pkg-install.sh (revision 334)
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: radix-1.9/libs/libnvme/1.7.1/libnvme-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: radix-1.9/libs/libnvme/1.7.1
===================================================================
--- radix-1.9/libs/libnvme/1.7.1 (nonexistent)
+++ radix-1.9/libs/libnvme/1.7.1 (revision 334)
Property changes on: radix-1.9/libs/libnvme/1.7.1
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/libs/volume_key/0.3.12/Makefile
===================================================================
--- radix-1.9/libs/volume_key/0.3.12/Makefile (nonexistent)
+++ radix-1.9/libs/volume_key/0.3.12/Makefile (revision 334)
@@ -0,0 +1,305 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/volume_key
+
+REQUIRES = app/util-linux/2.38.1
+REQUIRES += app/cryptsetup/2.6.1
+REQUIRES += libs/glib2/2.76.0
+REQUIRES += net/gpgme/1.16.0
+REQUIRES += net/nss/3.93
+REQUIRES += dev/swig/4.0.2
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 0.3.12
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/volume_key/volume_key-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/volume_key-$(version)
+src_dir_name = volume_key-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = libs
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+VOLUME_KEY_PKG_NAME = volume_key
+VOLUME_KEY_PKG_VERSION = 0.3.12
+VOLUME_KEY_PKG_ARCH = $(PKGARCH)
+VOLUME_KEY_PKG_DISTRO_NAME = $(DISTRO_NAME)
+VOLUME_KEY_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+VOLUME_KEY_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+VOLUME_KEY_PKG_SHORT_DESCRIPTION = manipulate storage keys
+VOLUME_KEY_PKG_URL = $(BUG_URL)
+VOLUME_KEY_PKG_LICENSE = GPLv2
+VOLUME_KEY_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(VOLUME_KEY_PKG_NAME)-pkg-description
+VOLUME_KEY_PKG_DESCRIPTION_FILE_IN = $(VOLUME_KEY_PKG_NAME)-pkg-description.in
+VOLUME_KEY_PKG_INSTALL_SCRIPT = $(VOLUME_KEY_PKG_NAME)-pkg-install.sh
+
+VOLUME_KEY_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(VOLUME_KEY_PKG_NAME)-package
+
+pkg_basename = $(VOLUME_KEY_PKG_NAME)-$(VOLUME_KEY_PKG_VERSION)-$(VOLUME_KEY_PKG_ARCH)-$(VOLUME_KEY_PKG_DISTRO_NAME)-$(VOLUME_KEY_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(VOLUME_KEY_PKG)
+
+
+extra_configure_switches = --libdir=/usr/lib$(LIBSUFFIX)
+extra_configure_switches += --docdir=/usr/share/doc/$(src_dir_name)
+extra_configure_switches += --infodir=/usr/share/info
+extra_configure_switches += --mandir=/usr/share/man
+
+extra_configure_switches += --sysconfdir=/etc
+extra_configure_switches += --localstatedir=/var
+
+extra_configure_switches += --with-gpgme-prefix=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --with-python3
+extra_configure_switches += --with-python
+
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+PYTHON2_VERSION = 2.7
+PYTHON3_VERSION = 3.10
+
+
+CFLAGS += -Wno-deprecated-declarations -Wno-cast-function-type -Wno-shadow
+CFLAGS += -Wno-missing-field-initializers -Wno-discarded-qualifiers
+
+TARGET_BIN_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_BIN_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @cp -a $(CONFIG_GUESS) $(CONFIG_SUB) $(SRC_DIR)/admin
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @cd $(build_dir) && \
+ $(BUILD_ENVIRONMENT) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET) \
+ $(extra_configure_switches)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(VOLUME_KEY_PKG)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(env_sysroot)
+ # ======= Install Documentation =======
+ @if [ -d $(VOLUME_KEY_PKG)/usr/share/man ]; then \
+ ( cd $(VOLUME_KEY_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(VOLUME_KEY_PKG)/usr/doc/$(src_dir_name)
+ @cp -a $(SRC_DIR)/AUTHORS $(SRC_DIR)/COPYING \
+ $(VOLUME_KEY_PKG)/usr/doc/$(src_dir_name)
+ @mkdir -p $(VOLUME_KEY_PKG)/usr/share/doc/$(src_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a AUTHORS COPYING INSTALL README \
+ $(VOLUME_KEY_PKG)/usr/share/doc/$(src_dir_name) ; \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r ChangeLog ]; then \
+ DOCSDIR=`echo $(VOLUME_KEY_PKG)/usr/share/doc/$(src_dir_name)` ; \
+ cat ChangeLog | head -n 1000 > $$DOCSDIR/ChangeLog ; \
+ touch -r ChangeLog $$DOCSDIR/ChangeLog ; \
+ fi \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r NEWS ]; then \
+ DOCSDIR=`echo $(VOLUME_KEY_PKG)/usr/share/doc/$(src_dir_name)` ; \
+ cat NEWS | head -n 1000 > $$DOCSDIR/NEWS ; \
+ touch -r NEWS $$DOCSDIR/NEWS ; \
+ fi \
+ )
+ # ====== remove toolchain path from target libtool *.la files ======
+ @( cd $(VOLUME_KEY_PKG)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libvolume_key.la ; \
+ )
+ @( cd $(VOLUME_KEY_PKG)/usr/lib$(LIBSUFFIX)/python$(PYTHON2_VERSION)/site-packages ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" _volume_key.la ; \
+ sed -i "s,$(BUILDSYSTEM),,g" _volume_key.la ; \
+ )
+ @( cd $(VOLUME_KEY_PKG)/usr/lib$(LIBSUFFIX)/python$(PYTHON3_VERSION)/site-packages ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" _volume_key.la ; \
+ sed -i "s,$(BUILDSYSTEM),,g" _volume_key.la ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(VOLUME_KEY_PKG))
+ # ======= tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libvolume_key.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libvolume_key.la ; \
+ )
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/python$(PYTHON2_VERSION)/site-packages ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" _volume_key.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" _volume_key.la ; \
+ )
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/python$(PYTHON3_VERSION)/site-packages ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" _volume_key.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" _volume_key.la ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(VOLUME_KEY_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(VOLUME_KEY_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target binaries =======
+ @( cd $(VOLUME_KEY_PKG)/usr/bin ; \
+ for file in `find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_BIN_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(VOLUME_KEY_PKG)/usr/lib$(LIBSUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(VOLUME_KEY_PKG_DESCRIPTION_FILE): $(VOLUME_KEY_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(VOLUME_KEY_PKG_DESCRIPTION_FILE) $(VOLUME_KEY_PKG_INSTALL_SCRIPT)
+ @cp $(VOLUME_KEY_PKG_DESCRIPTION_FILE) $(VOLUME_KEY_PKG)/.DESCRIPTION
+ @cp $(VOLUME_KEY_PKG_INSTALL_SCRIPT) $(VOLUME_KEY_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(VOLUME_KEY_PKG)/.REQUIRES
+ @echo "pkgname=$(VOLUME_KEY_PKG_NAME)" > $(VOLUME_KEY_PKG)/.PKGINFO ; \
+ echo "pkgver=$(VOLUME_KEY_PKG_VERSION)" >> $(VOLUME_KEY_PKG)/.PKGINFO ; \
+ echo "arch=$(VOLUME_KEY_PKG_ARCH)" >> $(VOLUME_KEY_PKG)/.PKGINFO ; \
+ echo "distroname=$(VOLUME_KEY_PKG_DISTRO_NAME)" >> $(VOLUME_KEY_PKG)/.PKGINFO ; \
+ echo "distrover=$(VOLUME_KEY_PKG_DISTRO_VERSION)" >> $(VOLUME_KEY_PKG)/.PKGINFO ; \
+ echo "group=$(VOLUME_KEY_PKG_GROUP)" >> $(VOLUME_KEY_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(VOLUME_KEY_PKG_SHORT_DESCRIPTION)\"" >> $(VOLUME_KEY_PKG)/.PKGINFO ; \
+ echo "url=$(VOLUME_KEY_PKG_URL)" >> $(VOLUME_KEY_PKG)/.PKGINFO ; \
+ echo "license=$(VOLUME_KEY_PKG_LICENSE)" >> $(VOLUME_KEY_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(VOLUME_KEY_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: radix-1.9/libs/volume_key/0.3.12/PATCHES
===================================================================
Index: radix-1.9/libs/volume_key/0.3.12/volume_key-pkg-description.in
===================================================================
--- radix-1.9/libs/volume_key/0.3.12/volume_key-pkg-description.in (nonexistent)
+++ radix-1.9/libs/volume_key/0.3.12/volume_key-pkg-description.in (revision 334)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+volume_key: volume_key @VERSION@ (manipulate storage keys)
+volume_key:
+volume_key: The volume_key package provides a libvolume_key, a library
+volume_key: for manipulating storage volume encryption keys and storing
+volume_key: them separately from volumes, and an associated command-line
+volume_key: tool named volume_key.
+volume_key:
+volume_key: Homepage: https://pagure.io/volume_key/
+volume_key:
+volume_key:
+volume_key:
Index: radix-1.9/libs/volume_key/0.3.12/volume_key-pkg-install.sh
===================================================================
--- radix-1.9/libs/volume_key/0.3.12/volume_key-pkg-install.sh (nonexistent)
+++ radix-1.9/libs/volume_key/0.3.12/volume_key-pkg-install.sh (revision 334)
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: radix-1.9/libs/volume_key/0.3.12/volume_key-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: radix-1.9/libs/volume_key/0.3.12
===================================================================
--- radix-1.9/libs/volume_key/0.3.12 (nonexistent)
+++ radix-1.9/libs/volume_key/0.3.12 (revision 334)
Property changes on: radix-1.9/libs/volume_key/0.3.12
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/products/base/Makefile
===================================================================
--- radix-1.9/products/base/Makefile (revision 333)
+++ radix-1.9/products/base/Makefile (revision 334)
@@ -630,6 +630,7 @@
REQUIRES += app/mdadm/4.1
REQUIRES += app/nvme-cli/1.13
REQUIRES += app/gptfdisk/1.0.7
+REQUIRES += app/parted/3.6
REQUIRES += app/efibootmgr/18
REQUIRES += app/fakeroot/1.31
@@ -906,6 +907,16 @@
REQUIRES += app/qpdf/11.3.0-x86_32
endif
+REQUIRES += app/cryptsetup/2.6.1
+REQUIRES += libs/volume_key/0.3.12
+REQUIRES += libs/libatasmart/0.19
+REQUIRES += libs/libbytesize/2.10
+REQUIRES += libs/libnvme/1.7.1
+REQUIRES += libs/iniparser/4.1
+REQUIRES += app/ndctl/78
+REQUIRES += libs/libblockdev/3.0.4
+REQUIRES += app/udisks2/2.10.1
+
REQUIRES += libs/iso-codes/4.13.0
REQUIRES += libs/exiv2/0.28.1
REQUIRES += libs/exempi/2.6.5
Index: radix-1.9/sources/GNU/parted/Makefile
===================================================================
--- radix-1.9/sources/GNU/parted/Makefile (nonexistent)
+++ radix-1.9/sources/GNU/parted/Makefile (revision 334)
@@ -0,0 +1,47 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+
+include ../../../build-system/constants.mk
+
+
+url = $(DOWNLOAD_SERVER)/sources/GNU/parted
+
+versions = 3.6
+pkgname = parted
+suffix = tar.xz
+
+tarballs = $(addsuffix .$(suffix), $(addprefix $(pkgname)-, $(versions)))
+sha1s = $(addsuffix .sha1sum, $(tarballs))
+
+
+BUILD_TARGETS = $(tarballs) $(sha1s)
+
+
+include ../../../build-system/core.mk
+
+
+.PHONY: download_clean
+
+
+$(tarballs):
+ @echo -e "\n======= Downloading source tarballs =======" ; \
+ for tarball in $(tarballs) ; do \
+ echo "$(url)/$$tarball" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & \
+ done ; wait
+
+$(sha1s): $(tarballs)
+ @for sha in $@ ; do \
+ echo -e "\n======= Downloading '$$sha' signature =======\n" ; \
+ echo "$(url)/$$sha" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & wait %1 ; \
+ touch $$sha ; \
+ echo -e "\n======= Check the '$$sha' sha1sum =======\n" ; \
+ sha1sum --check $$sha ; ret="$$?" ; \
+ if [ "$$ret" == "1" ]; then \
+ echo -e "\n======= ERROR: Bad '$$sha' sha1sum =======\n" ; \
+ exit 1 ; \
+ fi ; \
+ done
+
+download_clean:
+ @rm -f $(tarballs) $(sha1s)
Index: radix-1.9/sources/GNU/parted
===================================================================
--- radix-1.9/sources/GNU/parted (nonexistent)
+++ radix-1.9/sources/GNU/parted (revision 334)
Property changes on: radix-1.9/sources/GNU/parted
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/sources/packages/a/cryptsetup/Makefile
===================================================================
--- radix-1.9/sources/packages/a/cryptsetup/Makefile (nonexistent)
+++ radix-1.9/sources/packages/a/cryptsetup/Makefile (revision 334)
@@ -0,0 +1,47 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+
+include ../../../../build-system/constants.mk
+
+
+url = $(DOWNLOAD_SERVER)/sources/packages/a/cryptsetup
+
+versions = 2.6.1
+pkgname = cryptsetup
+suffix = tar.xz
+
+tarballs = $(addsuffix .$(suffix), $(addprefix $(pkgname)-, $(versions)))
+sha1s = $(addsuffix .sha1sum, $(tarballs))
+
+
+BUILD_TARGETS = $(tarballs) $(sha1s)
+
+
+include ../../../../build-system/core.mk
+
+
+.PHONY: download_clean
+
+
+$(tarballs):
+ @echo -e "\n======= Downloading source tarballs =======" ; \
+ for tarball in $(tarballs) ; do \
+ echo "$(url)/$$tarball" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & \
+ done ; wait
+
+$(sha1s): $(tarballs)
+ @for sha in $@ ; do \
+ echo -e "\n======= Downloading '$$sha' signature =======\n" ; \
+ echo "$(url)/$$sha" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & wait %1 ; \
+ touch $$sha ; \
+ echo -e "\n======= Check the '$$sha' sha1sum =======\n" ; \
+ sha1sum --check $$sha ; ret="$$?" ; \
+ if [ "$$ret" == "1" ]; then \
+ echo -e "\n======= ERROR: Bad '$$sha' sha1sum =======\n" ; \
+ exit 1 ; \
+ fi ; \
+ done
+
+download_clean:
+ @rm -f $(tarballs) $(sha1s)
Index: radix-1.9/sources/packages/a/cryptsetup
===================================================================
--- radix-1.9/sources/packages/a/cryptsetup (nonexistent)
+++ radix-1.9/sources/packages/a/cryptsetup (revision 334)
Property changes on: radix-1.9/sources/packages/a/cryptsetup
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/sources/packages/a/ndctl/Makefile
===================================================================
--- radix-1.9/sources/packages/a/ndctl/Makefile (nonexistent)
+++ radix-1.9/sources/packages/a/ndctl/Makefile (revision 334)
@@ -0,0 +1,47 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+
+include ../../../../build-system/constants.mk
+
+
+url = $(DOWNLOAD_SERVER)/sources/packages/a/ndctl
+
+versions = 78
+pkgname = ndctl
+suffix = tar.xz
+
+tarballs = $(addsuffix .$(suffix), $(addprefix $(pkgname)-, $(versions)))
+sha1s = $(addsuffix .sha1sum, $(tarballs))
+
+
+BUILD_TARGETS = $(tarballs) $(sha1s)
+
+
+include ../../../../build-system/core.mk
+
+
+.PHONY: download_clean
+
+
+$(tarballs):
+ @echo -e "\n======= Downloading source tarballs =======" ; \
+ for tarball in $(tarballs) ; do \
+ echo "$(url)/$$tarball" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & \
+ done ; wait
+
+$(sha1s): $(tarballs)
+ @for sha in $@ ; do \
+ echo -e "\n======= Downloading '$$sha' signature =======\n" ; \
+ echo "$(url)/$$sha" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & wait %1 ; \
+ touch $$sha ; \
+ echo -e "\n======= Check the '$$sha' sha1sum =======\n" ; \
+ sha1sum --check $$sha ; ret="$$?" ; \
+ if [ "$$ret" == "1" ]; then \
+ echo -e "\n======= ERROR: Bad '$$sha' sha1sum =======\n" ; \
+ exit 1 ; \
+ fi ; \
+ done
+
+download_clean:
+ @rm -f $(tarballs) $(sha1s)
Index: radix-1.9/sources/packages/a/ndctl
===================================================================
--- radix-1.9/sources/packages/a/ndctl (nonexistent)
+++ radix-1.9/sources/packages/a/ndctl (revision 334)
Property changes on: radix-1.9/sources/packages/a/ndctl
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/sources/packages/a/udisks/Makefile
===================================================================
--- radix-1.9/sources/packages/a/udisks/Makefile (nonexistent)
+++ radix-1.9/sources/packages/a/udisks/Makefile (revision 334)
@@ -0,0 +1,47 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+
+include ../../../../build-system/constants.mk
+
+
+url = $(DOWNLOAD_SERVER)/sources/packages/a/udisks
+
+versions = 2.10.1
+pkgname = udisks
+suffix = tar.xz
+
+tarballs = $(addsuffix .$(suffix), $(addprefix $(pkgname)-, $(versions)))
+sha1s = $(addsuffix .sha1sum, $(tarballs))
+
+
+BUILD_TARGETS = $(tarballs) $(sha1s)
+
+
+include ../../../../build-system/core.mk
+
+
+.PHONY: download_clean
+
+
+$(tarballs):
+ @echo -e "\n======= Downloading source tarballs =======" ; \
+ for tarball in $(tarballs) ; do \
+ echo "$(url)/$$tarball" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & \
+ done ; wait
+
+$(sha1s): $(tarballs)
+ @for sha in $@ ; do \
+ echo -e "\n======= Downloading '$$sha' signature =======\n" ; \
+ echo "$(url)/$$sha" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & wait %1 ; \
+ touch $$sha ; \
+ echo -e "\n======= Check the '$$sha' sha1sum =======\n" ; \
+ sha1sum --check $$sha ; ret="$$?" ; \
+ if [ "$$ret" == "1" ]; then \
+ echo -e "\n======= ERROR: Bad '$$sha' sha1sum =======\n" ; \
+ exit 1 ; \
+ fi ; \
+ done
+
+download_clean:
+ @rm -f $(tarballs) $(sha1s)
Index: radix-1.9/sources/packages/a/udisks
===================================================================
--- radix-1.9/sources/packages/a/udisks (nonexistent)
+++ radix-1.9/sources/packages/a/udisks (revision 334)
Property changes on: radix-1.9/sources/packages/a/udisks
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/sources/packages/l/iniparser/Makefile
===================================================================
--- radix-1.9/sources/packages/l/iniparser/Makefile (nonexistent)
+++ radix-1.9/sources/packages/l/iniparser/Makefile (revision 334)
@@ -0,0 +1,47 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+
+include ../../../../build-system/constants.mk
+
+
+url = $(DOWNLOAD_SERVER)/sources/packages/l/iniparser
+
+versions = 4.1
+pkgname = iniparser
+suffix = tar.xz
+
+tarballs = $(addsuffix .$(suffix), $(addprefix $(pkgname)-, $(versions)))
+sha1s = $(addsuffix .sha1sum, $(tarballs))
+
+
+BUILD_TARGETS = $(tarballs) $(sha1s)
+
+
+include ../../../../build-system/core.mk
+
+
+.PHONY: download_clean
+
+
+$(tarballs):
+ @echo -e "\n======= Downloading source tarballs =======" ; \
+ for tarball in $(tarballs) ; do \
+ echo "$(url)/$$tarball" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & \
+ done ; wait
+
+$(sha1s): $(tarballs)
+ @for sha in $@ ; do \
+ echo -e "\n======= Downloading '$$sha' signature =======\n" ; \
+ echo "$(url)/$$sha" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & wait %1 ; \
+ touch $$sha ; \
+ echo -e "\n======= Check the '$$sha' sha1sum =======\n" ; \
+ sha1sum --check $$sha ; ret="$$?" ; \
+ if [ "$$ret" == "1" ]; then \
+ echo -e "\n======= ERROR: Bad '$$sha' sha1sum =======\n" ; \
+ exit 1 ; \
+ fi ; \
+ done
+
+download_clean:
+ @rm -f $(tarballs) $(sha1s)
Index: radix-1.9/sources/packages/l/iniparser
===================================================================
--- radix-1.9/sources/packages/l/iniparser (nonexistent)
+++ radix-1.9/sources/packages/l/iniparser (revision 334)
Property changes on: radix-1.9/sources/packages/l/iniparser
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/sources/packages/l/libatasmart/Makefile
===================================================================
--- radix-1.9/sources/packages/l/libatasmart/Makefile (nonexistent)
+++ radix-1.9/sources/packages/l/libatasmart/Makefile (revision 334)
@@ -0,0 +1,47 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+
+include ../../../../build-system/constants.mk
+
+
+url = $(DOWNLOAD_SERVER)/sources/packages/l/libatasmart
+
+versions = 0.19
+pkgname = libatasmart
+suffix = tar.xz
+
+tarballs = $(addsuffix .$(suffix), $(addprefix $(pkgname)-, $(versions)))
+sha1s = $(addsuffix .sha1sum, $(tarballs))
+
+
+BUILD_TARGETS = $(tarballs) $(sha1s)
+
+
+include ../../../../build-system/core.mk
+
+
+.PHONY: download_clean
+
+
+$(tarballs):
+ @echo -e "\n======= Downloading source tarballs =======\n" ; \
+ for tarball in $(tarballs) ; do \
+ echo "$(url)/$$tarball" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & \
+ done ; wait
+
+$(sha1s): $(tarballs)
+ @for sha in $@ ; do \
+ echo -e "\n======= Downloading '$$sha' signature =======\n" ; \
+ echo "$(url)/$$sha" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & wait %1 ; \
+ touch $$sha ; \
+ echo -e "\n======= Check the '$$sha' sha1sum =======\n" ; \
+ sha1sum --check $$sha ; ret="$$?" ; \
+ if [ "$$ret" == "1" ]; then \
+ echo -e "\n======= ERROR: Bad '$$sha' sha1sum =======\n" ; \
+ exit 1 ; \
+ fi ; \
+ done
+
+download_clean:
+ @rm -f $(tarballs) $(sha1s)
Index: radix-1.9/sources/packages/l/libatasmart
===================================================================
--- radix-1.9/sources/packages/l/libatasmart (nonexistent)
+++ radix-1.9/sources/packages/l/libatasmart (revision 334)
Property changes on: radix-1.9/sources/packages/l/libatasmart
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/sources/packages/l/libblockdev/Makefile
===================================================================
--- radix-1.9/sources/packages/l/libblockdev/Makefile (nonexistent)
+++ radix-1.9/sources/packages/l/libblockdev/Makefile (revision 334)
@@ -0,0 +1,47 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+
+include ../../../../build-system/constants.mk
+
+
+url = $(DOWNLOAD_SERVER)/sources/packages/l/libblockdev
+
+versions = 3.0.4
+pkgname = libblockdev
+suffix = tar.xz
+
+tarballs = $(addsuffix .$(suffix), $(addprefix $(pkgname)-, $(versions)))
+sha1s = $(addsuffix .sha1sum, $(tarballs))
+
+
+BUILD_TARGETS = $(tarballs) $(sha1s)
+
+
+include ../../../../build-system/core.mk
+
+
+.PHONY: download_clean
+
+
+$(tarballs):
+ @echo -e "\n======= Downloading source tarballs =======\n" ; \
+ for tarball in $(tarballs) ; do \
+ echo "$(url)/$$tarball" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & \
+ done ; wait
+
+$(sha1s): $(tarballs)
+ @for sha in $@ ; do \
+ echo -e "\n======= Downloading '$$sha' signature =======\n" ; \
+ echo "$(url)/$$sha" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & wait %1 ; \
+ touch $$sha ; \
+ echo -e "\n======= Check the '$$sha' sha1sum =======\n" ; \
+ sha1sum --check $$sha ; ret="$$?" ; \
+ if [ "$$ret" == "1" ]; then \
+ echo -e "\n======= ERROR: Bad '$$sha' sha1sum =======\n" ; \
+ exit 1 ; \
+ fi ; \
+ done
+
+download_clean:
+ @rm -f $(tarballs) $(sha1s)
Index: radix-1.9/sources/packages/l/libblockdev
===================================================================
--- radix-1.9/sources/packages/l/libblockdev (nonexistent)
+++ radix-1.9/sources/packages/l/libblockdev (revision 334)
Property changes on: radix-1.9/sources/packages/l/libblockdev
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/sources/packages/l/libbytesize/Makefile
===================================================================
--- radix-1.9/sources/packages/l/libbytesize/Makefile (nonexistent)
+++ radix-1.9/sources/packages/l/libbytesize/Makefile (revision 334)
@@ -0,0 +1,47 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+
+include ../../../../build-system/constants.mk
+
+
+url = $(DOWNLOAD_SERVER)/sources/packages/l/libbytesize
+
+versions = 2.10
+pkgname = libbytesize
+suffix = tar.xz
+
+tarballs = $(addsuffix .$(suffix), $(addprefix $(pkgname)-, $(versions)))
+sha1s = $(addsuffix .sha1sum, $(tarballs))
+
+
+BUILD_TARGETS = $(tarballs) $(sha1s)
+
+
+include ../../../../build-system/core.mk
+
+
+.PHONY: download_clean
+
+
+$(tarballs):
+ @echo -e "\n======= Downloading source tarballs =======\n" ; \
+ for tarball in $(tarballs) ; do \
+ echo "$(url)/$$tarball" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & \
+ done ; wait
+
+$(sha1s): $(tarballs)
+ @for sha in $@ ; do \
+ echo -e "\n======= Downloading '$$sha' signature =======\n" ; \
+ echo "$(url)/$$sha" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & wait %1 ; \
+ touch $$sha ; \
+ echo -e "\n======= Check the '$$sha' sha1sum =======\n" ; \
+ sha1sum --check $$sha ; ret="$$?" ; \
+ if [ "$$ret" == "1" ]; then \
+ echo -e "\n======= ERROR: Bad '$$sha' sha1sum =======\n" ; \
+ exit 1 ; \
+ fi ; \
+ done
+
+download_clean:
+ @rm -f $(tarballs) $(sha1s)
Index: radix-1.9/sources/packages/l/libbytesize
===================================================================
--- radix-1.9/sources/packages/l/libbytesize (nonexistent)
+++ radix-1.9/sources/packages/l/libbytesize (revision 334)
Property changes on: radix-1.9/sources/packages/l/libbytesize
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/sources/packages/l/libnvme/Makefile
===================================================================
--- radix-1.9/sources/packages/l/libnvme/Makefile (nonexistent)
+++ radix-1.9/sources/packages/l/libnvme/Makefile (revision 334)
@@ -0,0 +1,47 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+
+include ../../../../build-system/constants.mk
+
+
+url = $(DOWNLOAD_SERVER)/sources/packages/l/libnvme
+
+versions = 1.7.1
+pkgname = libnvme
+suffix = tar.xz
+
+tarballs = $(addsuffix .$(suffix), $(addprefix $(pkgname)-, $(versions)))
+sha1s = $(addsuffix .sha1sum, $(tarballs))
+
+
+BUILD_TARGETS = $(tarballs) $(sha1s)
+
+
+include ../../../../build-system/core.mk
+
+
+.PHONY: download_clean
+
+
+$(tarballs):
+ @echo -e "\n======= Downloading source tarballs =======\n" ; \
+ for tarball in $(tarballs) ; do \
+ echo "$(url)/$$tarball" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & \
+ done ; wait
+
+$(sha1s): $(tarballs)
+ @for sha in $@ ; do \
+ echo -e "\n======= Downloading '$$sha' signature =======\n" ; \
+ echo "$(url)/$$sha" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & wait %1 ; \
+ touch $$sha ; \
+ echo -e "\n======= Check the '$$sha' sha1sum =======\n" ; \
+ sha1sum --check $$sha ; ret="$$?" ; \
+ if [ "$$ret" == "1" ]; then \
+ echo -e "\n======= ERROR: Bad '$$sha' sha1sum =======\n" ; \
+ exit 1 ; \
+ fi ; \
+ done
+
+download_clean:
+ @rm -f $(tarballs) $(sha1s)
Index: radix-1.9/sources/packages/l/libnvme
===================================================================
--- radix-1.9/sources/packages/l/libnvme (nonexistent)
+++ radix-1.9/sources/packages/l/libnvme (revision 334)
Property changes on: radix-1.9/sources/packages/l/libnvme
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/sources/packages/l/volume_key/Makefile
===================================================================
--- radix-1.9/sources/packages/l/volume_key/Makefile (nonexistent)
+++ radix-1.9/sources/packages/l/volume_key/Makefile (revision 334)
@@ -0,0 +1,47 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+
+include ../../../../build-system/constants.mk
+
+
+url = $(DOWNLOAD_SERVER)/sources/packages/l/volume_key
+
+versions = 0.3.12
+pkgname = volume_key
+suffix = tar.xz
+
+tarballs = $(addsuffix .$(suffix), $(addprefix $(pkgname)-, $(versions)))
+sha1s = $(addsuffix .sha1sum, $(tarballs))
+
+
+BUILD_TARGETS = $(tarballs) $(sha1s)
+
+
+include ../../../../build-system/core.mk
+
+
+.PHONY: download_clean
+
+
+$(tarballs):
+ @echo -e "\n======= Downloading source tarballs =======\n" ; \
+ for tarball in $(tarballs) ; do \
+ echo "$(url)/$$tarball" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & \
+ done ; wait
+
+$(sha1s): $(tarballs)
+ @for sha in $@ ; do \
+ echo -e "\n======= Downloading '$$sha' signature =======\n" ; \
+ echo "$(url)/$$sha" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & wait %1 ; \
+ touch $$sha ; \
+ echo -e "\n======= Check the '$$sha' sha1sum =======\n" ; \
+ sha1sum --check $$sha ; ret="$$?" ; \
+ if [ "$$ret" == "1" ]; then \
+ echo -e "\n======= ERROR: Bad '$$sha' sha1sum =======\n" ; \
+ exit 1 ; \
+ fi ; \
+ done
+
+download_clean:
+ @rm -f $(tarballs) $(sha1s)
Index: radix-1.9/sources/packages/l/volume_key
===================================================================
--- radix-1.9/sources/packages/l/volume_key (nonexistent)
+++ radix-1.9/sources/packages/l/volume_key (revision 334)
Property changes on: radix-1.9/sources/packages/l/volume_key
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
383 Commits
1 Branch
1 Tag