Index: radix-1.9/boot/u-boot/leez-p710/2023.04/scripts/install-u-boot
===================================================================
--- radix-1.9/boot/u-boot/leez-p710/2023.04/scripts/install-u-boot (revision 205)
+++ radix-1.9/boot/u-boot/leez-p710/2023.04/scripts/install-u-boot (nonexistent)
@@ -1,4 +0,0 @@
-#!/bin/sh
-
-dd if=idbloader.img of=/dev/mmcblk2 bs=512 seek=64
-dd if=u-boot.itb of=/dev/mmcblk2 bs=512 seek=16384
Index: radix-1.9/boot/u-boot/leez-p710/2023.04/scripts/clean-emmc
===================================================================
--- radix-1.9/boot/u-boot/leez-p710/2023.04/scripts/clean-emmc (revision 205)
+++ radix-1.9/boot/u-boot/leez-p710/2023.04/scripts/clean-emmc (nonexistent)
@@ -1,18 +0,0 @@
-#!/bin/sh
-
-dd if=/dev/zero of=/dev/mmcblk2 bs=1M count=256
-
-fdisk --wipe=always --wipe-partition=always /dev/mmcblk2 <<EOF
-n
-p
-1
-32768
-
-a
-t
-83
-p
-w
-EOF
-
-mke2fs -t ext4 -L root0 -O 64bit /dev/mmcblk2p1
Index: radix-1.9/boot/u-boot/leez-p710/2023.04/u-boot-pkg-description.in
===================================================================
--- radix-1.9/boot/u-boot/leez-p710/2023.04/u-boot-pkg-description.in (revision 205)
+++ radix-1.9/boot/u-boot/leez-p710/2023.04/u-boot-pkg-description.in (nonexistent)
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
-# make exactly 11 lines for the formatting to be correct. It's also
-# customary to leave one space after the ':'.
-
- |-----handy-ruler------------------------------------------------------|
-u-boot: Das U-Boot @VERSION@ (for @HARDWARE_SPEC@ board)
-u-boot:
-u-boot: Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for
-u-boot: Embedded Power Architecture(R), ARM, MIPS, x86 and other processors.
-u-boot: The U-Boot project is hosted by DENX.
-u-boot:
-u-boot: Home page: http://www.denx.de/wiki/U-Boot
-u-boot: DENX Git Repository: https://source.denx.de/u-boot/u-boot
-u-boot:
-u-boot:
-u-boot:
Index: radix-1.9/boot/u-boot/leez-p710/2023.04/Makefile
===================================================================
--- radix-1.9/boot/u-boot/leez-p710/2023.04/Makefile (revision 205)
+++ radix-1.9/boot/u-boot/leez-p710/2023.04/Makefile (nonexistent)
@@ -1,295 +0,0 @@
-
-COMPONENT_TARGETS = $(HARDWARE_LEEZ_P710)
-
-NEED_ABS_PATH = true
-
-COMPONENT_IS_3PP = true
-
-
-include ../../../../build-system/constants.mk
-
-
-SOURCE_REQUIRES = sources/U-Boot/ATF
-SOURCE_REQUIRES += sources/U-Boot/denx
-
-REQUIRES = boot/kernel/leez-p710/6.1.53
-
-# ======= __END_OF_REQUIRES__ =======
-
-
-version = 2023.04
-tar_bz2_archive = $(SRC_PACKAGE_PATH)/U-Boot/denx/u-boot-$(version).tar.bz2
-SRC_ARCHIVE = $(tar_bz2_archive)
-SRC_DIR = $(TARGET_BUILD_DIR)/u-boot-$(version)
-src_done = $(TARGET_BUILD_DIR)/.source_done
-
-atf_version = 2.9.0
-atf_archive = $(SRC_PACKAGE_PATH)/U-Boot/ATF/arm-trusted-firmware-$(atf_version).tar.xz
-ATF_SRC_DIR = $(TARGET_BUILD_DIR)/arm-trusted-firmware-$(atf_version)
-atf_src_done = $(TARGET_BUILD_DIR)/.atf-source-done
-
-
-PATCHES = PATCHES
-
-
-bl31 = $(TARGET_DEST_DIR)/bootfs/bl31.elf
-
-u_boot = $(TARGET_BUILD_DIR)/.u_boot_done
-u_boot_config = leez-rk3399_defconfig
-
-#
-# Image, zImage from Linux kernel package:
-#
-kernel_version = 6.1.53
-linux_Image = $(TARGET_DEST_DIR)/bootfs/Image
-linux_zImage = $(TARGET_DEST_DIR)/bootfs/vmlinuz
-
-#
-# uImage, uzImage for U-Boot (see u-boot-2023.04/include/configs/rk3399_common.h):
-#
-kernel_addr = 0x02080000
-entry_point = $(kernel_addr)
-uImage = $(TARGET_BUILD_DIR)/uImage
-uzImage = $(TARGET_BUILD_DIR)/uzImage
-
-fdt_addr = 0x01f00000
-kernel_comp_addr = 0x08000000
-ramdisk_addr = 0x06000000
-
-#
-# Boot Scripts:
-#
-boot_emmc_script = $(TARGET_BUILD_DIR)/boot.emmc.script
-boot_emmc_scr = $(TARGET_BUILD_DIR)/boot.emmc.scr
-
-boot_sdhc_script = $(TARGET_BUILD_DIR)/boot.sdhc.script
-boot_sdhc_scr = $(TARGET_BUILD_DIR)/boot.sdhc.scr
-
-
-boot_records = $(TARGET_BUILD_DIR)/$(HARDWARE).boot-records
-install_boot_records = $(TARGET_BUILD_DIR)/.boot_records_done
-
-
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_RK339X_GLIBC)),)
-ARCH = arm64
-endif
-
-USE_TARGET_DEST_DIR_SYSROOT = no
-
-
-####### Targets
-
-PKG_GROUP = boot
-
-
-UBOOT_BIN_PKG_NAME = u-boot
-UBOOT_BIN_PKG_VERSION = 2023.04
-UBOOT_BIN_PKG_ARCH = $(PKGARCH)
-UBOOT_BIN_PKG_DISTRO_NAME = $(DISTRO_NAME)
-UBOOT_BIN_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
-UBOOT_BIN_PKG_GROUP = $(PKG_GROUP)
-### |---handy-ruler-------------------------------|
-UBOOT_BIN_PKG_SHORT_DESCRIPTION = Denx mainline U-Boot
-UBOOT_BIN_PKG_URL = $(BUG_URL)
-UBOOT_BIN_PKG_LICENSE = custom
-UBOOT_BIN_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(UBOOT_BIN_PKG_NAME)-pkg-description
-UBOOT_BIN_PKG_DESCRIPTION_FILE_IN = $(UBOOT_BIN_PKG_NAME)-pkg-description.in
-UBOOT_BIN_PKG_INSTALL_SCRIPT = $(UBOOT_BIN_PKG_NAME)-pkg-install.sh
-
-UBOOT_BIN_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(UBOOT_BIN_PKG_NAME)-package
-
-build_uboot_pkg = $(TARGET_BUILD_DIR)/.u_boot_pkg_done
-
-pkg_basename = $(UBOOT_BIN_PKG_NAME)-$(UBOOT_BIN_PKG_VERSION)-$(UBOOT_BIN_PKG_ARCH)-$(UBOOT_BIN_PKG_DISTRO_NAME)-$(UBOOT_BIN_PKG_DISTRO_VERSION)
-
-pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
-pkg_certificate = $(call cert-name,$(pkg_archive))
-pkg_signature = $(call sign-name,$(pkg_archive))
-pkg_description = $(call desc-name,$(pkg_archive))
-products = $(call pkg-files,$(pkg_archive))
-
-BUILD_TARGETS = $(bl31)
-BUILD_TARGETS += $(u_boot)
-BUILD_TARGETS += $(uImage)
-BUILD_TARGETS += $(uzImage)
-BUILD_TARGETS += $(boot_emmc_script)
-BUILD_TARGETS += $(boot_sdhc_script)
-BUILD_TARGETS += $(boot_emmc_scr)
-BUILD_TARGETS += $(boot_sdhc_scr)
-BUILD_TARGETS += $(build_uboot_pkg)
-BUILD_TARGETS += $(install_boot_records)
-
-PRODUCT_TARGETS = $(products)
-
-ROOTFS_TARGETS = $(pkg_archive)
-
-
-include ../../../../build-system/core.mk
-
-#
-# armv7-m (cortex-m0) toolchain:
-#
-M0_TOOLCHAIN_PATH = /opt/toolchains/arm-NONE-eabi-newlib/1.9.8
-CORTEX_M0_SETTINGS = M0_CROSS_COMPILE=$(M0_TOOLCHAIN_PATH)/bin/arm-none-eabi- PLAT=rk3399 bl31
-
-HOST_TOOLS_SETTINGS = PYTHON3=/usr/bin/python3 HOSTLDFLAGS='-L/usr/lib64' HOSTCFLAGS='-I/usr/include'
-
-device_dtb = rk3399-leez-p710.dtb
-
-#
-# Extra kernel boot arguments:
-#
-extra = consoleblank=0
-extra += no_console_suspend
-
-
-####### Dependencies
-
-
-$(atf_src_done): $(atf_archive)
- @echo "Expanding $(atf_archive)"
- @tar xJf $(atf_archive) -C $(TARGET_BUILD_DIR)
- @touch $@
-
-$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP) $(atf_src_done)
- $(UNPACK_SRC_ARCHIVE)
- $(APPLY_PATCHES)
- @( cd $(SRC_DIR)/configs ; \
- echo '# Set BOOTDELAY options:' >> $(u_boot_config) ; \
- echo 'CONFIG_SYS_PROMPT="$(HARDWARE)# "' >> $(u_boot_config) ; \
- echo 'CONFIG_BOOTDELAY=3' >> $(u_boot_config) ; \
- echo 'CONFIG_AUTOBOOT_KEYED=y' >> $(u_boot_config) ; \
- echo 'CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"' >> $(u_boot_config) ; \
- echo 'CONFIG_AUTOBOOT_STOP_STR=" "' >> $(u_boot_config) ; \
- )
- # ======= Suppress RK3399 'mmio_write_32' CPP Macro warnings =======
- @( cd $(ATF_SRC_DIR) ; \
- sed -i 's,^\(CFLAGS[ \t]*:=.*\),\1 -Wno-array-bounds,' plat/rockchip/rk3399/drivers/m0/Makefile ; \
- )
- # ======= Suppress '_elf.so has a LOAD segment with RWX permissions' warnings =======
- @( cd $(SRC_DIR) ; \
- sed -i 's,^\(KBUILD_LDFLAGS[ \t]*:=\).*,\1 --no-warn-rwx-segments,' Makefile ; \
- sed -i 's,^\(cmd_efi_ld = $$(LD)\),\1 --no-warn-rwx-segments,' scripts/Makefile.lib ; \
- )
- @touch $@
-
-AMAKE := LDFLAGS='--no-warn-rwx-segments' \
- $(MAKE) -C $(ATF_SRC_DIR) CROSS_COMPILE='$(CROSS_PREFIX)' $(CORTEX_M0_SETTINGS)
-
-$(bl31): $(src_done)
- +$(AMAKE)
- @cp -a $(ATF_SRC_DIR)/build/rk3399/release/bl31/bl31.elf $@
-
-UMAKE := $(HOST_TOOLS_SETTINGS) $(MAKE) -C $(SRC_DIR) BL31=$(bl31) CROSS_COMPILE='$(CROSS_PREFIX)'
-
-$(u_boot): $(bl31)
- +$(UMAKE) $(u_boot_config)
- +$(UMAKE)
- @touch $@
-
-$(uImage): $(u_boot)
- $(CURDIR)/$(SRC_DIR)/tools/mkimage \
- -A $(ARCH) -O linux -T kernel -C none -a $(kernel_addr) -e $(entry_point) \
- -n $(kernel_version) -d $(linux_Image) $@
-
-$(uzImage): $(u_boot)
- $(CURDIR)/$(SRC_DIR)/tools/mkimage \
- -A $(ARCH) -O linux -T kernel -C lzma -a $(kernel_addr) -e $(entry_point) \
- -n $(kernel_version) -d $(linux_zImage) $@
-
-#
-# NOTE:
-# ====
-# eMMC is always mmc0 in u-boot and mmcblk2 in kernel
-# sdhc is always mmc1 in u-boot and mmcblk1 in kernel
-#
-
-$(boot_emmc_script): $(uzImage)
- @( echo "" > $(boot_emmc_script) && \
- echo "mmc dev 0" >> $(boot_emmc_script) && \
- echo "mmcinfo" >> $(boot_emmc_script) && \
- echo "ext4load mmc 0:1 \$${kernel_comp_addr_r} /boot/uzImage" >> $(boot_emmc_script) && \
- echo "ext4load mmc 0:1 \$${fdt_addr_r} /boot/rockchip/$(device_dtb)" >> $(boot_emmc_script) && \
- echo "setenv bootargs 'earlyprintk console=ttyS2,1500000n8 console=tty1 ro root=/dev/mmcblk2p1 rootwait rootfstype=ext4 $(extra)'" >> $(boot_emmc_script) && \
- echo "bootm \$${kernel_comp_addr_r} - \$${fdt_addr_r}" >> $(boot_emmc_script) \
- )
-
-$(boot_emmc_scr): $(boot_emmc_script)
- $(CURDIR)/$(SRC_DIR)/tools/mkimage -A $(ARCH) -T script -C none -n "Boot Script" -d $< $@
-
-$(boot_sdhc_script): $(uzImage)
- @( echo "" > $(boot_sdhc_script) && \
- echo "mmc dev 1" >> $(boot_sdhc_script) && \
- echo "mmcinfo" >> $(boot_sdhc_script) && \
- echo "ext4load mmc 1:1 \$${kernel_comp_addr_r} /boot/uzImage" >> $(boot_sdhc_script) && \
- echo "ext4load mmc 1:1 \$${fdt_addr_r} /boot/rockchip/$(device_dtb)" >> $(boot_sdhc_script) && \
- echo "setenv bootargs 'earlyprintk console=ttyS2,1500000n8 console=tty1 ro root=/dev/mmcblk1p1 rootwait rootfstype=ext4 $(extra)'" >> $(boot_sdhc_script) && \
- echo "bootm \$${kernel_comp_addr_r} - \$${fdt_addr_r}" >> $(boot_sdhc_script) \
- )
-
-$(boot_sdhc_scr): $(boot_sdhc_script)
- $(CURDIR)/$(SRC_DIR)/tools/mkimage -A $(ARCH) -T script -C none -n "Boot Script" -d $< $@
-
-$(build_uboot_pkg): $(boot_emmc_scr) $(boot_sdhc_scr)
- @mkdir -p $(TARGET_DEST_DIR)/bootfs/u-boot
- @mkdir -p $(UBOOT_BIN_PKG)/boot/u-boot
- # ======= install U-Boot images =======
- @cp -a $(SRC_DIR)/idbloader.img $(SRC_DIR)/u-boot.itb $(UBOOT_BIN_PKG)/boot/u-boot
- # ======= install signed kernel and script images =======
- @cp -a $(uImage) $(uzImage) $(boot_emmc_scr) $(boot_sdhc_scr) $(UBOOT_BIN_PKG)/boot
- @( cd $(UBOOT_BIN_PKG)/boot ; \
- ln -sf boot.sdhc.scr boot.scr ; \
- )
- # ======= install eMMC service scripts =======
- @cp $(CURDIR)/scripts/{clean-emmc,install-u-boot} $(UBOOT_BIN_PKG)/boot/u-boot
- @chmod 755 $(UBOOT_BIN_PKG)/boot/u-boot/{clean-emmc,install-u-boot}
- # ======= copy U-Boot images and binaries into devenv =======
- @cp -a $(uImage) $(uzImage) $(boot_emmc_scr) $(boot_sdhc_scr) $(TARGET_DEST_DIR)/bootfs
- @cp -a $(SRC_DIR)/idbloader.img $(SRC_DIR)/u-boot.itb $(TARGET_DEST_DIR)/bootfs/u-boot
- # ======= install Documentation =======
- @mkdir -p $(UBOOT_BIN_PKG)/usr/doc/u-boot-$(version)
- @cp -a $(SRC_DIR)/Licenses $(SRC_DIR)/MAINTAINERS $(SRC_DIR)/README \
- $(UBOOT_BIN_PKG)/usr/doc/u-boot-$(version)
- @touch $@
-
-$(boot_records): $(build_uboot_pkg)
- @$(DD) if=/dev/zero of=$@ bs=512 count=32768 conv=notrunc
- # ======= Setup u-boot into unallocated space of disk image =======
- @$(DD) if=$(UBOOT_BIN_PKG)/boot/u-boot/idbloader.img of=$@ bs=512 seek=64 conv=notrunc
- @$(DD) if=$(UBOOT_BIN_PKG)/boot/u-boot/u-boot.itb of=$@ bs=512 seek=16384 conv=notrunc
- @touch $@
-
-$(install_boot_records): $(boot_records)
- @$(BUILDSYSTEM)/install_targets \
- --destination=$(PRODUCTS_DEST_DIR) \
- --toolchain=$(TOOLCHAIN) \
- --hardware=$(HARDWARE) \
- --flavour=$(FLAVOUR) \
- $^
- @touch $@
-
-$(UBOOT_BIN_PKG_DESCRIPTION_FILE): $(UBOOT_BIN_PKG_DESCRIPTION_FILE_IN)
- @cat $< | $(SED) -e "s/@VERSION@/$(UBOOT_BIN_PKG_VERSION)/g" | \
- $(SED) -e "s/@HARDWARE_SPEC@/$(HW_SPEC)/g"> $@
-
-$(pkg_certificate) : $(pkg_archive) ;
-$(pkg_signature) : $(pkg_archive) ;
-$(pkg_description) : $(pkg_archive) ;
-
-$(pkg_archive): $(install_boot_records) $(UBOOT_BIN_PKG_DESCRIPTION_FILE) $(UBOOT_BIN_PKG_INSTALL_SCRIPT)
- @cp $(UBOOT_BIN_PKG_DESCRIPTION_FILE) $(UBOOT_BIN_PKG)/.DESCRIPTION
- @cp $(UBOOT_BIN_PKG_INSTALL_SCRIPT) $(UBOOT_BIN_PKG)/.INSTALL
- @chmod a+x $(UBOOT_BIN_PKG)/.INSTALL
- @$(BUILD_PKG_REQUIRES) $(UBOOT_BIN_PKG)/.REQUIRES
- @echo "pkgname=$(UBOOT_BIN_PKG_NAME)" > $(UBOOT_BIN_PKG)/.PKGINFO ; \
- echo "pkgver=$(UBOOT_BIN_PKG_VERSION)" >> $(UBOOT_BIN_PKG)/.PKGINFO ; \
- echo "arch=$(UBOOT_BIN_PKG_ARCH)" >> $(UBOOT_BIN_PKG)/.PKGINFO ; \
- echo "distroname=$(UBOOT_BIN_PKG_DISTRO_NAME)" >> $(UBOOT_BIN_PKG)/.PKGINFO ; \
- echo "distrover=$(UBOOT_BIN_PKG_DISTRO_VERSION)" >> $(UBOOT_BIN_PKG)/.PKGINFO ; \
- echo "group=$(UBOOT_BIN_PKG_GROUP)" >> $(UBOOT_BIN_PKG)/.PKGINFO ; \
- echo "short_description=\"$(UBOOT_BIN_PKG_SHORT_DESCRIPTION)\"" >> $(UBOOT_BIN_PKG)/.PKGINFO ; \
- echo "url=$(UBOOT_BIN_PKG_URL)" >> $(UBOOT_BIN_PKG)/.PKGINFO ; \
- echo "license=$(UBOOT_BIN_PKG_LICENSE)" >> $(UBOOT_BIN_PKG)/.PKGINFO
- @$(PSEUDO) sh -c "cd $(UBOOT_BIN_PKG) && \
- chown -R root:root . && \
- $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: radix-1.9/boot/u-boot/leez-p710/2023.04/u-boot-pkg-install.sh
===================================================================
--- radix-1.9/boot/u-boot/leez-p710/2023.04/u-boot-pkg-install.sh (revision 205)
+++ radix-1.9/boot/u-boot/leez-p710/2023.04/u-boot-pkg-install.sh (nonexistent)
@@ -1,54 +0,0 @@
-#!/bin/sh
-
-# Preserve new files
-install_file() {
- NEW="$1"
- OLD="`dirname $NEW`/`basename $NEW .new`"
- # If there's no file by that name, mv it over:
- if [ ! -r $OLD ]; then
- mv $NEW $OLD
- elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then
- # toss the redundant copy:
- rm $NEW
- fi
- # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-
-# arg 1: the new package version
-pre_install() {
- /bin/true
-}
-
-# arg 1: the new package version
-post_install() {
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-pre_update() {
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-post_update() {
- post_install
-}
-
-# arg 1: the old package version
-pre_remove() {
- /bin/true
-}
-
-# arg 1: the old package version
-post_remove() {
- /bin/true
-}
-
-
-operation=$1
-shift
-
-$operation $*
Property changes on: radix-1.9/boot/u-boot/leez-p710/2023.04/u-boot-pkg-install.sh
___________________________________________________________________
Deleted: svn:executable
## -1 +0,0 ##
-*
\ No newline at end of property
Index: radix-1.9/boot/u-boot/leez-p710/2023.04
===================================================================
--- radix-1.9/boot/u-boot/leez-p710/2023.04 (revision 205)
+++ radix-1.9/boot/u-boot/leez-p710/2023.04 (nonexistent)
Property changes on: radix-1.9/boot/u-boot/leez-p710/2023.04
___________________________________________________________________
Deleted: svn:ignore
## -1,74 +0,0 ##
-
-# install dir
-dist
-
-# Target build dirs
-.a1x-newlib
-.a2x-newlib
-.at91sam7s-newlib
-
-.build-machine
-
-.a1x-glibc
-.a2x-glibc
-.h3-glibc
-.h5-glibc
-.i586-glibc
-.i686-glibc
-.imx6-glibc
-.jz47xx-glibc
-.makefile
-.am335x-glibc
-.omap543x-glibc
-.p5600-glibc
-.power8-glibc
-.power8le-glibc
-.power9-glibc
-.power9le-glibc
-.m1000-glibc
-.riscv64-glibc
-.rk328x-glibc
-.rk33xx-glibc
-.rk339x-glibc
-.rk358x-glibc
-.s8xx-glibc
-.s9xx-glibc
-.x86_64-glibc
-
-# Hidden files (each file)
-.makefile
-.dist
-.rootfs
-
-# src & hw requires
-.src_requires
-.src_requires_depend
-.requires
-.requires_depend
-
-# Tarballs
-*.gz
-*.bz2
-*.lz
-*.xz
-*.tgz
-*.txz
-
-# Signatures
-*.asc
-*.sig
-*.sign
-*.sha1sum
-
-# Patches
-*.patch
-
-# Descriptions
-*.dsc
-*.txt
-
-# Default linux config files
-*.defconfig
-
-# backup copies
-*~
Index: radix-1.9/boot/u-boot/leez-p710/2022.10/Makefile
===================================================================
--- radix-1.9/boot/u-boot/leez-p710/2022.10/Makefile (nonexistent)
+++ radix-1.9/boot/u-boot/leez-p710/2022.10/Makefile (revision 206)
@@ -0,0 +1,297 @@
+
+COMPONENT_TARGETS = $(HARDWARE_LEEZ_P710)
+
+NEED_ABS_PATH = true
+
+COMPONENT_IS_3PP = true
+
+
+include ../../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/U-Boot/ATF
+SOURCE_REQUIRES += sources/U-Boot/denx
+
+REQUIRES = boot/kernel/leez-p710/6.1.53
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 2022.10
+tar_bz2_archive = $(SRC_PACKAGE_PATH)/U-Boot/denx/u-boot-$(version).tar.bz2
+SRC_ARCHIVE = $(tar_bz2_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/u-boot-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+atf_version = 2.9.0
+atf_archive = $(SRC_PACKAGE_PATH)/U-Boot/ATF/arm-trusted-firmware-$(atf_version).tar.xz
+ATF_SRC_DIR = $(TARGET_BUILD_DIR)/arm-trusted-firmware-$(atf_version)
+atf_src_done = $(TARGET_BUILD_DIR)/.atf-source-done
+
+
+PATCHES = PATCHES
+
+
+bl31 = $(TARGET_DEST_DIR)/bootfs/bl31.elf
+
+u_boot = $(TARGET_BUILD_DIR)/.u_boot_done
+u_boot_config = leez-rk3399_defconfig
+
+#
+# Image, zImage from Linux kernel package:
+#
+kernel_version = 6.1.53
+linux_Image = $(TARGET_DEST_DIR)/bootfs/Image
+linux_zImage = $(TARGET_DEST_DIR)/bootfs/vmlinuz
+
+#
+# uImage, uzImage for U-Boot (see u-boot-2022.10/include/configs/rk3399_common.h):
+#
+kernel_addr = 0x02080000
+entry_point = $(kernel_addr)
+uImage = $(TARGET_BUILD_DIR)/uImage
+uzImage = $(TARGET_BUILD_DIR)/uzImage
+
+fdt_addr = 0x01f00000
+kernel_comp_addr = 0x08000000
+ramdisk_addr = 0x06000000
+
+#
+# Boot Scripts:
+#
+boot_emmc_script = $(TARGET_BUILD_DIR)/boot.emmc.script
+boot_emmc_scr = $(TARGET_BUILD_DIR)/boot.emmc.scr
+
+boot_sdhc_script = $(TARGET_BUILD_DIR)/boot.sdhc.script
+boot_sdhc_scr = $(TARGET_BUILD_DIR)/boot.sdhc.scr
+
+
+boot_records = $(TARGET_BUILD_DIR)/$(HARDWARE).boot-records
+install_boot_records = $(TARGET_BUILD_DIR)/.boot_records_done
+
+
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_RK339X_GLIBC)),)
+ARCH = arm64
+endif
+
+USE_TARGET_DEST_DIR_SYSROOT = no
+
+
+####### Targets
+
+PKG_GROUP = boot
+
+
+UBOOT_BIN_PKG_NAME = u-boot
+UBOOT_BIN_PKG_VERSION = 2022.10
+UBOOT_BIN_PKG_ARCH = $(PKGARCH)
+UBOOT_BIN_PKG_DISTRO_NAME = $(DISTRO_NAME)
+UBOOT_BIN_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+UBOOT_BIN_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+UBOOT_BIN_PKG_SHORT_DESCRIPTION = Denx mainline U-Boot
+UBOOT_BIN_PKG_URL = $(BUG_URL)
+UBOOT_BIN_PKG_LICENSE = custom
+UBOOT_BIN_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(UBOOT_BIN_PKG_NAME)-pkg-description
+UBOOT_BIN_PKG_DESCRIPTION_FILE_IN = $(UBOOT_BIN_PKG_NAME)-pkg-description.in
+UBOOT_BIN_PKG_INSTALL_SCRIPT = $(UBOOT_BIN_PKG_NAME)-pkg-install.sh
+
+UBOOT_BIN_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(UBOOT_BIN_PKG_NAME)-package
+
+build_uboot_pkg = $(TARGET_BUILD_DIR)/.u_boot_pkg_done
+
+pkg_basename = $(UBOOT_BIN_PKG_NAME)-$(UBOOT_BIN_PKG_VERSION)-$(UBOOT_BIN_PKG_ARCH)-$(UBOOT_BIN_PKG_DISTRO_NAME)-$(UBOOT_BIN_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(bl31)
+BUILD_TARGETS += $(u_boot)
+BUILD_TARGETS += $(uImage)
+BUILD_TARGETS += $(uzImage)
+BUILD_TARGETS += $(boot_emmc_script)
+BUILD_TARGETS += $(boot_sdhc_script)
+BUILD_TARGETS += $(boot_emmc_scr)
+BUILD_TARGETS += $(boot_sdhc_scr)
+BUILD_TARGETS += $(build_uboot_pkg)
+BUILD_TARGETS += $(install_boot_records)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../../build-system/core.mk
+
+#
+# armv7-m (cortex-m0) toolchain:
+#
+M0_TOOLCHAIN_PATH = /opt/toolchains/arm-NONE-eabi-newlib/1.9.8
+CORTEX_M0_SETTINGS = M0_CROSS_COMPILE=$(M0_TOOLCHAIN_PATH)/bin/arm-none-eabi- PLAT=rk3399 bl31
+
+suppress-warnings = -Wno-maybe-uninitialized -Wno-stringop-truncation
+
+HOST_TOOLS_SETTINGS = PYTHON3=/usr/bin/python3 HOSTLDFLAGS='-L/usr/lib64' HOSTCFLAGS='-I/usr/include $(suppress-warnings)'
+
+device_dtb = rk3399-leez-p710.dtb
+
+#
+# Extra kernel boot arguments:
+#
+extra = consoleblank=0
+extra += no_console_suspend
+
+
+####### Dependencies
+
+
+$(atf_src_done): $(atf_archive)
+ @echo "Expanding $(atf_archive)"
+ @tar xJf $(atf_archive) -C $(TARGET_BUILD_DIR)
+ @touch $@
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP) $(atf_src_done)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @( cd $(SRC_DIR)/configs ; \
+ echo '# Set BOOTDELAY options:' >> $(u_boot_config) ; \
+ echo 'CONFIG_SYS_PROMPT="$(HARDWARE)# "' >> $(u_boot_config) ; \
+ echo 'CONFIG_BOOTDELAY=3' >> $(u_boot_config) ; \
+ echo 'CONFIG_AUTOBOOT_KEYED=y' >> $(u_boot_config) ; \
+ echo 'CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"' >> $(u_boot_config) ; \
+ echo 'CONFIG_AUTOBOOT_STOP_STR=" "' >> $(u_boot_config) ; \
+ )
+ # ======= Suppress RK3399 'mmio_write_32' CPP Macro warnings =======
+ @( cd $(ATF_SRC_DIR) ; \
+ sed -i 's,^\(CFLAGS[ \t]*:=.*\),\1 -Wno-array-bounds,' plat/rockchip/rk3399/drivers/m0/Makefile ; \
+ )
+ # ======= Suppress '_elf.so has a LOAD segment with RWX permissions' warnings =======
+ @( cd $(SRC_DIR) ; \
+ sed -i 's,^\(KBUILD_LDFLAGS[ \t]*:=\).*,\1 --no-warn-rwx-segments,' Makefile ; \
+ sed -i 's,^\(cmd_efi_ld = $$(LD)\),\1 --no-warn-rwx-segments,' scripts/Makefile.lib ; \
+ )
+ @touch $@
+
+AMAKE := LDFLAGS='--no-warn-rwx-segments' \
+ $(MAKE) -C $(ATF_SRC_DIR) CROSS_COMPILE='$(CROSS_PREFIX)' $(CORTEX_M0_SETTINGS)
+
+$(bl31): $(src_done)
+ +$(AMAKE)
+ @cp -a $(ATF_SRC_DIR)/build/rk3399/release/bl31/bl31.elf $@
+
+UMAKE := $(HOST_TOOLS_SETTINGS) $(MAKE) -C $(SRC_DIR) BL31=$(bl31) CROSS_COMPILE='$(CROSS_PREFIX)'
+
+$(u_boot): $(bl31)
+ +$(UMAKE) $(u_boot_config)
+ +$(UMAKE)
+ @touch $@
+
+$(uImage): $(u_boot)
+ $(CURDIR)/$(SRC_DIR)/tools/mkimage \
+ -A $(ARCH) -O linux -T kernel -C none -a $(kernel_addr) -e $(entry_point) \
+ -n $(kernel_version) -d $(linux_Image) $@
+
+$(uzImage): $(u_boot)
+ $(CURDIR)/$(SRC_DIR)/tools/mkimage \
+ -A $(ARCH) -O linux -T kernel -C lzma -a $(kernel_addr) -e $(entry_point) \
+ -n $(kernel_version) -d $(linux_zImage) $@
+
+#
+# NOTE:
+# ====
+# eMMC is always mmc0 in u-boot and mmcblk2 in kernel
+# sdhc is always mmc1 in u-boot and mmcblk1 in kernel
+#
+
+$(boot_emmc_script): $(uzImage)
+ @( echo "" > $(boot_emmc_script) && \
+ echo "mmc dev 0" >> $(boot_emmc_script) && \
+ echo "mmcinfo" >> $(boot_emmc_script) && \
+ echo "ext4load mmc 0:1 \$${kernel_comp_addr_r} /boot/uzImage" >> $(boot_emmc_script) && \
+ echo "ext4load mmc 0:1 \$${fdt_addr_r} /boot/rockchip/$(device_dtb)" >> $(boot_emmc_script) && \
+ echo "setenv bootargs 'earlyprintk console=ttyS2,1500000n8 console=tty1 ro root=/dev/mmcblk2p1 rootwait rootfstype=ext4 $(extra)'" >> $(boot_emmc_script) && \
+ echo "bootm \$${kernel_comp_addr_r} - \$${fdt_addr_r}" >> $(boot_emmc_script) \
+ )
+
+$(boot_emmc_scr): $(boot_emmc_script)
+ $(CURDIR)/$(SRC_DIR)/tools/mkimage -A $(ARCH) -T script -C none -n "Boot Script" -d $< $@
+
+$(boot_sdhc_script): $(uzImage)
+ @( echo "" > $(boot_sdhc_script) && \
+ echo "mmc dev 1" >> $(boot_sdhc_script) && \
+ echo "mmcinfo" >> $(boot_sdhc_script) && \
+ echo "ext4load mmc 1:1 \$${kernel_comp_addr_r} /boot/uzImage" >> $(boot_sdhc_script) && \
+ echo "ext4load mmc 1:1 \$${fdt_addr_r} /boot/rockchip/$(device_dtb)" >> $(boot_sdhc_script) && \
+ echo "setenv bootargs 'earlyprintk console=ttyS2,1500000n8 console=tty1 ro root=/dev/mmcblk1p1 rootwait rootfstype=ext4 $(extra)'" >> $(boot_sdhc_script) && \
+ echo "bootm \$${kernel_comp_addr_r} - \$${fdt_addr_r}" >> $(boot_sdhc_script) \
+ )
+
+$(boot_sdhc_scr): $(boot_sdhc_script)
+ $(CURDIR)/$(SRC_DIR)/tools/mkimage -A $(ARCH) -T script -C none -n "Boot Script" -d $< $@
+
+$(build_uboot_pkg): $(boot_emmc_scr) $(boot_sdhc_scr)
+ @mkdir -p $(TARGET_DEST_DIR)/bootfs/u-boot
+ @mkdir -p $(UBOOT_BIN_PKG)/boot/u-boot
+ # ======= install U-Boot images =======
+ @cp -a $(SRC_DIR)/idbloader.img $(SRC_DIR)/u-boot.itb $(UBOOT_BIN_PKG)/boot/u-boot
+ # ======= install signed kernel and script images =======
+ @cp -a $(uImage) $(uzImage) $(boot_emmc_scr) $(boot_sdhc_scr) $(UBOOT_BIN_PKG)/boot
+ @( cd $(UBOOT_BIN_PKG)/boot ; \
+ ln -sf boot.sdhc.scr boot.scr ; \
+ )
+ # ======= install eMMC service scripts =======
+ @cp $(CURDIR)/scripts/{clean-emmc,install-u-boot} $(UBOOT_BIN_PKG)/boot/u-boot
+ @chmod 755 $(UBOOT_BIN_PKG)/boot/u-boot/{clean-emmc,install-u-boot}
+ # ======= copy U-Boot images and binaries into devenv =======
+ @cp -a $(uImage) $(uzImage) $(boot_emmc_scr) $(boot_sdhc_scr) $(TARGET_DEST_DIR)/bootfs
+ @cp -a $(SRC_DIR)/idbloader.img $(SRC_DIR)/u-boot.itb $(TARGET_DEST_DIR)/bootfs/u-boot
+ # ======= install Documentation =======
+ @mkdir -p $(UBOOT_BIN_PKG)/usr/doc/u-boot-$(version)
+ @cp -a $(SRC_DIR)/Licenses $(SRC_DIR)/MAINTAINERS $(SRC_DIR)/README \
+ $(UBOOT_BIN_PKG)/usr/doc/u-boot-$(version)
+ @touch $@
+
+$(boot_records): $(build_uboot_pkg)
+ @$(DD) if=/dev/zero of=$@ bs=512 count=32768 conv=notrunc
+ # ======= Setup u-boot into unallocated space of disk image =======
+ @$(DD) if=$(UBOOT_BIN_PKG)/boot/u-boot/idbloader.img of=$@ bs=512 seek=64 conv=notrunc
+ @$(DD) if=$(UBOOT_BIN_PKG)/boot/u-boot/u-boot.itb of=$@ bs=512 seek=16384 conv=notrunc
+ @touch $@
+
+$(install_boot_records): $(boot_records)
+ @$(BUILDSYSTEM)/install_targets \
+ --destination=$(PRODUCTS_DEST_DIR) \
+ --toolchain=$(TOOLCHAIN) \
+ --hardware=$(HARDWARE) \
+ --flavour=$(FLAVOUR) \
+ $^
+ @touch $@
+
+$(UBOOT_BIN_PKG_DESCRIPTION_FILE): $(UBOOT_BIN_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(UBOOT_BIN_PKG_VERSION)/g" | \
+ $(SED) -e "s/@HARDWARE_SPEC@/$(HW_SPEC)/g"> $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_boot_records) $(UBOOT_BIN_PKG_DESCRIPTION_FILE) $(UBOOT_BIN_PKG_INSTALL_SCRIPT)
+ @cp $(UBOOT_BIN_PKG_DESCRIPTION_FILE) $(UBOOT_BIN_PKG)/.DESCRIPTION
+ @cp $(UBOOT_BIN_PKG_INSTALL_SCRIPT) $(UBOOT_BIN_PKG)/.INSTALL
+ @chmod a+x $(UBOOT_BIN_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(UBOOT_BIN_PKG)/.REQUIRES
+ @echo "pkgname=$(UBOOT_BIN_PKG_NAME)" > $(UBOOT_BIN_PKG)/.PKGINFO ; \
+ echo "pkgver=$(UBOOT_BIN_PKG_VERSION)" >> $(UBOOT_BIN_PKG)/.PKGINFO ; \
+ echo "arch=$(UBOOT_BIN_PKG_ARCH)" >> $(UBOOT_BIN_PKG)/.PKGINFO ; \
+ echo "distroname=$(UBOOT_BIN_PKG_DISTRO_NAME)" >> $(UBOOT_BIN_PKG)/.PKGINFO ; \
+ echo "distrover=$(UBOOT_BIN_PKG_DISTRO_VERSION)" >> $(UBOOT_BIN_PKG)/.PKGINFO ; \
+ echo "group=$(UBOOT_BIN_PKG_GROUP)" >> $(UBOOT_BIN_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(UBOOT_BIN_PKG_SHORT_DESCRIPTION)\"" >> $(UBOOT_BIN_PKG)/.PKGINFO ; \
+ echo "url=$(UBOOT_BIN_PKG_URL)" >> $(UBOOT_BIN_PKG)/.PKGINFO ; \
+ echo "license=$(UBOOT_BIN_PKG_LICENSE)" >> $(UBOOT_BIN_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(UBOOT_BIN_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: radix-1.9/boot/u-boot/leez-p710/2022.10/PATCHES
===================================================================
Index: radix-1.9/boot/u-boot/leez-p710/2022.10/scripts/clean-emmc
===================================================================
--- radix-1.9/boot/u-boot/leez-p710/2022.10/scripts/clean-emmc (nonexistent)
+++ radix-1.9/boot/u-boot/leez-p710/2022.10/scripts/clean-emmc (revision 206)
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+dd if=/dev/zero of=/dev/mmcblk2 bs=1M count=256
+
+fdisk --wipe=always --wipe-partition=always /dev/mmcblk2 <<EOF
+n
+p
+1
+32768
+
+a
+t
+83
+p
+w
+EOF
+
+mke2fs -t ext4 -L root0 -O 64bit /dev/mmcblk2p1
Index: radix-1.9/boot/u-boot/leez-p710/2022.10/scripts/install-u-boot
===================================================================
--- radix-1.9/boot/u-boot/leez-p710/2022.10/scripts/install-u-boot (nonexistent)
+++ radix-1.9/boot/u-boot/leez-p710/2022.10/scripts/install-u-boot (revision 206)
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+dd if=idbloader.img of=/dev/mmcblk2 bs=512 seek=64
+dd if=u-boot.itb of=/dev/mmcblk2 bs=512 seek=16384
Index: radix-1.9/boot/u-boot/leez-p710/2022.10/u-boot-pkg-description.in
===================================================================
--- radix-1.9/boot/u-boot/leez-p710/2022.10/u-boot-pkg-description.in (nonexistent)
+++ radix-1.9/boot/u-boot/leez-p710/2022.10/u-boot-pkg-description.in (revision 206)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+u-boot: Das U-Boot @VERSION@ (for @HARDWARE_SPEC@ board)
+u-boot:
+u-boot: Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for
+u-boot: Embedded Power Architecture(R), ARM, MIPS, x86 and other processors.
+u-boot: The U-Boot project is hosted by DENX.
+u-boot:
+u-boot: Home page: http://www.denx.de/wiki/U-Boot
+u-boot: DENX Git Repository: https://source.denx.de/u-boot/u-boot
+u-boot:
+u-boot:
+u-boot:
Index: radix-1.9/boot/u-boot/leez-p710/2022.10/u-boot-pkg-install.sh
===================================================================
--- radix-1.9/boot/u-boot/leez-p710/2022.10/u-boot-pkg-install.sh (nonexistent)
+++ radix-1.9/boot/u-boot/leez-p710/2022.10/u-boot-pkg-install.sh (revision 206)
@@ -0,0 +1,54 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then
+ # toss the redundant copy:
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: radix-1.9/boot/u-boot/leez-p710/2022.10/u-boot-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: radix-1.9/boot/u-boot/leez-p710/2022.10
===================================================================
--- radix-1.9/boot/u-boot/leez-p710/2022.10 (nonexistent)
+++ radix-1.9/boot/u-boot/leez-p710/2022.10 (revision 206)
Property changes on: radix-1.9/boot/u-boot/leez-p710/2022.10
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: radix-1.9/products/base/Makefile
===================================================================
--- radix-1.9/products/base/Makefile (revision 205)
+++ radix-1.9/products/base/Makefile (revision 206)
@@ -68,7 +68,7 @@
ifneq ($(filter $(HARDWARE),$(HARDWARE_LEEZ_P710)),)
REQUIRES = boot/kernel/leez-p710/6.1.53
-REQUIRES += boot/u-boot/leez-p710/2023.04
+REQUIRES += boot/u-boot/leez-p710/2022.10
endif
ifneq ($(filter $(HARDWARE),$(HARDWARE_ORANGE_PI5)),)
Index: radix-1.9/sources/U-Boot/denx/Makefile
===================================================================
--- radix-1.9/sources/U-Boot/denx/Makefile (revision 205)
+++ radix-1.9/sources/U-Boot/denx/Makefile (revision 206)
@@ -7,7 +7,7 @@
url = $(DOWNLOAD_SERVER)/sources/U-Boot/denx
-versions = 2023.04 2023.07
+versions = 2022.10 2023.04 2023.07
tarballs = $(addsuffix .tar.bz2, $(addprefix u-boot-, $(versions)))
sha1s = $(addsuffix .sha1sum, $(tarballs))
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
384 Commits
1 Branch
1 Tag