Radix cross Linux Build System

Index: build-config.mk.template
===================================================================
--- build-config.mk.template	(revision 22)
+++ build-config.mk.template	(revision 23)
@@ -56,6 +56,7 @@
 ENABLE_ORANGE_PP     = false
 ENABLE_ORANGE_PL2    = false
 ENABLE_WECHIP_TX6    = true
+ENABLE_REPKA_PI3     = true
 
 # TARGET: arm-s8xx-linux-gnueabihf:
 ENABLE_M201          = false
Index: constants.mk
===================================================================
--- constants.mk	(revision 22)
+++ constants.mk	(revision 23)
@@ -286,8 +286,15 @@
 WECHIP_TX6_USE_BUILT_GCC_LIBS    = yes
 WECHIP_TX6_ENABLE_STATIC         = no
 
+####### Repka Pi 3 [https://repka-pi.ru]:
+HARDWARE_REPKA_PI3               = repka-pi3
+###                               |---HW-spec-handy-ruler-----------------------|
+REPKA_PI3_SPEC                   = Repka Pi 3 SBC \(Linux, GNU Libc based\)
+REPKA_PI3_USE_BUILT_GCC_LIBS     = yes
+REPKA_PI3_ENABLE_STATIC          = no
 
 
+
 ####### Microcontrollers:
 ####### ----------------
 
@@ -654,6 +661,7 @@
      ORANGE_PP_ID_STD = 1001
     ORANGE_PL2_ID_STD = 1002
     WECHIP_TX6_ID_STD = 1003
+     REPKA_PI3_ID_STD = 1004
           M201_ID_STD = 1101
            MXV_ID_STD = 1102
           P201_ID_STD = 1201
@@ -909,7 +917,7 @@
 
 H5_GLIBC_HAS_PATCHELF        = yes
 
-H5_GLIBC_HARDWARE_VARIANTS := $(HARDWARE_ORANGE_PP) $(HARDWARE_ORANGE_PL2) $(HARDWARE_WECHIP_TX6)
+H5_GLIBC_HARDWARE_VARIANTS := $(HARDWARE_ORANGE_PP) $(HARDWARE_ORANGE_PL2) $(HARDWARE_WECHIP_TX6) $(HARDWARE_REPKA_PI3)